Girth work MityVac Hydro Vac Penis Pump User Instructions

Shion said:
Grateful for all of the advice as always!
Welp, Week 1, here's what I ran into:

(1) I got up to about 7Hg but stayed at a steady 5Hg, depressurizing frequently for safety. At the end of the session, the bottom of my foreskin was noticeably swollen. Paraphimosis, Google called it. Is that the same thing as that fluid retention that people have been talking about? Most places I looked said if it was caused by pumping it should go away within 24 hours, though it was a bit of a nausea-inducing shock to see it so unexpectedly when the session seemed to go so well. That and
View attachment 1823094
the last orgasm stung a bit. Fluid retention sounded a lot less disturbing than it looked. Guess I'll be trying that silisleeve again; might have to cut it like Lightning mentioned. When I get thin, and I don't have a big thing of fat down there, then I'm sure the full-length silisleeve should work better for me. How long should I give the swelling before trying again, do you think?

(2) Shaving closer definitely helps retain pressure. I bought a Philips Norelco Bodygroomer 7000. Works like a charm. That and I think the new parts made a difference too. I bought it for my body but I think I might get a second one for my face. (I don't wanna use the same razor on my face as for my body.)

(3) I don't feel a lot of pain from the pressure, but my dick often sticks to the plastic walls. I know this can probably be alleviated with the sleeve, but I'm thinking perhaps I'll need to lube the walls too? Or is there something else that can be done?

(4) Since I'm pumping along with physical fitness I guess I ought to ask...does the same kind of diet you'd want to use for fitness also apply to a penis enlargement routine? I've been limiting sugars, consuming moderate complex carbs on cardio days and proteins on muscle days. Surely the same healthy food should help the penis, yeh?

Gonna get some shuteye; TGIF tomorra.
Click to expand...
Try a bit of lube, oil or cream that melts easily with or without silicon sleeves
DLD said:
For what reason my brother?
Click to expand...
Helps the silicon or the penis not stick to inside of the MityVac
 
I use lotions and oils as an alternative to lube. I just find lube very off-putting, and it gets messy, sticky....bleh!

The oils and lotions also do wonders for your skin. Plus, I go hard on my unit, and sometimes need to pumice from all the manual stretching. So, the softer and more moisturized the better!

Yeah, that pumice note made you cringe, hehe. Not as bad as it sounds, LOL.
 
TuffDong said:
I use lotions and oils as an alternative to lube. I just find lube very off-putting, and it gets messy, sticky....bleh!

The oils and lotions also do wonders for your skin. Plus, I go hard on my unit, and sometimes need to pumice from all the manual stretching. So, the softer and more moisturized the better!

Yeah, that pumice note made you cringe, hehe. Not as bad as it sounds, LOL.
Click to expand...
Well i guess thats why you are tuff dong lol! What kind of pumice ? @TuffDong
 
That little pin came out of my MityVac today while pumping, was looking for my needle nose pliers but haven't found them yet ?
I figured they would work best to get that pin back in place.
Does anyone have any ideas how to get that pin back in place...?
 
BoomBoomScooter said:
Got lucky, 3rd time trying it: with 2 screw driver bits... ? ?
Click to expand...


giphy.gif
 
Are there any plans to make a shorter attachment for water pumping with mitty? I only use it for dry pumping and occasional water as its much easier to use my x40 while i shower. I tried a few times and the lines are everywhere. Im sure you guys can think of something you are the best!!
 
SupposedToBeBig said:
Are there any plans to make a shorter attachment for water pumping with mitty? I only use it for dry pumping and occasional water as its much easier to use my x40 while i shower. I tried a few times and the lines are everywhere. Im sure you guys can think of something you are the best!!
Click to expand...

Great question I would send it to [email protected]. Lightning makes all of the equipment.
 
Hi,

I have been trying the hydro aspect of the MityVac and I keep getting water into the pump.

I think I may be using too much water. What is the recommended water level would you suggest? :)
 
Put just enough water to cover the penis and make sure there is air space above. When you pump, keep the top of the cylinder tilted upward to avoid water getting onto the air tube.
 
Lightning said:
Put just enough water to cover the penis and make sure there is air space above. When you pump, keep the top of the cylinder tilted upward to avoid water getting onto the air tube.
Click to expand...

Thank you kindly for the response. I actually figure this out last night before I read this message. The other element I added was to lay in a tub of water which helped as well. :)
 
kyomoto said:
I have a bathmate but find it to be tedious to be using water that's why I ask about efficiency
Click to expand...

the Mityvac Does air and water perfectly. The Bathmate was created mainly to use with water but some men have had some success using it for air but if you really want a good air and water pump I would go with the Mityvac.
 
Borrowing this thread for something on my mityvac.
I’ve got my mityvac less then a month ago and today I discovered rusting at the steel pipe that shows when you’re pushing the handle. I thought it would be waterproof…? I always push out any water out after training and letting it hang so any remaining water and dry/drain. Don’t wanna mess the pump up.. imma attach some pics of it and please tell me if you know what I should do with it…7E29576B-85E0-45F6-962A-431449DA51C2.jpegB2497FD2-F199-41F1-AC08-59BBAFB87F5A.jpeg
 
Answer you in your other thread. Also keep metal parts oiled with wd40 or the like.
 
