Issue with the pip

D

Dapper Dan

0
Registered
Joined
May 14, 2012
Messages
272
Hello
Maybe someone has experienced a similar issue and can help me out
I've had the bath mate Hercules since October, it's been working fine and dandy, up until a couple months ago
When I try to pump now, all the water just shoots out of the valve, and there is no suction at all. It is incredibly frustrating. Before I would get a good grip and it would work no problem. Now I get nothing
To reiterate, when I pump down, water just shoots out of the front and there is absolutely zero pressure whatsoever. I think it is a problem with the pip (black stick at the top)
I took it apart and put it together a few times, made absolutely no difference
Is there any way to fix this? Anybody had a similar experience? Thanks
 
Dapper Dan;695116 said:
Hello
Maybe someone has experienced a similar issue and can help me out
I've had the bath mate Hercules since October, it's been working fine and dandy, up until a couple months ago
When I try to pump now, all the water just shoots out of the valve, and there is no suction at all. It is incredibly frustrating. Before I would get a good grip and it would work no problem. Now I get nothing
To reiterate, when I pump down, water just shoots out of the front and there is absolutely zero pressure whatsoever. I think it is a problem with the pip (black stick at the top)
I took it apart and put it together a few times, made absolutely no difference
Is there any way to fix this? Anybody had a similar experience? Thanks
Click to expand...

Yes, send a private message to Bathmate_Craig or Bathmate_Chris and request a new valve, they will send it right out. If you have any problems let me know and I will handle it for you. Everything on MOS is covered by an iron clad warranty, that is why it is safe to buy from the Brotherhood.
 
Hey so just an update
Bathmate was working great for a couple weeks
Today it stopped working again
I do my sessions standing up in the shower
I was sitting on my bed playing with be pump to see why was wrong with it. I would stick it on my leg while sitting down, pump facing outward. It will stick. Perfect pressure. If I stand up, it won't stick at all. No pressure. I don't have a bathtub so I can't do my sessions laying down. That would be the quick fix. What do I do? I need a fat cock. Lol. Can't live without it
So basically to reiterate. It works facing upward, but not parallel to the floor (standing up) what gives??

- - - Updated - - -

Sorry for confusing sentence structure. I'm drunk
 
I was considering buying a penomet, they have a slightly different valve system which interests me. But their customer service seems to be bollocks. Which is not appealing to me at all
I don't wanna wait a month for it to MAYBE arrive. Read of them getting lost in the mail smh
 
Dapper Dan;696085 said:
Hey so just an update
Bathmate was working great for a couple weeks
Today it stopped working again
I do my sessions standing up in the shower
I was sitting on my bed playing with be pump to see why was wrong with it. I would stick it on my leg while sitting down, pump facing outward. It will stick. Perfect pressure. If I stand up, it won't stick at all. No pressure. I don't have a bathtub so I can't do my sessions laying down. That would be the quick fix. What do I do? I need a fat cock. Lol. Can't live without it
So basically to reiterate. It works facing upward, but not parallel to the floor (standing up) what gives??

- - - Updated - - -

Sorry for confusing sentence structure. I'm drunk
Click to expand...

The PIP can be a bit 'fiddly' but you can try and manually pull it out as you're pumping and pushing it back, (it'll only move very slightly) and see if that helps. For a permanent 'fix' and increased suction power, you can get rid of the BM valve entirely and replace it with the VacuVin mod...game changer for me, btw
 
Big Schwanz Acht;696104 said:
The PIP can be a bit 'fiddly' but you can try and manually pull it out as you're pumping and pushing it back, (it'll only move very slightly) and see if that helps. For a permanent 'fix' and increased suction power, you can get rid of the BM valve entirely and replace it with the VacuVin mod...game changer for me, btw
Click to expand...

The best advice, it changes the whole pumping game. The Wine Vac Modification
 
True. Thanks for the advice. Gonna look into that
I'm getting really annoyed with bath mate working only half the time
I bought another bath mate back in March when the one I'm using started giving me issues. With THIS one. Literally ten second after pumping down, tons of air bubbles come from the top and it loses its auction immediately. I can not put into words how annoying this is.I see red!!

The wine vac works on the Hercules?

Does the "vacu vin wine saver" get the job done?
 
