Setting the SiliStretcher for heavier weight and tension

Lightning · Mar 21, 2019

NOTE: This post does not apply to the new SiliStretcher2 with the DuroSleevs. This is only for the SiliStretcher 1 with the original SiliSleevs

We ship the SiliStretcher - All Day Penis Vacuum Stretcher and Weight Hanger 1 with the regular size 20mm x 85mm SiliSleev attached and 2.5lbs of weight. This set-up is for starting up and is not intended for heavy weight use. We do this so people don't hurt themselves going overboard the first time using.

Keep in mind, the SiliStretcher is currently intended to be used as an ADS and moderate hanger due to the standard SiliSleevs being the limiting factor.

You will be able to perform intense hanging sessions when the SiliSleev Duros become available.

The current idea is to stretch moderately for long periods, not to hang heavy for short periods.

For advanced users looking to temporarily hang heavier weight and higher tensions with the current standard SiliSleevs, here is what you do.

Remove the standard SiliSleev that came attached to the SiliStretcher.

Attach the long 20mm x 145mm SIliSleev to the SiliStretcher with the thin end of the SiliSleev attached to the SiliStretcher and the thicker end towards your pelvic.

The thicker end is less pliable due to it having a thicker band.

Retract the piston half way into the SiliStretcher by turning the piston knob two and a half turns.

Roll back the SiliSleev onto the SiliStretcher.

Insert your penis inside the silistretcher so your glans is about to touch the piston.

Unroll SiliSleeve over the penis with the thick end of the SiliSleev towards the pelvic.

Fold the SiliSleev back over itself to create a greater grip

Turn the piston knob a half turn for 7 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.

You can also put the SIliSleev on your penis first and then attach the SiliSleev to the SiliStretcher if easier for you. Practice makes perfect.

I will post this in the main thread as well.

Super · Mar 21, 2019

I’ll try this weekend

huge-girth · Mar 21, 2019

I think I will just stick to using the silistretcher as an ADS only because I'm scared of damaging something. As long as the stretching is superior to the Phallosan, i will make those gains I seek.

DLD · Mar 22, 2019

huge-girth said:
I think I will just stick to using the silistretcher as an ADS only because I'm scared of damaging something. As long as the stretching is superior to the Phallosan, i will make those gains I seek.

Far superior!

DutchAthletic92 · Mar 26, 2019

I will definitely try this out when I reach my 20 pounds of weight in vaccuum hanging ?

I quit compression hanging at 20 pounds and now i’m building this up again with the SiliStretcher, I am 100% convinced that stretching lots of hours is the way to go, and you’ll be gaining with less than 20 pounds of weight.

I can do 5-6 hours per day on monday -friday and on the weekends hanging after I wake up until I go to bed, that means 15 hours on saturday and sunday. I have 100% complete privacy in my dorm room and nobody will disturb me.

I can go for 40-50 hours of hanging per week and at relatively low weights. I’m tied at my desk studying so this is the ultimate solution in my personal circumstances.

DLD · Mar 26, 2019

Not only lots of hours but lots of hours done the smart way. Please read my theory on Reverse Pyramid training, there is no better way to approach gains! Once you read the theory it will give you some awesome advice in this area.

https://mattersofsize.com/topic/srt...o-make-length-gains-srt-approved-???.1818221/

REDZULU2003 · Apr 8, 2019

This setup will suffice for those wanting to hang more then 10lbs or so, until the more stronger sleeves come into force.

SiliStretcher is ADS, but has evolved into allot more. It will be able to support heavier weights when the new sleeves come out.

Its not that the sleeves on sale are no good, they are very good, but these aren't originally meant to carry heavy weight on them, which can cause issues later on.

When my SiliStretcher arrives, which is tomorrow, I will not use more then 8lbs weight until I get the new sleeves.

DLD · Apr 8, 2019

REDZULU2003 said:
This setup will suffice for those wanting to hang more then 10lbs or so, until the more stronger sleeves come into force.

SiliStretcher is ADS, but has evolved into allot more. It will be able to support heavier weights when the new sleeves come out.

Its not that the sleeves on sale are no good, they are very good, but these aren't originally meant to carry heavy weight on them, which can cause issues later on.

When my SiliStretcher arrives, which is tomorrow, I will not use more then 8lbs weight until I get the new sleeves.

I can’t wait to test the new sleeves and see how happy we can go. I talk to lightning he said he got 60 pounds going. I’d be happy with 50 pounds. I can create a truly amazing routine with this much weight for a very advanced users.

DutchAthletic92 · Apr 9, 2019

DLD said:
I can’t wait to test the new sleeves and see how happy we can go. I talk to lightning he said he got 60 pounds going. I’d be happy with 50 pounds. I can create a truly amazing routine with this much weight for a very advanced users.

Outstanding ! ? and with the reverse pyramid hanging sets everyone can and will get to 10-12 inches erect length !

TopGainer · Apr 9, 2019

DutchAthletic92 said:
I will definitely try this out when I reach my 20 pounds of weight in vaccuum hanging ?

I quit compression hanging at 20 pounds and now i’m building this up again with the SiliStretcher, I am 100% convinced that stretching lots of hours is the way to go, and you’ll be gaining with less than 20 pounds of weight.