A friend of mine used a pump for years to remove nitric oxide from a chamber. When repairing the plumbing, the pump was allowed to run free, sucking in room temperature air. Nitrogen dioxide blew out of the pump in great clouds, requiring evacuation of the lab.
 
derekparle said:
A friend of mine used a pump for years to remove nitric oxide from a chamber. When repairing the plumbing, the pump was allowed to run free, sucking in room temperature air. Nitrogen dioxide blew out of the pump in great clouds, requiring evacuation of the lab.
Click to expand...
wtf? haha
 
Good evening I received my mythicvac yesterday. I had been using the bathmate x40 for a month and since yesterday I started with the myticvac. I find it more comfortable and certainly knowing what pressure we're working at is a big plus. Use with warm water. I've read the entire forum but still have some questions.
Is it better to do a 15-minute workout all in one set or do 3 sets of 5 minutes? I do 3 sets of 5 minutes to avoid swelling. But perhaps with the sleeve I can avoid swelling and do only one series, if it's preferable.
I'm pumping at 7hg and honestly it doesn't bother me at all, I feel like I could go up a bit too. Surely with the bathmate I used more pressure. I just find many red dots at the end of the session. Is it ok to use 7 hg?
I have noticed a difference with the bathmate. With the latter the red dots formed mainly at the base, while with the myticvac they form along the entire length.
How do you think?
I do 5 minutes of stretching before the pump. Is it right to do this before using the mytivac?
One important thing that I didn't understand. Is it how many days to train with the pump? Everyday? Or is it better to do it every other day?
Thank you.
 
Last edited:
At 7hg, you are using too much pumping pressure. When working on girth, below is the best routine:

5mins pumping at 5hg
5mins to 10mins SSJ

5mins pumping at 5hg
5mins to 10mins SSJ

5mins pumping at 5hg
5mins to 10mins SSJ
 
Until I pick up a lengthmaster, in the meantime I'm testing to see if it would have any effect to attach the pump and pull gently outwards, adjusting the pressure as I go. It's hard to feel if it's working on the outer/inner penis while pulling, but it seems like it couldn't be a bad supplement to a length routine, especially if it gets any trickle of girth in there along the way.
 
Excuse me, could you tell me how many days a week it is advisable to train? And how often? One more tip. My penis at 5/6 hg totally touches the walls of the cylinder. Can you recommend a larger diameter cylinder? Consider that I want to prefer the length
 
Last edited:
Davide1977 said:
Excuse me, could you tell me how many days a week it is advisable to train? And how often? One more tip. My penis at 5/6 hg totally touches the walls of the cylinder. Can you recommend a larger diameter cylinder? Consider that I want to prefer the length
Click to expand...

You will need a bigger cylinder. Get the pump that is next in size to the current one you are using. If for example you are using a 1.75 cylinder pump, switch to 2 Cylinder pump.

If you are using 2 cylinder and it's tight, switch to 2.25.
 
Davide1977 said:
Ok thanks I had a 2 cylinder, today I ordered the 2.25. Could you tell me something about training days and breaks? Thank you
Click to expand...

When training girth, some people train daily. Some train 5 days a week and two days off. It depends on what you can do. Off days are not advisable because they can lead to holiday from PE.
 
Hey Mike...I hate to hijack this thread, but the quick-disconnect valve (the piece that threads-into the top of the cylinder) broke on my MityVac. Is there a way for me to purchase a replacement?
BTW, I've been consistently training and can reach over 21cm in the tube...which equates to about 8.5" BPEL. It's been a looooong road, but I've gained over 2" in length and about 1.5" in girth over the last 8 or so years
 
Big Schwanz Acht said:
Hey Mike...I hate to hijack this thread, but the quick-disconnect valve (the piece that threads-into the top of the cylinder) broke on my MityVac. Is there a way for me to purchase a replacement?
BTW, I've been consistently training and can reach over 21cm in the tube...which equates to about 8.5" BPEL. It's been a looooong road, but I've gained over 2" in length and about 1.5" in girth over the last 8 or so years
Click to expand...

Congratulations, you have had a good consistency in using the pump for 8 years. I hope I have the same consistency as you. Since you will certainly be an expert, could you tell me which is the routine with which you have had the most gains? I mean times inside the pump, whether shorter sets or a single longer one, how many days you train per week and at what pressure you use the pump. I'm glad to hear you've had gains in length as well as girth though. Did you get these gains using only the pump? Thank you for taking the time to give me an answer.
 
Big Schwanz Acht said:
Hey Mike...I hate to hijack this thread, but the quick-disconnect valve (the piece that threads-into the top of the cylinder) broke on my MityVac. Is there a way for me to purchase a replacement?
BTW, I've been consistently training and can reach over 21cm in the tube...which equates to about 8.5" BPEL. It's been a looooong road, but I've gained over 2" in length and about 1.5" in girth over the last 8 or so years
Click to expand...


Longest time no see senior man. It's good to see you around.
 
You must log in or register to reply here.
Back
Top