It seems like the longer your sleeve, the more elongated you will stay, and the less likely your “stuff” will shift or slip. Like DLD said the LG sleeves are meant for hanging heavy weight. They are a SOB to get on if you’re pretty thick in the flaccid state. What I had to do with mine is cut them into segments. The duro, however, is better for use during stretching, and ads application.
NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger
- Joined
- Feb 25, 2013
- Messages
- 16,702
This is a welcome development. Waiting for the big announcement
- Joined
- Aug 20, 2017
- Messages
- 163
When we created the duro, we wanted something very strong for people wanting to hang heavy weight or perform intense stretching and have a sleeve that s built to last a while. LG has sleeves that are very hard to apply and very restrictive but also good for hanging heavy weight. We wanted something similar but more realistic for the end user to put on and take off frequently.
Keep in mind, you can enlarge the Duros by putting them on a pipe that is a bit thicker overnight.
In a few weeks we will have additional diameter Duros including a 7/8" version, 1 1/8" version and the new long DuroCaps. With all 4 diameters, there will be something for everyone.
The DuroSleev line up will be
3/4" x 5.7" & 4"
7/8" x 8" & 4"
1" x 5.7" & 4"
1-1/8" x 8" & 4"
and 7/8" x 8" Duracaps
We may also have a SiliSleevs in the same sizes but a slightly stronger formula in the near future.
We will definitely be the one stop shop for sleeves.
Is there anyway I can get the durosleeves back to their original shape? I use the silistretcher about 8 hours a day and take the sleeve off the silistretcher after. Even doing this, the sleeve is still slightly deformed and is losing some of the tightness that it once had.
- Joined
- Jun 3, 2003
- Messages
- 4,176
Anything that is elastic and skin safe will stretch out over time (including silicone, latex, rubber, etc). There is no way to counteract this and all sleeves face this issue. We are testing harder materials but anything harder will also be harder to apply and remove.
If you are losing tightness over time, you can wrap the sleeve with a band which also will loosen up over time. We will be releasing 2" long DuroBands that will be fairly inexpensive for a pack and will help with this.
- Joined
- Aug 20, 2017
- Messages
- 163
A good way I've noticed to combat this issue is putting the sleeve barely on the silistretcher then when it begins to weaken and lose strength put more of the sleeve on the stretcher. That way you always can have new sleeve around the opening as the wide opening is what causes the sleeve to deform. I believe doing this you could lengthen the life of a sleeve for the silistretcher considerably.
- Joined
- Jun 3, 2003
- Messages
- 4,176
When we release the 8" long DuroSleevs, you will have more sleeve to work with because they are cuttable by the end user.
Is anyone just trying the Silistretcher by itself without any other methods and see if they get growth?
I was just wondering.
I’m not willing to try right now as currently my routine consists of manual work then the Silistretcher for healing.
I was just wondering.
I’m not willing to try right now as currently my routine consists of manual work then the Silistretcher for healing.
Not to worry you will get good feedback from everyone.
How are you wearing the Silistretcher?
Long sleeve?
Short sleeve?
Silicap?
Silipad?
Belt around the waist or to the knee?
Silistrap?
How many turns on the Silistretcher?
etc?
Is your glans at the tip of the Silistretcher bell or do you turn the piston and start further in the Silistretcher bell?
Last edited:
hey @JustGrow thx for the reply.
i've tried with both the long sleeve and short sleeve.
i always wear the silicap .
i wear the silistrap attatched to right below my knee, (i usewhen im sitting down in front of computer)
the silistretcher is usually retracted all the way to the top when i use it, and then just give it 1 twist.
but i tried something new today where i did 3 turns beforehand , and then after inserting i did half a turn. (as suggested by another user)
so my routine is this.
1. retract piston all the way to the top (picture 1)
2.attach sleeve to bell and fold sleeve over itself so that i can insert easier (picture 2)
3.insert until i touch the comfort pad and this creates and airtight seal.
