NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger

NIK1 said:
Thanks for all the tips..I have been Hanging since Oct last yr and was at 10 lbs with a VacHanger3 before my SiliStretcher arrived..Its a Vacuum hanger so I am used to the weight and Vacuum..I was doing 1 hr straight with the VH3 and I was getting swelling at the glans especially the tip probably due to the straight 1 hr hang..Tomorrow I will start 3 /20 min hangs with 3 to 5 min breaks in between to return circulation like DLD mentioned..One hr hangs were no problem before with the VH3,the swelling started on the glans doing 1hr straight when the weight level reached 8 lbs and up..Under 8 lbs there was No Swelling at all..Just thought to mention that FYI.
Click to expand...


Thank you for taking my advice you’re going to definitely see a difference. Please after your first session come back and let us know how things are going. If there’s any other issues will deal with them as they arise. But I think you’re gonna be very happy with this new method.
 
I'm a current VacHanger3 user and am interested in buying this. Will you for sure be coming out with an extender portion? How much extra would that cost? I prefer that vs ADS because it is easier to track and increase the stretch.

Also, when I went to the store the silistretcher was priced at $149 and there was a discount code that popped up too. Within the couple minutes I registered here to ask a question, it now shows $200 and no discount code.
 
Krow said:
I'm a current VacHanger3 user and am interested in buying this. Will you for sure be coming out with an extender portion? How much extra would that cost? I prefer that vs ADS because it is easier to track and increase the stretch.

Also, when I went to the store the silistretcher was priced at $149 and there was a discount code that popped up too. Within the couple minutes I registered here to ask a question, it now shows $200 and no discount code.
Click to expand...

The traction add on will be $99 and will be available in April if not sooner. There is also an in-line micro digital scale add-on coming in April that tracks tension up to 55lbs.

The first few weeks the silistretcher was set at an introductory price which was suppose to end Sunday night.

The discount codes currently do not apply to the silistretcher unless you purchase a group of mos tools.
 
Lightning said:
The traction add on will be $99 and will be available in April if not sooner. There is also an in-line micro digital scale add-on coming in April that tracks tension up to 55lbs.

The first few weeks the silistretcher was set at an introductory price which was suppose to end Sunday night.

The discount codes currently do not apply to the silistretcher unless you purchase a group of mos tools.
Click to expand...

Ugh...I waited too long and just got the money over the weekend to buy it at the intro price. Lesson learned.
 
Last edited:
We will extend the discount for another few days for active members of MOS. Please PM me for the code. This offer only applies if you are a registered member of our forums
 
Last edited:
DLD said:
Thank you for taking my advice you’re going to definitely see a difference. Please after your first session come back and let us know how things are going. If there’s any other issues will deal with them as they arise. But I think you’re gonna be very happy with this new method.
Click to expand...
Well it looks like hanging with 10 lbs for 20 min sets with 3-4 min in-between sets is working better than expected..I now get No Puffiness or Swelling at all on the Glans anywhere doing 20 min sets..Looks like this Routine is a Keeper indeed...Just wondering would there be any benefit in wearing a SiliRing when Hanging..Or is this not a good thing to do..Just Curious..
 
Happy to hear you are loving the SiliStretcher. \o/

The beauty of the SiliStretcher is that we ship two lengths of the SiliSleevs with it. The longer SiliSleeves will distribute tension across your entire shaft for more comfort and focus on extracting more internal penis while stretching the entire penis. In turn, this will be much more comfortable to wear for longer periods.

The shorter SiliSleevs focus more tension towards the upper end of your penis. This is great for stretching tissue. DependIng on your sensitivity, you may feel a bit more tension or pulling sensation focused in that area.

You can roll the longer SiliSleevs up if they are too long for you but they also can be cut as well. If you decide to cut them, make sure it's a clean cut so it doesn't compromise the integrity of the SiliSleev.

You are hanging a pretty good amount of weight already, I would definitely wear a SiliCap regardless of tension.
 
So whats the science behind using a scrotum stretcher with a hanger and calling it a girth band? I want to hear this one.
 
This is the product description on LG Hanger website about their Girth Bands..The girth bands functions in a couple different ways. When using your LG Hanger to hang weight, it helps keep your flaccid penis fuller during the hang without compromising circulation. It is also used after your hang session to help prevent retraction or as the PE community calls it “turtling”. It allows your penis to stay fuller and longer while flaccid, which is very important during the recovery process after you hang sessions. It can and should be worn during the day and during the night while sleeping. As your penis grows the girth band helps to train your penis to remain at it’s fullest size while flaccid.
 
