Pumping breaking town tissue, micro tears? And how can you tell mm hg?

[tbean750]

I just used a $55 sex shop air pump I have for twenty min, first time using unused water most of the time about half way to abit over half some of that time. I'm confused because it goes way to to -19 and -15 fast as shit and the average pump I always do is right about where this thing says about -17 but from youtubesnive watched I really hope it's not the same as mmhg because everyone says don't exceed six or don't exceed ten well my dick doesn't even move up until it's on -8ish like that's it just being sucked in a bit. There's two numbers on my gauge in posting pictures can someone PLEASE tell me which one is mmhg? Maybe the red numbers under the ones I've been looking at??
Next question again not relating to the above, well on YouTube some doctors say penis pumping does create micro tears to create muscle growth and I see a lot of people say it doesn't but I just pumped and my penis is about .3-.35in longer and thicker I don't know how much but a lot and people say length gains don't really come from pumping, i know this isn't a gain right now but over time wouldn't this lead to that? And why would people say all this is pumping is working out the penis, INCLUDING length wise creating the micro tears is it not doing this? Thank you MUCH for any answers

 

[oldandlively]

let's break down a few statement and explanation.

I just used a $55 sex shop air pump I have for twenty min, first time using unused water most of the time about half way to abit over half some of that time. I'm confused because it goes way to to -19 and -15 fast as shit and the average pump I always do is right about where this thing says about -17 but from youtubesnive watched

First of all, that is an air pump ONLY. The moment you use water, the waterwill cause the gauge and valve body to go crazy. It will cause erratic values on the gauge. Disassemble the pump and dry everything up in the pump body. The MityVac and similar system have a water reservoir to capture the water from entering the hand pump, preventing the issues you have where the pressure went up to 15inHg and 19inHg.

I really hope it's not the same as mmhg because everyone says don't exceed six or don't exceed ten well my dick doesn't even move up until it's on -8ish like that's it just being sucked in a bit. There's two numbers on my gauge in posting pictures can someone PLEASE tell me which one is mmhg? Maybe the red numbers under the ones I've been looking at??

The gauge is in inHg, not mmHg. If your penis was under the pressure between 15 and 19inHg, you would probably injured yourself along the way, or even got a nice blister. Unless you have the conditioned penis, or a penis of a Hulk, most penis can't handle past 10inHg without getting a massive blister.

When we start out, our internal pressure is maxed out around 5.5inHg. We slowly condition our penis up to take on the pressure as we go up. We slowly go up. We don't jump from 5.5inHg to 8inHg within a few weeks. It takes a couple of months. The magic grow zone is around 10inHg to 13inHg. However, that requires many months of preconditioning your penile skin first, especially your glans.

Next question again not relating to the above, well on YouTube some doctors say penis pumping does create micro tears to create muscle growth and I see a lot of people say it doesn't but I just pumped and my penis is about .3-.35in longer and thicker

What causes the micro tears is when your skin expands past 125% of its size on average. For some, it requires to go past 150%. So, if your penis is 5in in circumference, at 125%, that's an expansion to 6.25in to get the micro tears. at 150%, that's 7.5in of expansion to get the micro tears. This is why we do manual stretches under the SRT before we pump. When we pump, we also use the 5x5x3 approach to increase internal pressure to push the tunica skin layers so we can stress it both using internal force using SSJ and the pump. Think of a wall being pushed and pulled by two group of people to make it move both inside and outside, rather than just having one group of people doing just the pulling.

I don't know how much but a lot and people say length gains don't really come from pumping, i know this isn't a gain right now but over time wouldn't this lead to that? And why would people say all this is pumping is working out the penis, INCLUDING length wise creating the micro tears is it not doing this? Thank you MUCH for any answers

Pumping doesn't not give you length. It will give you girth. Always keep that in mind. If you chasing after girth, pumping is the key. Unless you know how to use a tight body cylinder for length, that's a different story. By using a small tight cylinder, you're forcing your tunica to stretch rather than expand. This is an advanced pumping method that veterans don't talk about and just give you summary of what they've done.

If your penis's girth is 5in, you're using a uniform cylinder the size around 5.15in in circumference. As your penis is filled in the cylinder when it expands, the only remaining direction it up and out. This is tunica elongation pumping for length.

If your penis's girth is 5in, and you use a cylinder that this 5.5in or even 6in, you're expanding your penis and not lengthening it. The length is caused by the negative pressure pulling the penis out, but the length gain is very minimal. Maximum gains is round 10%, while the average gain is around 3% to 5%.

