NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger

Lightning said:

Update: We are developing a new heavier SiliSleev called the "SiliSleev Duro" for heavy weight hanging with the SiliStretcher . We are aiming to have them available within 6 weeks. They will be the same great elastic durable SiliSleev but much more durable with a thicker wall. We will send a complimentary one out to each SiliStretcherowner if you cover shipping.

Click to expand...

Definitely needed! I want to go beyond 20 pounds! If I could double that weight I could create an unbelievable routine based on the new SRT theory of going from light to heavy, riding the fatigue as we increase weight. So excited!!!!!??

I have been hanging and stretching with the silistretcher for a couple weeks now.

First attempt didn't work at all and I was pretty bummed. Found some pin holes in the sleeve, swapped it out with another and it sorta worked. It would stretch the sleeves too far and my glans would leave the cylinder so I doubled up on the sleeves.

That helped and I feel a much better grip, but now the issue is that when I attach 5lbs the piston wants to unscrew itself! so I have to hold the piston while hanging which is a pain. it would be sweet to be able to lock the piston so it doesn't unscrew. any thoughts on what is going on? I ordered the 2" size as I always seem to get an erection while using an ads and didn't want the 1.5" to be too tight when that happens. Perhaps the 2" size is too large?

Also, the housing has a very small chip at the end where the silisleeves attach. I don't think it is bad enough to cause loss of vacuum but though I would mention that for the sake of the review.

Overall I like the design and look forward to using it but I need to figure out how to prevent the piston from unscrewing while hanging. Oh and I did sleep with it strapped to my leg one night and it worked ot ok, it got a little uncomfortable with the morning wood but wasn't a big problem. fortunately my wife approves of my cock Kung fu as I am able to multi task and getr done without taking much time away from other priorities. That is what is great about devices as I can't dedicate hours of stretching and jelqing, got too much to do other priorities. Slow and steady, make it part of the daily routine like brushing your teeth.

HungforGood said:

I have been hanging and stretching with the silistretcher for a couple weeks now.

First attempt didn't work at all and I was pretty bummed. Found some pin holes in the sleeve, swapped it out with another and it sorta worked. It would stretch the sleeves too far and my glans would leave the cylinder so I doubled up on the sleeves.

That helped and I feel a much better grip, but now the issue is that when I attach 5lbs the piston wants to unscrew itself! so I have to hold the piston while hanging which is a pain. it would be sweet to be able to lock the piston so it doesn't unscrew. any thoughts on what is going on? I ordered the 2" size as I always seem to get an erection while using an ads and didn't want the 1.5" to be too tight when that happens. Perhaps the 2" size is too large?

Also, the housing has a very small chip at the end where the silisleeves attach. I don't think it is bad enough to cause loss of vacuum but though I would mention that for the sake of the review.

Overall I like the design and look forward to using it but I need to figure out how to prevent the piston from unscrewing while hanging. Oh and I did sleep with it strapped to my leg one night and it worked ot ok, it got a little uncomfortable with the morning wood but wasn't a big problem. fortunately my wife approves of my cock Kung fu as I am able to multi task and getr done without taking much time away from other priorities. That is what is great about devices as I can't dedicate hours of stretching and jelqing, got too much to do other priorities. Slow and steady, make it part of the daily routine like brushing your teeth.

Click to expand...

Thank you for the awesome review on the 2" SiliStretcher, glad your wife approves of it and yeah it's great to be able to wear it all day. That is a big cup to sleep in, happy to hear it is working out for you. What is your flaccid head girth?

Two options to lock the piston knob from un-turning.

Option 1: Start with the piston already retracted to 3 full turns before applying the SiliStretcher. This way the piston will be fully retracted and locked when you apply vacuum for the final turns. The piston knob gets 5 full turns before being fully retracted and locked.

Option 2: Sometimes there is too much lube that eases the piston gliding. Remove piston by fully extracting it and wipe away silicon lube on piston rings and inside SiliStretcher and put back together. This prevent the Piston from easily gliding.

You only need one full turn of the SiliStretcher knob to create 10 in-Hg of vacuum which is capable of hanging 10lbs. Two full turns is 15 in-Hg. and capable of hanging up to 18-20lbs.

We are releasing the new SiliSleev Duro sleeves within 6 weeks and they are engineered for heavier hanging with the Silistretcher.

We can replace your SiliStretcher if it has a chip. Just send a picture via PM and we will shoot you out a new one Monday morning.

Thank you for sharing, and please keep us updated!

I eventually exchanged my size doctor for the silistretcher. I received the silistretcher yesterday and I've started using it today.