NIK1 said:
This is the product description on LG Hanger website about their Girth Bands..The girth bands functions in a couple different ways. When using your LG Hanger to hang weight, it helps keep your flaccid penis fuller during the hang without compromising circulation. It is also used after your hang session to help prevent retraction or as the PE community calls it “turtling”. It allows your penis to stay fuller and longer while flaccid, which is very important during the recovery process after you hang sessions. It can and should be worn during the day and during the night while sleeping. As your penis grows the girth band helps to train your penis to remain at it’s fullest size while flaccid.
Click to expand...
They're also used as a wrap replacement for clamping. I would never pay for those though. I just use a two-inch length of sleeve and fold it in half.

By the way, no one should ever wear these at night when they sleep. That's a terrible idea.
 
So its basically used as a wide cock ring. It's pointless for hanging if you're not pumping or jelqing as well. and I definitely wouldn't sleep with it.

Honestly, I wouldn't recommend sleeping with anything on because you have no way of monitoring what is happening when you are sleeping. Especially if you are a heavy sleeper. There are too many noobs out there that don't know what they are doing.

The SiliStretcher and SiliSleevs are stealth enough to wear all day out and about, no need to sleep in them as well.
 
Lightning said:
The traction add on will be $99 and will be available in April if not sooner. There is also an in-line micro digital scale add-on coming in April that tracks tension up to 55lbs.

The first few weeks the silistretcher was set at an introductory price which was suppose to end Sunday night.

The discount codes currently do not apply to the silistretcher unless you purchase a group of mos tools.
Click to expand...


A perfect package I put together for SRT that could include a discount would be a package deal on:

The SizeDoctor or SiliStretcher
The MityVac
The Lengthmaster
SiliRing

This would be the perfect package where we can give a discount and they can get all their tools they need for SRT.
 
BCquest said:
Already started reading up on this. Looks intense. :)
Click to expand...

That’s awesome if you have any questions or need anything cleared up please just let me know I am here to help. Some people get confused with some of the parts of SRT but it really is very simple when I understood correctly. There’s no faster way to gain so I’m happy you’re looking into it.
 
Haursen said:
Is there a time friendly version of SRT? I may start SRT once my SS comes...just concerned about the time investment.
Click to expand...

Yes I can write a shorter version for you. How much time can you invest in this routine? And what are your immediate goals for this routine? Let me know as soon as you get your SiliStretcher and we can put this into effect.In the meantime let me know your time restraints and I’ll start working on your SRT routine.
 
bluetard117 said:
Just ordered mine, many thanks to Lightning!
Click to expand...

Awesome, you're gonna love it, so simple but yet so effective. We just tested upward stretching with the included ADS belt and it's fucking incredible! The ADS stretching options are so brilliant.

Allot of Phallosan users are switching over to SiliStretcher due to the fact of how simple and durable it is by incorporating the best sleeves in the world and the first ever ADS/Hanger fool-proof piston vacuum system. Plus more stretching angles, hanging option and weights out the box, super comfortable, no blistering, no fluid retention issues, and stealth options .

Once we have the inline digital micro scale its gonna take the SiliStretcher to the next level to monitor true tension/weight by grams and lbs..
 
Last edited:
Haursen said:
Just PM @Lightning and he will help. :)
Click to expand...
I tried PMing Lightning yesterday to get the discount code but didn’t get a response. Would like to test and review this as soon as I get it.

I’m eager to find a long term ADS solution, as it is a crtitical part of SRT method. Can’t use Phallosen at work- the only stealth option for me is a good knee strap solution like Silistretcher (hopefully). It seems easy to remove and put back on after peeing, which is what I need in order to realistically use it every day at work, especially since I do morning bathmate pumps before work. I’ve had limited results, especially length wise, and suspect it’s due to not having a viable ADS I can use at work every day. Silistretcher seems to have the magic combination of ease of use, stealth, and comfort. Very excited to try.
 
Guys, I just want to add something in here.

Many people are excited to get the Silistretcher and start hanging 50lbs the first day, It don't work like that.

We include a certain weight set for you to start with and work your way up so you don't hurt yourself. If you strap this on and think you're going to slap 50lbs on it and wake up with a 12" dick tomorrow, it's not going to happen. We've been here for 16 years doing this and some of us even longer and trust me, it don't work like that.

You have to gradually work your way up, just like anything in life. Stretching tissue/ligs and healing takes time and patience. I am a firm believer that light weight and tension over longer periods yields much better long term permanent results. What's the rush anyway?

