If I have sent you a silicone sleeve to test, Please post your review.

B

bandit2010

Guest
If I have sent you a silicone sleeve to test, please post your review below and what you think.
 
I think the materials and workmanship are great, my issue stems from not being able to get it on w/out ripping. When you make a few with more width, I'll try again.
Thx
 
Big Schwanz Acht;753542 said:
I think the materials and workmanship are great, my issue stems from not being able to get it on w/out ripping. When you make a few with more width, I'll try again.
Thx

yeah I know, I am in the process of r and d for a bigger mold to make a 1 inch id sleeve, as well as getting more silicone.
 
if you could, please take some pictures when you do, as I do not have a decent camera anymore thanks to the cat.
 
Good to see you are continuing to work on this. I pray we can get it perfect!
 
yeah there is a few people I sent sleeves to that have not replied.
 
I am going to post a review this weekend i wanted to get pictures and to write it up properly, just wanted you to know i didn't forget lol
 
Lookn4girth;753712 said:
I have not received mine yet bandit. Did you get the MO I sent

yeah I got it Monday , I have got to get your sleeve in the mail tomorrow or Friday.
 
I can not stress this enough, I need the people I have sent sleeves to, to post what they think, so I will know what to do, as I am getting ready for the next step in things,
 
Thank you again Bandit for taking the time to make these sleeves!

The goal I had in mind while testing these out is to see where i could apply it in a routine. I had tested it as a pump sleeve to try and reduce fluid retention during use of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], as well as testing it as a replacement/addition with the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap for the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]Length master[/words] and lastly as a replacement for the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap if your using it as a method to prevent turtleing.

My first impression of the 6" sleeve was that the materiel was smooth a tad tacky and flexible, it was able to roll up completely for easy application. I was comparing it to a second sleeve i have had for about a year so that i could give a good comparison.

I have used it with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]bathmate[/words] a couple of times, the soft flexibility of the sleeve provided some great padding, if your having an issue with gator bite or just not enough girth to fill the negative space of the tube (as i feel i do) this helps immensely as it stretches with you really well and adds that extra little bit. I have used it to try and reduce or remove fluid retention from happening alas the soft flexibility of the 00-20 silicon offered too little resistance to prevent it much it did add a little force to reduce to overall level, the other tube i have i think is 00-30 silicone which if it was not partitioned into 2" sections would work perfectly for this.

I haven't had as much time to test it with the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]length master[/words] as i would have liked too, what i have found is that because of the slight tac to it the sleeve creates a great grip on the skin. Because of the grip it hold tight combined with a wrap to keep it firmly in place it provides the perfect amount of padding making the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]length master[/words] a far easier device to use. I still have much i would like to test with this including hanging.

I intend to edit and add to this review as i have more that can help. With the picture you have the white tube that is Bandit's creation and the blue lg hanger tube


View attachment 33721View attachment 33720
 
Sinthious;753897 said:
I have used it with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]bathmate[/words] a couple of times, the soft flexibility of the sleeve provided some great padding, if your having an issue with gator bite or just not enough girth to fill the negative space of the tube (as i feel i do) this helps immensely as it stretches with you really well and adds that extra little bit. I have used it to try and reduce or remove fluid retention from happening alas the soft flexibility of the 00-20 silicon offered too little resistance to prevent it much it did add a little force to reduce to overall level, the other tube i have i think is 00-30 silicone which if it was not partitioned into 2" sections would work perfectly for this.

This was what I had in mind when I first saw that Bandit was willing to make them...would a more 'resistant' silicon help?
 
Big Schwanz Acht;753926 said:
This was what I had in mind when I first saw that Bandit was willing to make them...would a more 'resistant' silicon help?

I actually chatted with Bandit on the phone last week talking about that we also talked about how the air bubbles from the silicon not being degassed could have compromised the sketchiness or just not big enough for your massive size, imo yes going to the 00-30 silicon (the one with more resistance) from the current 00-20 will likely reduced the fluid retention why i say this is because the Lg Hanger sleeve i have i think is the 00-30 and it does reduce the fluid retention to the point where i don't get edema near the circ scar but with it being cut into 2" sections i get areas around the where it meets that do swell up so one solid tube is needed. There has to be a hand off though as just like fr reducing gains too much resistance from the silicone tube will as well.