I can do 5-6 hours per day on monday -friday and on the weekends hanging after I wake up until I go to bed, that means 15 hours on saturday and sunday. I have 100% complete privacy in my dorm room and nobody will disturb me.

I can go for 40-50 hours of hanging per week and at relatively low weights. I’m tied at my desk studying so this is the ultimate solution in my personal circumstances.

How much did you gain with compression hanger?

DLD · Apr 9, 2019

DutchAthletic92 said:
Outstanding ! ? and with the reverse pyramid hanging sets everyone can and will get to 10-12 inches erect length !

I’m really thinking that this method will become the standard for stretching and hanging. I have no idea why I never thought of it before, it’s such a simple thing but such a powerful thing.

Want to be · May 20, 2019

What is the scheduled release date for the new sleeves. I've been hold off ordering waiting. I almost ordered something's else but thought I would wait for a response here. If there are no updates I'll oreder another ADS later this week.

huge-girth · May 20, 2019

Want to be said:
What is the scheduled release date for the new sleeves. I've been hold off ordering waiting. I almost ordered something's else but thought I would wait for a response here. If there are no updates I'll oreder another ADS later this week.

@lightening @DLD

DutchAthletic92 · May 20, 2019

TopGainer said:
How much did you gain with compression hanger?

I started last year with the hanger, but I had to quit after four months because it was taking too much time.

I was still in the initial beginner’s phase but i’d gained a few mm’s in BPFSL. I am a student and it was a fucking hassle to take it off every damn 20 minutes. I couldn’t multitask and focus properly on studying because I was interrupted every 20 mins. Also the re-wrapping and massaging , restoring blood circulation took alot of time. the SiliStretcher is way more convenient and you can go for 1 hour and then have a small break and check up.

If I had the time to hang all day long with the hanger I would have been 8”-8.5” BPEL by now. That’s for sure. Only the time commitment man. Time investment is everything.

I did in total 6x20 minute sets per day. 7 days a week. That is the minimum amount of time you need to make gains in hanging. That’s only 2 hours per day but it makes 3-3.5 hours with all the hassle of rewrapping every 20 mins, resting, other stuff going on and it wasn‘t sustainable while being a student in a very demanding undergraduate program.

huge-girth · May 20, 2019

DutchAthletic92 said:
I started last year with the hanger, but I had to quit after four months because it was taking too much time.

I was still in the initial beginner’s phase but i’d gained a few mm’s in BPFSL. I am a student and it was a fucking hassle to take it off every damn 20 minutes. I couldn’t multitask and focus properly on studying because I was interrupted every 20 mins. Also the re-wrapping and massaging , restoring blood circulation took alot of time. the SiliStretcher is way more convenient and you can go for 1 hour and then have a small break and check up.

If I had the time to hang all day long with the hanger I would have been 8”-8.5” BPEL by now. That’s for sure. Only the time commitment man. Time investment is everything.

I did in total 6x20 minute sets per day. 7 days a week. That is the minimum amount of time you need to make gains in hanging. That’s only 2 hours per day but it makes 3-3.5 hours with all the hassle of rewrapping every 20 mins, resting, other stuff going on and it wasn‘t sustainable while being a student in a very demanding undergraduate program.

I will choose the LengthMaster - Penis Bundle Stretcher & Weight Hanging over any hanger as far as PE is concerned. The maximum you need to train daily with the LengthMaster is 1 hour and you will never hit any plateau as long as you are using the right amount of intensity and changing your routine every 3 months.

The LengthMaster is the best length device worldwide.

DutchAthletic92 · May 20, 2019

huge-girth said:
I will choose the LengthMaster over any hanger as far as PE is concerned. The maximum you need to train daily with the LengthMaster is 1 hour and you will never hit any plateau as long as you are using the right amount of intensity and changing your routine every 3 months.

The LengthMaster is the best length device worldwide.

If you have the time for it, it’s a good device certainly. I only have the time for 10 mins of bundled stretching, and I hang for the rest of the night usually. Hands free PE is in my student phase the most convenient option.

Also the intensity by hand is very different than hanging weights. I cannot replicate 4-5 hours of hanging at a certain intensity (weight) with the lengthmaster. It’s a matter of experimenting and finding out how your tunica responds the best to various exercises. I believe I need to invest long hours in order to break down my scarred tunica full of fibrosis.

DLD · May 20, 2019

huge-girth said:
@lightening @DLD

Next week they will be shipping

Want to be · May 20, 2019

When can I order?

DLD · May 20, 2019

Want to be said:
When can I order?

There will be a very big announcement that you will not miss, believe me. It will be sometime next week.

heh92 · May 21, 2019

Hi guys, I wanna ask.

1. How heavy can you hang with the silistretcher?

2. Is it the device itself or is it the duros sleeve that allow for the heavier weights? When will the sleeve be out?

3. Can i buy only the silistretcher without the weight plates? It gets way too expensive with those

Setting the SiliStretcher for heavier weight and tension

@Lightning

Well-known member

Moderator

doublelongdaddy

0

doublelongdaddy

Well-known member

doublelongdaddy

0

0

doublelongdaddy

Member

Moderator

0

Moderator

0

doublelongdaddy

Member

doublelongdaddy

0

Similar threads