DSD Progress log

Yesterday I tried mityvac water pump and it worked well. Today, my EQ just wasn't good enough until I ran into water trap being too small to continue pumping. Why did they make it so small? I can't even properly release the pressure with the pump gun when its so full.
The reason why the water trap is small is because the larger the trap, the more expensive it is. Think about the lab quality water trap at 1 liter size, shooting up past $50. 2 liters size goes high in to $70 and $80. That costs brings the system way up. Smaller 4oz or 6oz trap keeps the system economical, and still provide the sufficient 18inHg support.
 
Liter? I'm not asking for a liter lol. It's just plastic. You can find plastic containers for few bucks. The top with the O-ring is the only detailed part. I'm barely getting to 5Hg with the trap and the tube filled with water.

Next time I'm going to use my bathmate first with either 2 gentle pumps or 1 moderate. I seemed to be more charged up after bathmate. I'll be more likely to get into mityvac and start pumping before I lose significant EQ %. I need 3 arms for mityvac. I want to see if I can install a small cupholder in shower to hold the water trap upright and above the tube.
 
Liter? I'm not asking for a liter lol. It's just plastic. You can find plastic containers for few bucks. The top with the O-ring is the only detailed part. I'm barely getting to 5Hg with the trap and the tube filled with water.

Next time I'm going to use my bathmate first with either 2 gentle pumps or 1 moderate. I seemed to be more charged up after bathmate. I'll be more likely to get into mityvac and start pumping before I lose significant EQ %. I need 3 arms for mityvac. I want to see if I can install a small cupholder in shower to hold the water trap upright and above the tube.
This is why SIM and I are working on a larger water trap for cheaper upgrade. Most are still between 3 and 7inHg. But as we go higher, stronger containers are needed. The smaller container that came with the unit support higher pressure, but lower capacity. SIM modded his with larger volume, but lower pressure less than 12inHg.

As for 3 arms needing, no need. You can strap the water trap onto the trigger pump or the cylinder itself, reducing one less hand needed. However, you may need to upgrade the length of the 1/4in tube. Just something to think about.
 
Yesterday I tried mityvac water pump and it worked well. Today, my EQ just wasn't good enough until I ran into water trap being too small to continue pumping. Why did they make it so small? I can't even properly release the pressure with the pump gun when its so full.
I was having this issue of trap filling to fast a dvrunning up to bvb the gun when I first started a month ago, but not so much now.

Just a personal thing I found is to make sure I am as hard as can be, then fill the cylinder to full with hot water from the sink. Then I step into my shower and fit the cylinder on and let the excess water overflow until I get it pressed solid seal against my fat pad.

The cylinder is completely full of water with no air to bleed off. Seems like when I first started, having some air in the cylinder to start meant I had to pump for awhile trying to get pressure up. Could never get out all the air but pumped a lot more water out to get pressure around 6-8.

Now, I start getting pressure from first squeeze and can go up to 10 with only filling the trap about 3/4 full.

I also found keeping trap above cylinder outlet and level makes it fill less and less risk of tipping the trap at an angle that let's water flow up the tube to the pump gun. I use my bathroom sink and faucet with tubing wrapped around it and trap hanging level in the sink, standing in front of the sink. I like to look at the bathroom mirror to check progress all around so setting up this way adds to the fun!

I still think a bigger trap is needed but not because I'm filling the trap currently. I have found when releasing pressure after going up in pressure for a minute I introduce air back in to the cylinder.

I am thinking through a design of my own that would let the water from cylinder pump to the bottom of the trap so I could start with my tube to the cylinder full of water to start, and then when going down in pressure instead of pulling air back into the cylinder it would pull back in water.
 
I am using the mitysleeve still but I might try without. That makes it take a little extra time to get inserted in tube. I know that today I wasn't having great luck at keeping erection full before getting a vacuum. I'll have to try attaching trap to tube somehow.

5/23
Today was first attempt at water pumping without showering same time.

warmup
heatpad
bundled stretches 4 x 2-3mins
directional jelqs 5-10mins
SSJ 5 mins - tried using cloth to assist grip. mixed results
mityvac water pump - first was OK, 2nd was rather meh. Messed around a bit trying different things...
Finally went to bathmate and got 2 good pumps in.
More solid SSJ at desk. Really good expansion with just hand.
cockring 1+hrs
redlight

expansion: MSEG 6.125 so I am increasing again.