I had mentioned to Bandit that we should find someone who could 3d print the mold, particularly the center rod so that there is no shifting (one wall tend to be minutely thinner which could compromise strength) Does anyone here have access to one?
 
Last edited:
Sinthious;753928 said:
I actually chatted with Bandit on the phone last week talking about that we also talked about how the air bubbles from the silicon not being degassed could have compromised the sketchiness or just not big enough for your massive size, imo yes going to the 00-30 silicon (the one with more resistance) from the current 00-20 will likely reduced the fluid retention why i say this is because the Lg Hanger sleeve i have i think is the 00-30 and it does reduce the fluid retention to the point where i don't get edema near the circ scar but with it being cut into 2" sections i get areas around the where it meets that do swell up so one solid tube is needed. There has to be a hand off though as just like fr reducing gains too much resistance from the silicone tube will as well.

I had mentioned to Bandit that we should find someone who could 3d print the mold, particularly the center rod so that there is no shifting (one wall tend to be minutely thinner which could compromise strength) Does anyone here have access to one?

this is something I am looking into, I honestly don't think it would compromise it that much.
 
bandit2010;753929 said:
this is something I am looking into, I honestly don't think it would compromise it that much.

Oh no yeah the bubbles were not the major cause i agree that it just needs to be a bit bigger for Acht,
Thank you for your hard work Bandit we all appreciate the knowledge that we gain through this project.
 
So happy things are continuing and improving! Great work Brothers!
 
I received my sleeve that Bandit made and had me test and I can report that it has been an excellent product. The initial impression after opening the package was that the product looked very well made. The sleeve was very smooth and I did not notice any defects in the sleeve. I took the sleeve and cleaned it and dried it before placing some powder on it. My wife had some powder that she uses on her silicone toys and it works really well for anything made from silicone. The sleeve is very soft and stretchy. I used it with my [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] in place of the condom sleeve that is supplied with it and it is hands down better than the condom sleeves. It was very comfortable and did not slip at all. After removing my PF I used the sleeve as a anti turtle sleeve and once again, it worked great in this area as well. The sleeve is 5.5" and I can see where I could use one approx. 3" for the PF but it still worked flawlessly. I did not experience any issues with rolling the sleeve up with the PF or putting it on for anti turtle.

I will continue to use the sleeve to see how well it holds up to daily use but I see no reason why it would not continue to perform as it has so far.
 
Lookn4girth;754336 said:
I received my sleeve that Bandit made and had me test and I can report that it has been an excellent product. The initial impression after opening the package was that the product looked very well made. The sleeve was very smooth and I did not notice any defects in the sleeve. I took the sleeve and cleaned it and dried it before placing some powder on it. My wife had some powder that she uses on her silicone toys and it works really well for anything made from silicone. The sleeve is very soft and stretchy. I used it with my [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] in place of the condom sleeve that is supplied with it and it is hands down better than the condom sleeves. It was very comfortable and did not slip at all. After removing my PF I used the sleeve as a anti turtle sleeve and once again, it worked great in this area as well. The sleeve is 5.5" and I can see where I could use one approx. 3" for the PF but it still worked flawlessly. I did not experience any issues with rolling the sleeve up with the PF or putting it on for anti turtle.

I will continue to use the sleeve to see how well it holds up to daily use but I see no reason why it would not continue to perform as it has so far.

Excellent review, sounds like things are almost ready to go!
 
Lookn4girth;754399 said:
I think Bandit may have found the answer to what we have been looking for. I used the sleeve again today and just as before, it worked great.

So for the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]phallosan[/words] you think cutting it and sizing it down is a good idea
 
Lookn4girth;754399 said:
I think Bandit may have found the answer to what we have been looking for. I used the sleeve again today and just as before, it worked great.

Good to hear. Lets wait on the others and we will start to sell.
 
Back
Top