 

[DLD]

I just used a $55 sex shop air pump I have for twenty min, first time using unused water most of the time about half way to abit over half some of that time. I'm confused because it goes way to to -19 and -15 fast as shit and the average pump I always do is right about where this thing says about -17 but from youtubesnive watched I really hope it's not the same as mmhg because everyone says don't exceed six or don't exceed ten well my dick doesn't even move up until it's on -8ish like that's it just being sucked in a bit. There's two numbers on my gauge in posting pictures can someone PLEASE tell me which one is mmhg? Maybe the red numbers under the ones I've been looking at??
Next question again not relating to the above, well on YouTube some doctors say penis pumping does create micro tears to create muscle growth and I see a lot of people say it doesn't but I just pumped and my penis is about .3-.35in longer and thicker I don't know how much but a lot and people say length gains don't really come from pumping, i know this isn't a gain right now but over time wouldn't this lead to that? And why would people say all this is pumping is working out the penis, INCLUDING length wise creating the micro tears is it not doing this? Thank you MUCH for any answers

Definitely red numbers. The issue is the actual gage is cheap and may not be giving you the right numbers. You may be able to find a high quality gage you can modify yourself. Cheaper pumps almost always give the wrong numbers.

 

[tbean750]

I usually don't use enough water to reach the gauge, if it gets within an inch or two of the very top I usually spill some out. But I know if I can't get length gains doing this I won't invest in a real water pump. I just like shorter duration length workouts stretching is nice but can't do it everyday for hours if I'm busy so I might try weights in the near future those days just 20-40minnin the shower for length gains

 

[tbean750]

Definitely red numbers. The issue is the actual gage is cheap and may not be giving you the right numbers. You may be able to find a high quality gage you can modify yourself. Cheaper pumps almost always give the wrong numbers.

Ty, ya it seemed to go up a lot faster than my last $70-85 pump called jacked up, which broke the handle fell apart fully because I soaked it in the truck b for two seconds to clean it off

 

[DLD]

I usually don't use enough water to reach the gauge, if it gets within an inch or two of the very top I usually spill some out. But I know if I can't get length gains doing this I won't invest in a real water pump. I just like shorter duration length workouts stretching is nice but can't do it everyday for hours if I'm busy so I might try weights in the near future those days just 20-40minnin the shower for length gains

I highly recommend the MityVac. Excellent build with an extremely on point gage. This will cost more than the pump you have but it will give you completely accurate readings. It also gives you the ability to pump wet and dry. It also comes with a lifetime warranty.

If you are looking for both length and girth I highly recommend the SRT routine as this will give you both length and girth at record speed. The only thing you need is a LengthMaster and a good pump. You can use this routine for life, if you hit a plateau you simply need to add exercises or intensity.

Read through SRT to get your head around what SRT is. If you have questions please just ask them and we will guide you through the process.

 

[tbean750]

let's break down a few statement and explanation.



First of all, that is an air pump ONLY. The moment you use water, the waterwill cause the gauge and valve body to go crazy. It will cause erratic values on the gauge. Disassemble the pump and dry everything up in the pump body. The MityVac and similar system have a water reservoir to capture the water from entering the hand pump, preventing the issues you have where the pressure went up to 15inHg and 19inHg.



The gauge is in inHg, not mmHg. If your penis was under the pressure between 15 and 19inHg, you would probably injured yourself along the way, or even got a nice blister. Unless you have the conditioned penis, or a penis of a Hulk, most penis can't handle past 10inHg without getting a massive blister.

When we start out, our internal pressure is maxed out around 5.5inHg. We slowly condition our penis up to take on the pressure as we go up. We slowly go up. We don't jump from 5.5inHg to 8inHg within a few weeks. It takes a couple of months. The magic grow zone is around 10inHg to 13inHg. However, that requires many months of preconditioning your penile skin first, especially your glans.



What causes the micro tears is when your skin expands past 125% of its size on average. For some, it requires to go past 150%. So, if your penis is 5in in circumference, at 125%, that's an expansion to 6.25in to get the micro tears. at 150%, that's 7.5in of expansion to get the micro tears. This is why we do manual stretches under the SRT before we pump. When we pump, we also use the 5x5x3 approach to increase internal pressure to push the tunica skin layers so we can stress it both using internal force using SSJ and the pump. Think of a wall being pushed and pulled by two group of people to make it move both inside and outside, rather than just having one group of people doing just the pulling.