Last edited:
Dapper Dan;696231 said:
Sick. Gonna buy one asap
It fits on easily?
Click to expand...

Like it's made for it! I use a rubber 'o' ring/washer for a compression fit to keep the VV stopper in-place while filling, (the light pressure of the water entering the cylinder upside-down will dislodge it otherwise
 
Dapper Dan;696235 said:
Cool!
Stupid question, but where do I get a rubber O ring? Thanks
Click to expand...

unscrew the faucet in your bathroom...one will be there :) You can also use a rubber band...whatever is handy that will provide some compression and 'give' while you're wedging the VV stopper in place of the BM valve
 
Cool. Thanks for your help man
Will it work without the ring? In case I don't wanna take apart my faucet? Lol

Also. I have another bath mate Hercules that I bought, and with this this one. Literally five second after pumping, to da of air bubbles come in from the top. And it loses pressure completely. Wtf is up with that?
 
So I bought a vv wine saver
I'm using the rubber stopper in place of the Valve and that's it right?
I'm gonna try it out later hope it works
 
Also dld. I tried emailing bathmate_craig or Chris but neither email was found

My message was going to be:
Hi. A while ago I started having an issue with the valve/pip on my bath mate
I have two bath mates now actually. And both of em have separate problems
On the first one: when I pump down, the pip goes outward, expels water, but does not return to its original position. So basically water shoots out and there is no pressure at all. This started happening a couple months ago. Sometimes it works fine, most of the time it does not. It is very frustrating
I bought a second bath mate after this. In hopes of resolving the issue
With the second one: when I pump down I get a decent seal, the pip does its job. However, after 5 seconds, a ridiculous amount of air bubbles comes in from the valve. And that's it. Seals gone. I believe that is a problem with the valve itself
Thanks
 
Dapper Dan;696298 said:
Also dld. I tried emailing bathmate_craig or Chris but neither email was found

My message was going to be:
Hi. A while ago I started having an issue with the valve/pip on my bath mate
I have two bath mates now actually. And both of em have separate problems
On the first one: when I pump down, the pip goes outward, expels water, but does not return to its original position. So basically water shoots out and there is no pressure at all. This started happening a couple months ago. Sometimes it works fine, most of the time it does not. It is very frustrating
I bought a second bath mate after this. In hopes of resolving the issue
With the second one: when I pump down I get a decent seal, the pip does its job. However, after 5 seconds, a ridiculous amount of air bubbles comes in from the valve. And that's it. Seals gone. I believe that is a problem with the valve itself
Thanks
Click to expand...

I believe it's a hyphen vs. an 'underscore' for their email...plus, once you have the VV mod, you'll laugh and never bother w/the BM valve ever again. BTW, I have a couple 'lightly' used BM valves that you or anyone can have
 
So, I just did a session with the vv. Don't know how I feel about it yet
It was strange having water shoot out of the base as opposed to the top lol
Pressure was good, didn't really feel as apparent as with the regular valve, but when I pulled as if to take it off, there was a fair amount of resistance. Also very easy to get to max pressure. Literally happens within first pump
My dick is fatigued right now. I'll see in the morning whether it's a good fatigue or not so good
Was definitely good to get a session in cause the past couple days I wasn't able to
 
Let your body get used to the additional suction slowly...it's really easy to over-pump w/the VV. Also, the gaiter should be fully compressed against your pelvis, that's when you know you're at the max that the stock BM could reach...it is at this point where the VV can take you beyond what you can physically take.
 
The VV is no fucking joke
My cock is literally fatter than its ever been
I was banging this girl earlier her pussy was literally squeezing the fuck out of my dick
I wrapped my hand around my cock and couldn't believe it
Felt thicker than its ever been
Damn
 
You must log in or register to reply here.

Similar threads

S
x20 x30
2
Replies
27
Views
2K
DLD
DLD
DLD
U
Bathmate on low pleasure - Red spots and dark skin
Replies
11
Views
2K
DLD
DLD
DLD
NIK1
Bathmate Routine For after 5 Months
Replies
19
Views
2K
DLD
DLD
DLD
I
Having problems with my x30 .. HELP!
2 3
Replies
44
Views
3K
H
huge-girth
H
M
Which model to get?
Replies
18
Views
1K
DLD
DLD
DLD
Back
Top Bottom