Take your time, understand the process and realize what you are doing to you body are permanent results and it should be done correctly.
 
Last edited:
To maximize sessions with the SiliStretchers and SiliSleevs, follow this simple guide below.


Make sure your entire penis is shaved clean of hairs
Hairs will create loss of suction with SiliSleev and the SiliStretcher.

Make sure your penis is clean, dry and free of oil
If you put lotion on your skin, this will cause loss of grip. Your skin also has a natural oil that can cause loss of grip. You want to maximize grip. We strongly recommend cleaning and drying your penis then using MOSGrip to remove all the natural oils of your skin and create a tack for maximum grip. Sweat causes slippage as well, MOSgrip also helps eliminate sweat under the SIliSleev.

Make sure your SiliSleevs are clean, dried and powdered with MOSGrip
Dirty oily SiliSleevs with pubic hairs in them will cause loss of suction/vacuum/grip. You want to clean your SiliSleevs before each use

Make sure you do not have a pin hole in your SiliSleev from excessive use
Pinholes are easiest to find if you blow up the SiliSleev with a little air from your mouth. Don't blow them up In a big balloon.


Follow these simple steps and you will maximize your stretching sessions with the SIliStretcher and maximize the life of the SiliSleevs.
 
Last edited:
I got my silistretcher a couple of days ago, fast shipping!

I tried it briefly yesterday for 30 minutes and this thing is really comfortable.

I’m uncut and it took just a bit of pulling skin back, but not bad.

One question, is the piston supposed to come off?
I twisted too many times and piston came out, no issue as I put it back on and twisted the other way and it went back on.
I figured it was for cleaning purposes.

The pull is great nothing like it.

I own an x4 extender and there is no comparison in how comfortable the silistretcher is.
 
JustGrow said:
I got my silistretcher a couple of days ago, fast shipping!

I tried it briefly yesterday for 30 minutes and this thing is really comfortable.

I’m uncut and it took just a bit of pulling skin back, but not bad.

One question, is the piston supposed to come off?
I twisted too many times and piston came out, no issue as I put it back on and twisted the other way and it went back on.
I figured it was for cleaning purposes.

The pull is great nothing like it.

I own an x4 extender and there is no comparison in how comfortable the silistretcher is.
Click to expand...


Awesome, yes it is truly one of a kind!

The piston purposely comes out for lubing maintenance. There is food grade grease on piston rings to ease the piston motion and maintain years of use. It is the same exact concept as an engine piston with piston rings and compression. Technology thats been around for centuries but we incorporated it into PE :)
 
JustGrow said:
I got my silistretcher a couple of days ago, fast shipping!

I tried it briefly yesterday for 30 minutes and this thing is really comfortable.

I’m uncut and it took just a bit of pulling skin back, but not bad.

One question, is the piston supposed to come off?
I twisted too many times and piston came out, no issue as I put it back on and twisted the other way and it went back on.
I figured it was for cleaning purposes.

The pull is great nothing like it.

I own an x4 extender and there is no comparison in how comfortable the silistretcher is.
Click to expand...
Can’t wait to try mine too. A comfortable ADS makes it easier to use consistently, which leads to more effective PE. I also have traction devices like the X4 and Penismaster. Both are effective while in use but uncomfortable for me to wear as a long term ADS, which is a key component to SRT. And extenders also lack stealth for public use.

Phallosen is probably the most comfortable of them all as an ADS but still lacks the necessary stealth for use at work for me because it only straps to the waiste and at my workplace its too obvious with tucked in clothes.

I also tried LG Hangers leg strap ADS and it doesn’t have vacuum capability so it was very hard to keep on and also not that comfortable. Probably the least comfortable ADS of all I’ve tried.

I’ve even tried Amazon golf weights as an ADS and that was mildly comfortable at times, but it’s pretty conspicuous and bulky and pinching often occurs. And it lacks ease of use because it takes quite an effort to take off and on quickly enough for a pee. My coworker, whose desk is near the office restroom, once asked me why I took so long to pee?....so not a good workplace ADS.

So been looking long and hard ? for a quality ADS that pulls as close to the base of the penis as possible, in order to hold the pull I get from pumping....which I finally figured out how to pull the base really good while pumping. The SiliSleeves doubled to the base should provide that capability comfortably, much like vacuum hanging ala LG Hanger. Instead of pulling just from the glans or mid shaft, the double sleeve should allow more of an evenly distributed pull along the shaft, providing added comfort.

But the self containing component to Silistretcher just puts this ADS in its own category, for both comfort and ease of use. The overalll construction seems to have huge advantages over other forms of ADS.
 
