New Routine idea (any good?)

When I last cleaned the bathmate, the valve bit that you open and close during each pump was positioned back on different from when it was first bought, so when Im opening it to pump, it doesnt feel fullly “clicked” back closed to hold in place. Could that be effecting it at all?

Cleareyes said:

When I last cleaned the bathmate, the valve bit that you open and close during each pump was positioned back on different from when it was first bought, so when Im opening it to pump, it doesnt feel fullly “clicked” back closed to hold in place. Could that be effecting it at all?

Click to expand...

Do the black "switch" on the valve stay in place? Or do it just go back to the Center? When you fill up with water do the water stay inside the pump until you position the black "switch" in the middle. It's only function is to not release the water when you fill the pump up with water. It should not impacted the maximum pressure. Since there is a gasket there.

I had a problem with a Bathmate pump that didn't keept the water when I filled it up with water. The switch didn't stay in place. I got a replacement valve and it fixed it.

You should never take of the replacement valve if you are going to clean the pump. They are to sensitive to do that back and forth, they are not made to function like that. The only time when you should take of the replacement valve is if it starts to leak, and/or the black switch doesn't stay in place and to the side, then you should replace it with a new replacement valve.

If cleaning, take mild liquid hand soap a little of it, and rinse through the pump with water.

I hope this helps.

The water does stay in when i close the valve, however at times the maximum length i get up to in the bathmate does go down a bit quite quickly and doesnt stay at the max i got to for long, so i then repump to get back close to where I was pumped up to on the bathmate. Im not sure what I could be doing wrong to not get more than 0.2 expansion

Cleareyes said:

The water does stay in when i close the valve, however at times the maximum length i get up to in the bathmate does go down a bit quite quickly and doesnt stay at the max i got to for long, so i then repump to get back close to where I was pumped up to on the bathmate. Im not sure what I could be doing wrong to not get more than 0.2 expansion

Click to expand...

I will help you in figuring this out.

Cleareyes said:

No, it doesn’t hurt, i just feel some pressure.

So i enter the pump fully erect. Do one pump every few seconds until I cant pump any more/ where the water stops coming out the front which i assume means its at max pressure and then i stand and hold it for the 5 minutes, do 5mins of SSJs then repeat.

Click to expand...

I've tried to figure out what the problem is. I will tell you one thing, get the bathmate extreme pump. It seems to me that your penis has adapted to the pumping pressure of the regular bathmate. The bathmate extreme has a hand pump which enables you to pump at higher pressure.

Lastly, I hope there is space inside the pump for you to expand? Your penis is not touching the walls of the pump right?

I will have a look into the extreme pump, thank you.

i can get close to the top of the bathmate with a strong pump length wise, however I still have a good amount of room in terms of girth/width within the bathmate.

Cleareyes said:

The water does stay in when i close the valve, however at times the maximum length i get up to in the bathmate does go down a bit quite quickly and doesnt stay at the max i got to for long, so i then repump to get back close to where I was pumped up to on the bathmate. Im not sure what I could be doing wrong to not get more than 0.2 expansion

Click to expand...

Okey now I understand, you don't have a HydroXtreme version of the pump. No worries, you can make it work with a Hydromax version as well, I started with the Hydromax 5.
- What version do you have?
Well then you are maxed out by the gator (rubber agains your body).

Do you have any air pocket at the base in your pump? If so you need to add more water in the
beginning of your pumping, make sure you do not spill out water when you stick in your penis.

I don't think It's anything wrong with your pump. It may be that your pump technique needs some tuning. It took some time for me to get my pumping technique perfect when I started to use Bathmate pumps.
This behavior is normal for these pumps (your penis shrinks at length), especially if you max out the girth on a Hydromax pump (without the external pump).

Don't focus on the length of your penis expansion. You also expand at the girth it may be so that after some time in the pump your penis deforms and expands more at the girth, therefore less expansion at the lenght. In the beginning in the Hydomax 5 my penis didn't expand at all at length, it looked like a mushroom shape. This will be better if you keep at it.

I have also experienced this shrinkage at the lenght inside the pump. Even with maximum pressure. This is most frustrating when you use a Hydomax pump, since when the "gator" (rubber part against your body) is maxed out, that is compressed to the max, and you can not add pressure later on, in the 5 minutes you stay inside the pump.

But just make sure you keep the water level high in the pump, and increase the pressure at max, keep the water as warm as possible without burning your penis, then just stay inside the pump for 5 minutes according to the Girth Program: 5x5x3.

Keep the pressure high and with time you will get more expansion. This was my experience in the beginning with these pumps. You need to be patient and keep the pressure high. Your penis will eventually adapt and start to expand more.

