Modified Fastsize

[Steady]

So I've been playing around with my Fast Size [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. BTW, they aren't selling right now -

Fastsize is currently not accepting new orders from customers. Fastsize LLC is currently working on acquiring medical clearance to sell the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] as a classified medical device. Until this process is complete we are not able to sell devices.

Anyway, I found it to be a pain in the ass putting the end piece on and then having to stretch my unit out to get it onto the rods. After a little bit of thinking I wondered why the tubes where the metal shaft goes has to be so long. That's what was a pain. By the time I stretched out and pulled the end piece onto the rods it would then move back about an inch and a half until the rods contacted the front.

I figured I didn't need this length of 'tube' so I pulled out the Dremel and cut about half the tube off. What a difference it made. I was able to get the thing on no problem and didn't have to run the rods out so much with the adjustment screws.

I'll try to post some pics when I get a chance.

 

[kast]

yes, please post the pics when you can, i would be very interested in this hack.

 

[Steady]

Sorry about the blurry pictures. I had to turn the flash off and it ends up with a messed up focusing. But I think they're clear enough to see what I did.

I get a much better stretch with this modification. I have no idea why they make those so deep. There's no structural need for it.

View attachment 22568View attachment 22569

 

[kast]

WOW that is a freaking great idea! another reason why I need a fucking dremel!

thanks!

 

[8iG]

awesome idea, im probably gonna try that, too.. if i manage to cut it..

 

[kast]

The number 1 reason I tend to skip the FS session is just having to put the device on, it can be a bitch, and sometimes takes a few goes before i get it on perfect. This will help a lot.

 

[Steady]

I just used my dremel with the small cutting disk. It cut right through without melting it. Took about 2 minutes.

From the first time I used the FastSize I wondered why they had to make that rod holder so deep. I mean, you actually lose an inch and a half of stretch when you put it on.

I know their website shows setting the whole thing up then tightening down on the shaft, but I found that to be way too ineffective. I watched a video here, I think it was stillwantmore, and he showed putting the end piece on first and tightening it down on the shaft, then putting that onto the rods. I guess when they made the fast size they didn't account for someone putting it on that way.

IMO it is much more effective now because I only lose about 3/4" of stretch getting the rods situated. Now I can run the adjustments out without running out of threads. And I got a much stronger stretch from the device.

I probably could have cut out even more but I wanted to try it out with half of the length cut off. If it's satisfactory this way I'll just leave it.

You could use a hacksaw or coping saw (or something similar). You could definitely get access to the cuts with any saw because there is nothing obstructing a straight cut.

 

[Steady]

I was also thinking about this. I wonder if you could use something similar to 'Chinese finger cuffs' to actually grab the penis and hold it. I think it would work better than anything else because it increases the surface area of gripping. I think it would also not have to clamp down as hard therefore creating less of a pinching off of the blood supply.

That's an experiment for a different day.

 

[kast]

I think I have read something about that idea somewhere, cant remember what the negative on the idea was, but I do remember there was a negative i will have to find that post.

 

[Steady]

One negative I can think of is it has to grab the head. If it's just on the shaft it'll just grab skin and pull it along until it hits the glans. Probably not a good idea. The glans will also keep compressing if it's only on the glans... thinking about it now makes it seem like a lousy idea..... lol

 

[Steady]

I just oredered the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. The comfort strap is what did it for me. I am planning on using an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] every day and the rubber noose is just not going to do it for me. Way too much numbness in the glans.

 

[magiksock]

Very clever. I'm going to end up doing this. I will end up being able to add another medium sized rod with this modification. Thanks a bunch for the pics. The guys in this community are great.

 

[DLD]

Very clever. I'm going to end up doing this. I will end up being able to add another medium sized rod with this modification. Thanks a bunch for the pics. The guys in this community are great.

The Comfort Strap is great but in my mind I know they can make something better. I would love to be a test subject for their developers, I know I could come up with something superior.

 

[Steady]

I hear you DLD. My mind is always churning to solve some problem or another. When I started using the FastSize I saw a few things that could be better. One of those is the modification I did. The other, obviously is the noose. I pulled if off last night and my glans was cold and so numb I couldn't feel it. Took a little while to get it back to norm. The sad thing is I was checking it as I sat there watching TV but I still missed it going that numb.

I would guess the comfort strap is better than the tube noose and that's why I bought the Genetics. Hopefully I won't be disappointed.

magiksock - No problem. It felt really good to be able to actually give some value back to this community. And yeah, the people are terrific here.

 

[8iG]

.
sorry,just ignore

 

[Steady]

I guess I never explained exactly why I did this. When you have to stretch your penis to max to get the rods in, with the default setup you lose approx. 1" of stretch in order to have the bars contact the front. Now you have to run the tension bars out 1" just to get to the point where you were stretched to in order to get the stretcher on. If the strap or noose moved forward at all during your session, you would have to extend it even more.

I found I was running out of adjustment before hitting the tension I wanted. So with the modification, I am only losing 1/2" of length. In this way I have kept 1/2" of adjustment in the bars which make it much easier to get to full extension and still have more adjustment room. It also puts less potential for damage because the smaller threaded rods are not extended as much and makes it harder to bend them at all.

 

[magiksock]

The Comfort Strap is great but in my mind I know they can make something better. I would love to be a test subject for their developers, I know I could come up with something superior.

I never saw your reply...
I agree. The comfort strap is reasonable, but its not that comfortable. I wish they would make a strap that spreads out wider and has a greater surface area to distribute the pressure.


Steady, I ended up dremeling my Fastsize like you did. It is a very worthwhile modification. Thanks again.

 

[kast]

I guess I never explained exactly why I did this. When you have to stretch your penis to max to get the rods in, with the default setup you lose approx. 1" of stretch in order to have the bars contact the front. Now you have to run the tension bars out 1" just to get to the point where you were stretched to in order to get the stretcher on. If the strap or noose moved forward at all during your session, you would have to extend it even more.

I found I was running out of adjustment before hitting the tension I wanted. So with the modification, I am only losing 1/2" of length. In this way I have kept 1/2" of adjustment in the bars which make it much easier to get to full extension and still have more adjustment room. It also puts less potential for damage because the smaller threaded rods are not extended as much and makes it harder to bend them at all.

Bought myself a dremel tool and did the same, I did notice it introduces some instability to the unit.

 

[DLD]

Someone will get it perfect one of these days. It is only a matter of time when someone comes out with an ultimately, universally comfortable strap.

 

[Steady]

Bought myself a dremel tool and did the same, I did notice it introduces some instability to the unit.

How much of it did you cut off? I cut about half the length off on my FastSize, and even went more on my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words]. I haven't noticed any instability at all. You might get a small amount of more 'play' in the bars because it's not surrounded by more tube on the front piece, but nothing that I find a problem at all.

 

[mano22]

awesome

 

[bilimiyao420]

Exercises and the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] devices should be used carefully.

 

[REDslim]

Does the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size genetics[/words] comfort strap and plastic piece that holds the comfort strap fit on the fast size [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. If so i will just buy the spare parts for my FS

 

[huge-girth]

The number 1 reason I tend to skip the FS session is just having to put the device on, it can be a bitch, and sometimes takes a few goes before i get it on perfect. This will help a lot.

Both the length master and the SiliStretcher are both easy to put on. You will even forget that you have the SiliStretcher on at some point.