I used to be a proud owner of a Phallosan fort before and I can confidently tell you that you cannot compare the stretch of the Phallosan with that of the Silistretcher.

If you are not a Vet in PE, I suggest you don't start stretching at max tension with the silistretcher right away. You might just hurt yourself because the stretch from the silistretcher is very very intense. The Phallosan fort is trash when compared with the silistretcher both in terms of comfort and stretching intensity.

The silistretcher also came with some weights but I'm not going to hang for now until I've at least used the silistretcher for 3-6 months.

I've now added the silistretcher to my routine. I'm currently wearing the silistretcher at a very high tension but not the max. Do not wear the silistretcher at max tension at your first stretching set, wait for the day to go by and allow your balls sack to be a bit loose before using the silistretcher to stretch at max tension. Below is new routine henceforth:

Length Master __________ Stretches: 20mins
2 hours stretch with the silistretcher

Length Master __________ Stretches: 20mins
2 hours stretch with the silistretcher

Length Master __________ Stretches: 20mins
2 hours stretch with the silistretcher

I stretch at a very high tension (but not the max tension) during my first 2 hours stretch with the silistretcher in the morning.

I start stretching at max tension from noon. Follow my advice and you will gain massively with the silistretcher.

Henceforth, I will be updating this progress log daily with my routine at the end of the day. I will also measure on the 1st of July.

Lightning said:

Thank you for the awesome review on the 2" SiliStretcher, glad your wife approves of it and yeah it's great to be able to wear it all day. That is a big cup to sleep in, happy to hear it is working out for you. What is your flaccid head girth?

Two options to lock the piston knob from un-turning.

Option 1: Start with the piston already retracted to 3 full turns before applying the SiliStretcher. This way the piston will be fully retracted and locked when you apply vacuum for the final turns. The piston knob gets 5 full turns before being fully retracted and locked.

Option 2: Sometimes there is too much lube that eases the piston gliding. Remove piston by fully extracting it and wipe away silicon lube on piston rings and inside SiliStretcher and put back together. This prevent the Piston from easily gliding.

You only need one full turn of the SiliStretcher knob to create 10 in-Hg of vacuum which is capable of hanging 10lbs. Two full turns is 15 in-Hg. and capable of hanging up to 18-20lbs.

We are releasing the new SiliSleev Duro sleeves within 6 weeks and they are engineered for heavier hanging with the Silistretcher.

We can replace your SiliStretcher if it has a chip. Just send a picture via PM and we will shoot you out a new one Monday morning.

Thank you for sharing, and please keep us updated!

Click to expand...

Awesome thanks for the tips. I did both options and it is working great!

I will pm you with the picture of the chip.

Right there with you Brother!

Edison was fired from his first two jobs for being "non-productive." As an inventor, Edison made 1,000 unsuccessful attempts at inventing the light bulb. When a reporter asked, "How did it feel to fail 1,000 times?" Edison replied, "I didn't fail 1,000 times. I found 1000 ways NOT to make light bulb”

I got mine today in perfect condition with the sleeves!
Package said exercise device, which is true. I tried it just quickly, it's sturdy and I have a gut feeling I'll be making good gains this year.


I'll get on a short session tonight to get a feel of it, I'm quite excited!
On a sidenote, the carrying case is nice, easy to store the tool when needed.
I'll be giving more indepth review within a week, keep on gaining Brothers!

I just realized there are two diameters for the Silistretcher. Guess it all worked out when I ordered it because I got the 1.5" wide version, and just so happens my soft glans is 1.56" across! :D

This is great information!
Thanks to everyone for writing about issues and solutions.
Definitely a big help having purchased the silistretcher.
The instructions are easy and straight forward and then it’s a plus to continue to get advice on it when people are writing about issues.

One thing I was able to do to reuse silisleeve that had small holes in it because I used to much pressure, is simply put it on with holes towards the shaft instead of towards the silistretcher, you know with the thick part of the silisleeves towards me and was able to maintain suction again.
I know I have 4 silisleeves, but just wanted to share in case you find yourself wanting to reuse one of the sleeves while you get another sent.

bluetard117 said:

I just realized there are two diameters for the Silistretcher. Guess it all worked out when I ordered it because I got the 1.5" wide version, and just so happens my soft glans is 1.56" across! LOL

Click to expand...

Nice, there are actually three sizes, 1.1", 1.5" & 2", we took the 2" off the shop page, it is a special request.