Cleareyes said:

I will have a look into the extreme pump, thank you.

i can get close to the top of the bathmate with a strong pump length wise, however I still have a good amount of room in terms of girth/width within the bathmate.

Click to expand...

Have you maxed out the pump at the length?
How much room do you have left?

I have the Bathmate HYDROMAX5 Penis Pump Clear 3-5 Inches.
I am around 5.2 in length so i assumed this was the best one to get. I got this in Feb 2020.
I dont run out of space completely in length in the bathmate but at max pump i get pretty close to it recently.

Cleareyes said:

I have the Bathmate HYDROMAX5 Penis Pump Clear 3-5 Inches.
I am around 5.2 in length so i assumed this was the best one to get. I got this in Feb 2020.
I dont run out of space completely in length in the bathmate but at max pump i get pretty close to it recently.

Click to expand...

It's the best one for you.
You have a lot of room to expand in, no worries. Do your glans touch the valve at the top? 3-5 inches from the top?

squirt_inducer_man said:

It's the best one for you.
You have a lot of room to expand in, no worries. Do your glans touch the valve at the top? 3-5 inches from the top?

Click to expand...

i would say my glans is about 1.5 - 2 inches away from the top of the bathmate at full pressure, usually it subsides a bit to maybe 3-4inches after a minute or two and stays there for the 5mins. Do you think I should stick with the bathmate i have currently then?

Cleareyes said:

i would say my glans is about 1.5 - 2 inches away from the top of the bathmate at full pressure, usually it subsides a bit to maybe 3-4inches after a minute or two and stays there for the 5mins. Do you think I should stick with the bathmate i have currently then?

Click to expand...

Yes 1,5 - 2 inches are a lot.
Remember you can expand the entire cylinder in girth also.
Keep pushing hard. If you feel like you lost to much pressure. You can stop the timer, then release the pressure...start over, and then push up the pressure again, and then start the timer again (where it was). This is how I did it and still are doing it even today.

I’m going to be doing a girth session in a few hours. I will focus on the bathmate part of the routine today and see if I can get a bit more expansion than normal and report back

Cleareyes said:

I’m going to be doing a girth session in a few hours. I will focus on the bathmate part of the routine today and see if I can get a bit more expansion than normal and report back

Click to expand...

That sounds awesome brother. You will get far.
If you are persistent you will max out that pump/tube in girth and length. It's a wonderful feeling, to max out girth and you start to fill the entire tube from bottom to the top.

By the way: Don't know if I have asked this before, but have you removed the comfort insert?

squirt_inducer_man said:

That sounds awesome brother. You will get far.
If you are persistent you will max out that pump/tube in girth and length. It's a wonderful feeling, to max out girth and you start to fill the entire tube from bottom to the top.

By the way: Don't know if I have asked this before, but have you removed the comfort insert?

Click to expand...

yes, I actually havent used that comfort insert in over a year.

Cleareyes said:

yes, I actually havent used that comfort insert in over a year.

Click to expand...

Good that insert is worthless, it just hinders your expansion. 😊

So i completed another 5x5x3 routine. Went harder on the SSJs and even got within an inch of filling bathmate in length. This is only the difference I’m seeing when measuring after.

The blue is what i am before in girth and the red line is after a girth routine. Not sure what else i could be doing better to increase this.

Cleareyes said:

So i completed another 5x5x3 routine. Went harder on the SSJs and even got within an inch of filling bathmate in length. This is only the difference I’m seeing when measuring after.

The blue is what i am before in girth and the red line is after a girth routine. Not sure what else i could be doing better to increase this.

Click to expand...

You need to be relentless with this, your girth will later grow as well. It took a while for me, but now I'm filling up the hydromax 5's base (all around) and further up the tube. It's a slow process, but if you are relentless you will get there. Keep at it a month and do the pumping and SSJ's every day. One session every day, and see where you are at then after a month. This is a long game.

just as long as it is normal to only see such a small gain in girth after a session then i’m okay with that. Surely ill start seeing a bit more an increase after another 2-3 months?

Cleareyes said:

just as long as it is normal to only see such a all gain in girth after a session then i’m okay with that. Surely ill start seeing a bit more an increase after another 2-3 months?

Click to expand...

I just relate your experience to my my own experience with Bathmate pumps. I think it's a difference in Bathmate pumps (hydro-pumping) and Air-pumps. That's the reson I give you this clear information, that you need to keep at it in a relentless way.

I got practically non expansion when I started to pump with Bathmate. And now the hydromax 5 is almost to small (girthwise).