CGA said:
Can’t wait to try mine too. A comfortable ADS makes it easier to use consistently, which leads to more effective PE. I also have traction devices like the X4 and Penismaster. Both are effective while in use but uncomfortable for me to wear as a long term ADS, which is a key component to SRT. And extenders also lack stealth for public use.

Phallosen is probably the most comfortable of them all as an ADS but still lacks the necessary stealth for use at work for me because it only straps to the waiste and at my workplace its too obvious with tucked in clothes.

I also tried LG Hangers leg strap ADS and it doesn’t have vacuum capability so it was very hard to keep on and also not that comfortable. Probably the least comfortable ADS of all I’ve tried.

I’ve even tried Amazon golf weights as an ADS and that was mildly comfortable at times, but it’s pretty conspicuous and bulky and pinching often occurs. And it lacks ease of use because it takes quite an effort to take off and on quickly enough for a pee. My coworker, whose desk is near the office restroom, once asked me why I took so long to pee?....so not a good workplace ADS.

So been looking long and hard ? for a quality ADS that pulls as close to the base of the penis as possible, in order to hold the pull I get from pumping....which I finally figured out how to pull the base really good while pumping. The SiliSleeves doubled to the base should provide that capability comfortably, much like vacuum hanging ala LG Hanger. Instead of pulling just from the glans or mid shaft, the double sleeve should allow more of an evenly distributed pull along the shaft, providing added comfort.

But the self containing component to Silistretcher just puts this ADS in its own category, for both comfort and ease of use. The overalll construction seems to have huge advantages over other forms of ADS.
Click to expand...

I can assure you that the SiliStretcher will play a huge part in the SRT it’s already taken the place of the Phallosan. The new SRT routine includes all of our own gear we make ourselves. Everything custom engineered for SRT!

I am putting together a special package for SRT at a deep discount that will include

The Lengthmaster
The SiliStretcher or SizeDoctor
The Mityvac
and all supplies

This will help people get all the gear they need to do the full SRT routine while saving a lot of money.
 
CGA said:
Can’t wait to try mine too. A comfortable ADS makes it easier to use consistently, which leads to more effective PE. I also have traction devices like the X4 and Penismaster. Both are effective while in use but uncomfortable for me to wear as a long term ADS, which is a key component to SRT. And extenders also lack stealth for public use.

Phallosen is probably the most comfortable of them all as an ADS but still lacks the necessary stealth for use at work for me because it only straps to the waiste and at my workplace its too obvious with tucked in clothes.

I also tried LG Hangers leg strap ADS and it doesn’t have vacuum capability so it was very hard to keep on and also not that comfortable. Probably the least comfortable ADS of all I’ve tried.

I’ve even tried Amazon golf weights as an ADS and that was mildly comfortable at times, but it’s pretty conspicuous and bulky and pinching often occurs. And it lacks ease of use because it takes quite an effort to take off and on quickly enough for a pee. My coworker, whose desk is near the office restroom, once asked me why I took so long to pee?....so not a good workplace ADS.

So been looking long and hard ? for a quality ADS that pulls as close to the base of the penis as possible, in order to hold the pull I get from pumping....which I finally figured out how to pull the base really good while pumping. The SiliSleeves doubled to the base should provide that capability comfortably, much like vacuum hanging ala LG Hanger. Instead of pulling just from the glans or mid shaft, the double sleeve should allow more of an evenly distributed pull along the shaft, providing added comfort.

But the self containing component to Silistretcher just puts this ADS in its own category, for both comfort and ease of use. The overalll construction seems to have huge advantages over other forms of ADS.
Click to expand...

There will probably never be a perfect solution if you wear tight pants and tucked in shirts at work besides the SiliSleevs or the smallest version SiliStretcher. A certain size penis requires a certain size ADS to be effective.

However, we have a fake penis sleeve that slides over the SiliStretcher vacuum knob to give you the appearance of having a good size cock as you are growing a good size cock (Win/Win).

We will be getting pictures of it up shortly.
 
Lightning said:
There will probably never be a perfect solution if you wear tight pants and tucked in shirts at work besides the SiliSleevs or the smallest version SiliStretcher. A certain size penis requires a certain size ADS to be effective.

However, we have a fake penis sleeve that slides over the SiliStretcher vacuum knob to give you the appearance of having a good size cock as you are growing a good size cock (Win/Win).

We will be getting pictures of it up shortly.
Click to expand...
This is great, so will these sleeves be sent out if we already have the silistretcher or do we have to request them?
 
You must log in or register to reply here.
Back
Top