JustGrow said:

This is great information!
Thanks to everyone for writing about issues and solutions.
Definitely a big help having purchased the silistretcher.
The instructions are easy and straight forward and then it’s a plus to continue to get advice on it when people are writing about issues.

One thing I was able to do to reuse silisleeve that had small holes in it because I used to much pressure, is simply put it on with holes towards the shaft instead of towards the silistretcher, you know with the thick part of the silisleeves towards me and was able to maintain suction again.
I know I have 4 silisleeves, but just wanted to share in case you find yourself wanting to reuse one of the sleeves while you get another sent.

Click to expand...

Wearing the thicker part of the silisleev toward the pelvic provides more retention and grip. For extra grip, wear the longer silisleev the same way and fold it over.

Lightning said:

It's impossible for the SiliStretcher to lose vacuum unless you cracked the actual unit or have a hole in the SiliSleev. You can return it and we can test it and/or replace it if needed. First dip it in bleach water to sanitize it.

Shop MOS
719 New Bridge Street, #183
Jacksonville, NC 28540-9998

Click to expand...

Alright. Sounds good. Maybe I’m just dumb and ordered the wrong size or something

This SiliStretcher is sooo comfortable ???????

I am done with compression hanging..... At least for now, I am curious to find out what the SiliStretcher will do at heavy weights and I am also waiting on the new silicone sleeve “duro” with the thicker walls.

Now I can go 5-6 hours straight without any interruptions. Thank you MOS !

DutchAthletic92 said:

This SiliStretcher is sooo comfortable ???????

I am done with compression hanging..... At least for now, I am curious to find out what the SiliStretcher will do at heavy weights and I am also waiting on the new silicone sleeve “duro” with the thicker walls.

Now I can go 5-6 hours straight without any interruptions. Thank you MOS !

Click to expand...

You’re welcome my brother! Please go and post this in the store under reviews in the SiliStretcher section. People who are not on the forum need to see these reviews. I’m so happy for you!

Post reviews here?

DLD said:

You’re welcome my brother! Please go and post this in the store under reviews in the SiliStretcher section. People who are not on the forum need to see these reviews. I’m so happy for you!

Post reviews here?

SiliStretcher-2 All Day Penis Vacuum Stretcher and Weight Hanger

STEALTH ALL DAY PENIS STRETCHING & WEIGHT HANGERThe SiliStretcher2 is a simple self-contained vacuum stretcher to permanently enlarge penis size in stealth. 100% Money Back Guarantee, Lifetime Warranty Option - Free USA Shipping‎.With over 16 years of research, the SiliStrecther 2 is the go-to...

shop.mattersofsize.com

Click to expand...

Done ? My review is on the MOS shop

DutchAthletic92 said:

Done ? My review is on the MOS shop

Click to expand...

That’s what’s up! ?

Here is the new inline SiliScale for the SiliStretcher. It measures tension up to 55lbs/ 25Kg in Pounds & Kilograms. This is a really great add on to monitor constant tension when using the SiliStretcher as an ADS.

It can be attached with the linkage as shown so it can be removed when not needed for hanging. Or upon request, we can eliminate the linkage and attach it directly and permanently to the SiliStretcher knob to shorten it by 1.5" (38mm).

Lightning said:

Here is the new inline SiliScale for the SiliStretcher. It measures tension up to 55lbs/ 25Kg in Pounds & Grams. This is a really great add on to monitor tension when using the SiliStretcher as an ADS.

It can be attached with the linkage as shown so it can be removed when not needed for hanging. Or upon request, we can eliminate the linkage and attach it directly and permanently to the SiliStretcher knob to shorten it by 1.5" (38mm).

View attachment 1821305View attachment 1821306View attachment 1821307

Click to expand...

Yes! Absolute must. Love the innovations.

Donneee c said:

Yes! Absolute must. Love the innovations.

Click to expand...

My heads going wild with ideas! How about a weight accurate ADS Reverse Pyramid Extending? That will be precise and gainful!

Lightning said:

Here is the new inline SiliScale for the SiliStretcher. It measures tension up to 55lbs/ 25Kg in Pounds & Grams. This is a really great add on to monitor constant tension when using the SiliStretcher as an ADS.

It can be attached with the linkage as shown so it can be removed when not needed for hanging. Or upon request, we can eliminate the linkage and attach it directly and permanently to the SiliStretcher knob to shorten it by 1.5" (38mm).

View attachment 1821305View attachment 1821306View attachment 1821307

Click to expand...

I already have a silistretcher, is this an add on?

This is great because now you guys will be able to recommend a certain tension or I can see if I was using too much tension.