Equipment modification My small modification

squirt_inducer_man · Jun 18, 2023

BFL said:
Yours def looks rigid!
Wish I had more time available to use it.
Was thinking of adding a large washer under each knob on mine to spread out the load more.

Yes it's extremely rigid.

Try to find something that covers both wing-nuts, like my broomstick, but more slimmer. This will help you distrubute the force downward, and prevent the upper part of the chamber to tilt forward as much.

I have sand down the upper part and the bottom part of the short broomstick that sits on top of the chamber, to make these sides flat. This allows it to prevent the tilting forward that's happening when you clamp down.

It will also prevent the upper part of the chamber to flex so much, and your clamp down will be more secure and harder.

The clamp down point will be more in the inner tissue of the penis and more near/in the base, and more in your inner penis.

Have you seen that there are 2 more holes in the chamber?

I have an idea of rasing the chamber from the Power Assist 2 and in this way you can use all 4 holes when you clamp down. But I believe this is to much. The risk of making everything to unstable is there. 🙂

DLD · Jun 18, 2023

Very very cool

squirt_inducer_man · Jun 18, 2023

Maybe a LengthMaster - Penis Bundle Stretcher & Weight Hanging with 2 handles?
Correction: 4 handles.

DLD · Jun 18, 2023

squirt_inducer_man said:
Maybe a LENGTHMASTER with 2 handles?
Correction: 4 handles.

Interesting idea considering the first lengthmaster had one arm

squirt_inducer_man · Jun 18, 2023

DLD said:
Interesting idea considering the first lengthmaster had one arm

That was interesting information.

I'm brainstorming.

DLD · Jun 18, 2023

squirt_inducer_man said:
That was interesting information.

I'm brainstorming.

I know you are! Thanks from the bottom of my heart

squirt_inducer_man · Jun 18, 2023

DLD said:
I know you are! Thanks from the bottom of my heart

You're welcome.

squirt_inducer_man · Jun 19, 2023

This may be a solution to make it better, for behind the cheeks stretches. I'm just spitting out ideas right now. Or you could just create bigger handels, like I did with my attached broomstick at the back of my LengthMaster 3 - Penis Bundle Stretcher & Weight Hanging.

In the picure I have made a sketch of a lenghtmaster with 3 diffrent grip points for each hand. I'm thinking that the grip 2 needs to be big enough to fit most hands, and also the distance between the upper 1 grip and the under 3 grip needs to be big enough so you fit with your hands, on all the diffrent grip points/handles.

My idea is to make the grip as natural as possible. I'm thinking that you could alternate between the 1-3 points of grips depending on what stretch you are performing.

I hold my stretches behind the cheeks at 5 minutes each to get maximum elongation of the tissue. So maybe this design can work to make it easier on the wrists? I have no problem with this, but maybe some brothers have problem holding their wrists in a FLEXION and EXTENSION position for a long time.

I believe we are stronger in a more natural hand position. So grip number 2 in the first picture would be to promote a more natural hand/wrist position, and make it easier to stretch in BTC stretches (Behind the ASS).

But I must say, that love the current LENGTHMASTER 3, it's awesome.

But now when you are talking about a new version, I thought I could put my brain to work and help coming up with idea's.
Maybe there is a way to make it even more powerful? I don't know?, but it's just fun to think about improvements.

My ideas are mostly overkilled so maybe most of it isn't practical to put into a comercial product.

I hope this helps you in some way @DLD.
I'm doing this because I'm loving this brotherhood, and I want every single brother that join to gain as fast as possible. You need to tell me to stop, otherwise I will continue this brainstorming that I'm stuck in right now.

Kind regards.

DLD · Jun 19, 2023

squirt_inducer_man said:
This may be a solution to make it better, for behind the cheeks stretches. I'm just spitting out ideas right now. Or you could just create bigger handels, like I did with my attached broomstick at the back of my LENGTHMASTER 3.