4. turn/twist 1 time
5. roll remainder of sleeve over penis.
ive had 2 rare ocasions where everything went fine, but not sure what i did.
i have also noticed that silicap never conforms to my gland all the way, there is always a bit of space between the tip of my head and the silicap.
i've tried with both the long sleeve and short sleeve.
i always wear the silicap .
i wear the silistrap attatched to right below my knee, (i usewhen im sitting down in front of computer)
the silistretcher is usually retracted all the way to the top when i use it, and then just give it 1 twist.
but i tried something new today where i did 3 turns beforehand , and then after inserting i did half a turn. (as suggested by another user)
so my routine is this.
1. retract piston all the way to the top (picture 1)
2.attach sleeve to bell and fold sleeve over itself so that i can insert easier (picture 2)
3.insert until i touch the comfort pad and this creates and airtight seal.
4. turn/twist 1 time
5. roll remainder of sleeve over penis.
ive had 2 rare ocasions where everything went fine, but not sure what i did.
i have also noticed that silicap never conforms to my gland all the way, there is always a bit of space between the tip of my head and the silicap.
- Joined
- Jun 3, 2003
- Messages
- 4,176
Sounds like you may be using it wrong. @JustGrow asked the right questions. You only need a half turn to secure your penis and make sure you are using a silicap or micropore tape on your glans. Also the SiliPads help with this.
Try using a needle to make a pin hole in the silicap to help it release air and conform to the glans.
The hole in the Silicap really helps.
I did the same thing except I took a knife and push through for a very very small slit in the Silicap tip. This is at your own risk don’t think that’s covered.
I think what happens sometimes is that the Silicap slides forward and adds extra vacuum to the tip and that is what creates the fluid build up.
Also try a quarter turn instead of a 1/2 turn.
For me the Silistrap helps when I am pointed straight up.
I have not tried the grip powder, but I think a few members have and it’s worked for them.
Also try rolling the Silicap like a condom and rolling it on the glans. This will help so that not that much of a bubble is created.
Hope this helps.
Do you by chance have the Siliscale, so that you can get a baseline of how much pull you are using?
- Joined
- Jun 3, 2003
- Messages
- 124,583
No problem my brother that’s what we’re here to do is to help you. Please be patient with yourself and gentle and give it another go, I promise you that you will master this. So take your time and please use us to help you in anyway.
How far are you going into the silsistretcher? Looks like u need to go further in I turn mine about how way up the silsistretcher or more then enter it so all/most of my gland/ head is in it
I gained 1/8 of an inch in about a month & 1wk with 513 hrs use but had issue w silistretcher n got a new one sent out put haven't used it yet some life stuff came up. Gonna try n get back on pe wagon tonight
- Joined
- Feb 25, 2013
- Messages
- 16,702
The silistretcher will surely bring quick gains. In the new 2 years, we will have numerous members with extremely long penis all over the forum. All thanks to the silistretcher.
- Joined
- Jun 3, 2003
- Messages
- 4,176
SiliStretcher2 starts shipping today! We have 1.25" and 1.5" diameters available now.
Introducing the new SiliStretcher2
We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS /Hanger combo even better!
New features
Our new thicker acrylic formula system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher .
Our new semi transparent SiliSleev Duros (DuroSleevs ) will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis. Users are effectively hanging up to 30lbs with the SiliStretcher2 and DuroSleevs.
The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.
We've added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleevDuro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher . This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.
We've added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.
Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply). Email sales@mattersofsize.com with your name and email that you used on your original order.
Introducing the new SiliStretcher2
We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS /Hanger combo even better!
New features
- Reduction to the overall length for stealth and strength
- A new thicker acrylic formula for strength
- New long lasting SiliSleev Duros to intensify your stretches
- Improved vacuum piston system for grip
- New deeper SiliPads to control fluid retention
- DuroBand to add a layer of protection around the SiliStretcher rim
- New 1.25" (3.2mm) diameter available
Our new thicker acrylic formula system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher .
Our new semi transparent SiliSleev Duros (DuroSleevs ) will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis. Users are effectively hanging up to 30lbs with the SiliStretcher2 and DuroSleevs.
The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.
We've added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleevDuro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher . This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.
We've added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.
Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply). Email sales@mattersofsize.com with your name and email that you used on your original order.
- Joined
- Feb 25, 2013
- Messages
- 16,702
