Bathmate mod issue

[kyomoto]

My winevac sealer didnt fit over the top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words], could someone help me with a solution? Is it possible to remove the top part of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] without breaking it just to put in the wine vac sealer to pump with?

I might just need to find one with a sealer that fits

nvm I just read "For the pump to work you don't need to have it covering the whole valve just enough to cover the 4 holes on top. Just line up the rubber on top of the holes and put the vac on and pump. It takes a moment to get the cordination down, I like to put the stop over the holes while I have it in the pump. After the first time it stays in place sealed to until I release the pressure. It takes only 10 seconds to realign and pump once you get it down."
basically it does work without having to fit over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words], I guess i'll just do it this way so i dont have to struggle anymore, works great though, can't wait for a session tonight

 

[DLD]

Did you look through this thread: http://www.mattersofsize.com/forum/...3-simple-mod-to-increase-vacuum-pressure.html

 

[kyomoto]

Did you look through this thread: http://www.mattersofsize.com/forum/...3-simple-mod-to-increase-vacuum-pressure.html

yes

 

[Big Schwanz Acht]

It's a bit counter-intuitive at first, but once you realize The VV pump only has to fit over the top 1/4 of the stopper, then you're home-free! Just takes a few sessions to get the hang of it. BTW, don't blow-up your d!ck tonight

 

[kyomoto]

It's a bit counter-intuitive at first, but once you realize The VV pump only has to fit over the top 1/4 of the stopper, then you're home-free! Just takes a few sessions to get the hang of it. BTW, don't blow-up your d!ck tonight

what im doing is just covering the holes of where you would pump, but i cant get it over the whole tip of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words], it still works if i cover the holes which is what im going to do.

 

[Big Schwanz Acht]

I removed the entire [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] valve assembly and put the VacuVin stopper in its place...much simpler IMO

 

[seven_wants_ten]

The only way I could get it to work is by putting a pump sleeve over the top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], and that creates a seal for the VV. I don't use the rubber valve at all, just the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], the VV pump, and the sleeve.

If you look through the recent pages of my picture progress thread I think you can see it. If anyone wants better pictures I can take some.

 

[Big Schwanz Acht]

The only way I could get it to work is by putting a pump sleeve over the top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], and that creates a seal for the VV. I don't use the rubber valve at all, just the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], the VV pump, and the sleeve.

If you look through the recent pages of my picture progress thread I think you can see it. If anyone wants better pictures I can take some.

more than one way to skin a cat

 

[kyomoto]

I removed the entire [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] valve assembly and put the VacuVin stopper in its place...much simpler IMO

So its safe to remove?

- - - Updated - - -

I removed the entire [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] valve assembly and put the VacuVin stopper in its place...much simpler IMO

So its safe to remove?

 

[Big Schwanz Acht]

pops right off...there's a small slot where you can pry it. This eliminates the fiddly valve altogether

 

[seven_wants_ten]

Just like Big Schwanz Acht said, it pops right off. I was nervous to remove mine at first, in case I fucked something up, until I saw it mentioned in official [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] cleaning instructions. It's literally just 2 pieces.

 

[kyomoto]

Thanks guys, i just did a session just now and my god the pressure is amazing, it hurts a slightly but i know its worth ramping up more as i get used to it. And now I see myself noticeably bigger, i imagine this is the fluid retention. I can only do this dry, water doesn't just work for me i have complications, maybe i'll try again another time with water, but i'm definitely going to be using this device like every day.

 

[DLD]

pops right off..

Thanks for helping out here Big! Your advice was very helpful!

 

[seven_wants_ten]

Thanks guys, i just did a session just now and my god the pressure is amazing, it hurts a slightly but i know its worth ramping up more as i get used to it. And now I see myself noticeably bigger, i imagine this is the fluid retention. I can only do this dry, water doesn't just work for me i have complications, maybe i'll try again another time with water, but i'm definitely going to be using this device like every day.

I'm not sure what the issues are, but you really need water in there.

If you're saying that the VV won't work with water, then hold it under water first and let it "fill" as much as possible and quickly get it on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]. I find that the VV needs water before it starts getting good suction.

 

[Big Schwanz Acht]

I'm not sure what the issues are, but you really need water in there.

If you're saying that the VV won't work with water, then hold it under water first and let it "fill" as much as possible and quickly get it on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]. I find that the VV needs water before it starts getting good suction.

I can't agree more, The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] is designed to be used w/water, (although dry can still work, but the density of H2O is the key here). Make sure you jelq between sets to keep FR to a minimum. Glad you got it to work...like I said before 'total game changer'

 

[kyomoto]

I'm not sure what the issues are, but you really need water in there.

If you're saying that the VV won't work with water, then hold it under water first and let it "fill" as much as possible and quickly get it on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]. I find that the VV needs water before it starts getting good suction.

Okay, what I USED to do was just cover the 4 holes on the top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] to create pressure. I couldn't cover the top of it with the VV so i just covered the holes. So when i used it in the shower it was difficult to hold the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] against my body and while slipper because of the water, i had trouble covering the holes and creating pressure all at the same time. But now that I took off the valve piece I will try again another day.

Water doesn't seem that necessary to me. I'll try both just to see if there's much of a difference though.

 

[seven_wants_ten]

Okay, what I USED to do was just cover the 4 holes on the top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] to create pressure. I couldn't cover the top of it with the VV so i just covered the holes. So when i used it in the shower it was difficult to hold the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] against my body and while slipper because of the water, i had trouble covering the holes and creating pressure all at the same time. But now that I took off the valve piece I will try again another day.

Water doesn't seem that necessary to me. I'll try both just to see if there's much of a difference though.

Real talk here...air pumping is damn near useless. There are people who air pump for a decade and make no real gains, because it's mostly fluid buildup. The incompressibility of water doesn't allow the penis the fill with fluid beyond a slow expansion of the tunica. If you google this, you can find some very lengthy articles explaining the physics of it.

 

[kyomoto]

Real talk here...air pumping is damn near useless. There are people who air pump for a decade and make no real gains, because it's mostly fluid buildup. The incompressibility of water doesn't allow the penis the fill with fluid beyond a slow expansion of the tunica. If you google this, you can find some very lengthy articles explaining the physics of it.

sure

 

[DLD]

Real talk here...air pumping is damn near useless. There are people who air pump for a decade and make no real gains, because it's mostly fluid buildup. The incompressibility of water doesn't allow the penis the fill with fluid beyond a slow expansion of the tunica. If you google this, you can find some very lengthy articles explaining the physics of it.

Exactly correct!