View attachment 1833288
In the picure I have made a sketch of a lenghtmaster with 3 diffrent grip points for each hand. I'm thinking that the grip 2 needs to be big enough to fit most hands, and also the distance between the upper 1 grip and the under 3 grip needs to be big enough so you fit with your hands, on all the diffrent grip points/handles.

My idea is to make the grip as natural as possible. I'm thinking that you could alternate between the 1-3 points of grips depending on what stretch you are performing.

I hold my stretches behind the cheeks at 5 minutes each to get maximum elongation of the tissue. So maybe this design can work to make it easier on the wrists? I have no problem with this, but maybe some brothers have problem holding their wrists in a FLEXION and EXTENSION position for a long time.

View attachment 1833289
I believe we are stronger in a more natural hand position. So grip number 2 in the first picture would be to promote a more natural hand/wrist position, and make it easier to stretch in BTC stretches (Behind the ASS).

But I must say, that love the current LENGTHMASTER 3, it's awesome.

But now when you are talking about a new version, I thought I could put my brain to work and help coming up with idea's.
Maybe there is a way to make it even more powerful? I don't know?, but it's just fun to think about improvements.

My ideas are mostly overkilled so maybe most of it isn't practical to put into a comercial product.

I hope this helps you in some way @DLD.
I'm doing this because I'm loving this brotherhood, and I want every single brother that join to gain as fast as possible. You need to tell me to stop, otherwise I will continue this brainstorming that I'm stuck in right now.

Kind regards.

This is incredible 👏 keep up the good work. I will keep sending these to MOS

squirt_inducer_man · Jun 19, 2023

DLD said:
This is incredible 👏 keep up the good work. I will keep sending these to MOS

Awesomeness.

squirt_inducer_man · Jun 19, 2023

I believe it's important to have some kind of grip at the front as well, so you can easily rotate your penis, for example in your warm-up (rotating your penis from side to side).

DLD · Jun 19, 2023

Nice. Can you sketch a side view?

squirt_inducer_man · Jun 19, 2023

DLD said:
Nice. Can you sketch a side view?

Will look at that later. But don't know if this is a viable solution. But I will try. I tried to put my arms at grip 2 in my picure on the LENGTHMASTER 3. But my arms where to short to get any levarage in BTC stretch. I will brainstorm.

squirt_inducer_man · Jun 20, 2023

But I will make a side view as well. I believe this (2) grip (see post #28) can be helpful for other kind of stretches. I wish I had Solidworks, and a better computer.

squirt_inducer_man · Jun 20, 2023

DLD said:
Nice. Can you sketch a side view?

squirt_inducer_man said:
Will look at that later. But don't know if this is a viable solution. But I will try. I tried to put my arms at grip 2 in my picure on the LENGTHMASTER 3. But my arms where to short to get any levarage in BTC stretch. I will brainstorm.

squirt_inducer_man said:
But I will make a side view as well. I believe this (2) grip (see post #28) can be helpful for other kind of stretches. I wish I had Solidworks, and a better computer.

Here is another version of the side view:

"Click" on picures to see them in full view.

DLD · Jun 20, 2023

Makes sense. I was thinking about another idea. I will sketch it and PM you

squirt_inducer_man · Jun 20, 2023

DLD said:
Makes sense. I was thinking about another idea. I will sketch it and PM you

Okey interesting.

Equipment modification My small modification

squirt_inducer_man

(SIM)

DLD

doublelongdaddy

squirt_inducer_man

(SIM)

DLD

doublelongdaddy

squirt_inducer_man

(SIM)

DLD

doublelongdaddy

squirt_inducer_man

(SIM)

squirt_inducer_man

(SIM)

DLD

doublelongdaddy

squirt_inducer_man

(SIM)

squirt_inducer_man

(SIM)

DLD

doublelongdaddy

squirt_inducer_man

(SIM)

squirt_inducer_man

(SIM)

squirt_inducer_man

(SIM)

DLD

doublelongdaddy

squirt_inducer_man

(SIM)

Similar threads