Pumping doesn't not give you length. It will give you girth. Always keep that in mind. If you chasing after girth, pumping is the key. Unless you know how to use a tight body cylinder for length, that's a different story. By using a small tight cylinder, you're forcing your tunica to stretch rather than expand. This is an advanced pumping method that veterans don't talk about and just give you summary of what they've done.

If your penis's girth is 5in, you're using a uniform cylinder the size around 5.15in in circumference. As your penis is filled in the cylinder when it expands, the only remaining direction it up and out. This is tunica elongation pumping for length.

If your penis's girth is 5in, and you use a cylinder that this 5.5in or even 6in, you're expanding your penis and not lengthening it. The length is caused by the negative pressure pulling the penis out, but the length gain is very minimal. Maximum gains is round 10%, while the average gain is around 3% to 5%.

 

[tbean750]

TYVM! SO you can use a more narrow pump, go past 125% normal penis length, and over time it can cause real length gains?

 

[tbean750]

let's break down a few statement and explanation.



First of all, that is an air pump ONLY. The moment you use water, the waterwill cause the gauge and valve body to go crazy. It will cause erratic values on the gauge. Disassemble the pump and dry everything up in the pump body. The MityVac and similar system have a water reservoir to capture the water from entering the hand pump, preventing the issues you have where the pressure went up to 15inHg and 19inHg.



The gauge is in inHg, not mmHg. If your penis was under the pressure between 15 and 19inHg, you would probably injured yourself along the way, or even got a nice blister. Unless you have the conditioned penis, or a penis of a Hulk, most penis can't handle past 10inHg without getting a massive blister.

When we start out, our internal pressure is maxed out around 5.5inHg. We slowly condition our penis up to take on the pressure as we go up. We slowly go up. We don't jump from 5.5inHg to 8inHg within a few weeks. It takes a couple of months. The magic grow zone is around 10inHg to 13inHg. However, that requires many months of preconditioning your penile skin first, especially your glans.



What causes the micro tears is when your skin expands past 125% of its size on average. For some, it requires to go past 150%. So, if your penis is 5in in circumference, at 125%, that's an expansion to 6.25in to get the micro tears. at 150%, that's 7.5in of expansion to get the micro tears. This is why we do manual stretches under the SRT before we pump. When we pump, we also use the 5x5x3 approach to increase internal pressure to push the tunica skin layers so we can stress it both using internal force using SSJ and the pump. Think of a wall being pushed and pulled by two group of people to make it move both inside and outside, rather than just having one group of people doing just the pulling.



Pumping doesn't not give you length. It will give you girth. Always keep that in mind. If you chasing after girth, pumping is the key. Unless you know how to use a tight body cylinder for length, that's a different story. By using a small tight cylinder, you're forcing your tunica to stretch rather than expand. This is an advanced pumping method that veterans don't talk about and just give you summary of what they've done.

If your penis's girth is 5in, you're using a uniform cylinder the size around 5.15in in circumference. As your penis is filled in the cylinder when it expands, the only remaining direction it up and out. This is tunica elongation pumping for length.

If your penis's girth is 5in, and you use a cylinder that this 5.5in or even 6in, you're expanding your penis and not lengthening it. The length is caused by the negative pressure pulling the penis out, but the length gain is very minimal. Maximum gains is round 10%, while the average gain is around 3% to 5%.

Hey, do you know how wide normal penis pumps are? I'm looking on Amazon for "narrow penis pumps" for just length workouts, does 1.5 or 1.75in wide sound like the right range?

 

[oldandlively]

TYVM! SO you can use a more narrow pump, go past 125% normal penis length, and over time it can cause real length gains?

Correct. This is how length is worked on using pumping method. It's not as effective as the length devices, such as the Length Master.

 

[oldandlively]

Hey, do you know how wide normal penis pumps are? I'm looking on Amazon for "narrow penis pumps" for just length workouts, does 1.5 or 1.75in wide sound like the right range?

The cylinders come in all sizes, commonly 0.25in increment at a time. Each region is different so it's hard to tell. This is where a little research comes into play on your part. If it's hard for find the cylinder sizes in your area, let us know. We'll try to switch searching method.

 

[DLD]

Correct. This is how length is worked on using pumping method. It's not as effective as the length devices, such as the Length Master.

Exactly a thin tube with cause length to grow. This compression keeps girth at bay but at the same time bringing length. A smart thing to do but the LengthMaster does so much more in bringing length growth.