Thoughts: Need to work on mityvac a bit. Penis is feeling a bit.. lumpy tbh. Like it's not uniform across length of shaft. When I slide hand along under and topside, there's feels like 2 bowings. Not really lumps. Nothing hard. Just 2 crests that feel different than I remember. And my bend downward seems more than before. Trying to be observant of changes and things feel different.

I also think my turkey neck (PENOSCROTAL WEB) is getting worse. I'm not happy with how it looks right now. Really making me reconsider whether I am doing the right thing. I always got compliments for having a nice looking penis, not even just how big it is. I need to be thinking about if there is anything to make these things better. There is so much skin there and I've been stretching it thinking it'd just hang more.
 
Last edited:
Yesterday I tried mityvac water pump and it worked well. Today, my EQ just wasn't good enough until I ran into water trap being too small to continue pumping. Why did they make it so small? I can't even properly release the pressure with the pump gun when its so full.
Just make a bigger one. It will be a game changer for you.
 
This is why SIM and I are working on a larger water trap for cheaper upgrade. Most are still between 3 and 7inHg. But as we go higher, stronger containers are needed. The smaller container that came with the unit support higher pressure, but lower capacity. SIM modded his with larger volume, but lower pressure less than 12inHg.

As for 3 arms needing, no need. You can strap the water trap onto the trigger pump or the cylinder itself, reducing one less hand needed. However, you may need to upgrade the length of the 1/4in tube. Just something to think about.
It will be a great day when you and Sim perfect this. We will brand it and add to store
 
5/24/24

Kind of a wasted session..

Trying to water pump with mityvac and EQ wasn't good. Water trap full before I got full expansion.
1 decent pump with bathmate
A few good SSJ

Overall, EQ wasn't good. Felt like I was relying on vibrator too much. I end up spending far too much time trying to essentially force the work. I suspect that this was because it was my 5th day pumping in a row plus I did leg day. I hadn't worked out in a week.

Going to try the following schedule:

Workout MWFSa
PE TuThSaSu

I think that's a good balance. 4 days on for both should give me good gains. It's hard to do PE and workout on same day. Just don't have the same energy. Except for Saturday. I think I can do the PE earlier in day then workout in afternoon.

I might do some PE stuff on my offdays, just nothing strenuous.

Noting that I am questioning whether bundled stretches make turkey neck worse? It seems like the skin around base is really getting stretched a lot.
 
How do ball and lig stretches help the turkey neck or penoscrotal webbing? There's a lot of extra skin in the area under base of penis connecting with scrotum. If I am warmed and hanging, if I pulled flaccid penis away from body, there is this webbing of skin that connects to the underside of shaft going out quite a ways.
 
How do ball and lig stretches help the turkey neck or penoscrotal webbing? There's a lot of extra skin in the area under base of penis connecting with scrotum. If I am warmed and hanging, if I pulled flaccid penis away from body, there is this webbing of skin that connects to the underside of shaft going out quite a ways.
You stretch the skin towards your scrotum. This is one key element to gain length fast. This skin going up the shaft, is one major reason for doing Ball&Lig Stretches.

You will be able reduce it, especially if you do them simultaneously as you gain a couple of inches of penile length.

Look through these videos carefully and see how I use my hands to target the skin and stretch it towards my scrotum. I'm in video 1, 2, 3 and @DLD is in video 4.

[GALLERY=album, 114][/GALLERY]
 
Thanks, but I'm trying to understand what the exercise does. Especially since I'm not trying to gain length. It seems like I'm stretching the skin that I want to reduce. I could imagine gaining in girth would help a little.
 
Thanks, but I'm trying to understand what the exercise does. Especially since I'm not trying to gain length. It seems like I'm stretching the skin that I want to reduce. I could imagine gaining in girth would help a little.
You stretch the skin towards your scrotum, it will elongate and more away from your shaft.
 
You stretch the skin towards your scrotum. This is one key element to gain length fast. This skin going up the shaft, is one major reason for doing Ball&Lig Stretches.

You will be able reduce it, especially if you do them simultaneously as you gain a couple of inches of penile length.

Look through these videos carefully and see how I use my hands to target the skin and stretch it towards my scrotum. I'm in video 1, 2, 3 and @DLD is in video 4.

[GALLERY=album, 114][/GALLERY]

The best exercise for a longer flaccid penis
 
5/25/24

light/off day
10 mins ball & lig stretches
5 mins basic downward jelqs

non-PE
used fleshlight with suction cup shower mount. Gotta stay in practice lol.
 
Back
Top