Got my silistrecher - have questions

trustr1

Active member
Registered
Joined
Sep 8, 2023
Messages
236
Hi
Got my ss today.

1. A Bubble came out on my glans after first use of silistrecher (attached). What am i doing wrong?

Also im not sure what i need to put on my glans before putting it inside the ss and wrapping it? I tried the attached part but not sure if that's correct part. Please advice.

Any videos for how using the belts? And leg/knee belts?

Also the gel blue foam for using inside the vaccum was included only for the medium size and not for small size which will be used for the nearest future. So im gonna need that as well.
 

Attachments

  • 20240414_170006.jpg
    20240414_170006.jpg
    545.5 KB · Views: 21
  • 20240414_165135.jpg
    20240414_165135.jpg
    1.1 MB · Views: 14
Ah, the infamous high pressure bubble. Looks like you added a tad too high of a pressure (3 full 4 twists rather than 1 to 2) and you didn't shove enough of the glans in to prevent the gap between your glans and the cap. I made the same mistake with the SS2 at the start as well.

Let's pause, and sort out the parts you use first. Which one are you focusing on?

Vacuum cup
Penis sleeve
Either cap that covers the glans OR the SiliPad2. Not both. Not enough head space for that.

I have photos in my album earlier. I'll be glad to go through this with you. Even a nice post mod too
 
Thank you
Next time i used the blue silicap i think and it seems better.
I guess it takes a while to figure it out
 
Always here to assist you when you need it. There are many hidden tricks to use that ADS using the most efficient ways. I'll provide those methods once you get used to mounting it on.
 
Thank you very much.
I would love to learn.
When i got it and saw all the parts i was kind of lost. Still not sure how to use the belt and everything..
 
By the way is there a recommendation to remove the device each hour or so?
I just used it 3 hours stright and the top of my glans came out really "vaccumed" like. And also skin has pilled so every touch with water even is very sore because the flash is exposed and even with red spot of bit of blood
 
It's up to you base on the comfort level. I can leave it on as long as 8 hours without removing it. I do recommend a 4 hours wear time and allow 15 minutes to breath. Longer hours requires that little mod I talked about and will post soon.

The soreness and pealing is the skin way of adapting to new environment. You had the pressure on just a bit too much. I'll post the tricks for you in the next post.
 
@trustr1 This is my setup and not other brothers. Each and everyone has their own setup. I use this set up during my initial phases using the SiliStetcher2 and discovered an easier time with it, and more efficient method to prevent issues like blisters due to high pressure and long hours in moist environment.

Now, based on your glands size, if you can shove the entire glans in without any issue, where the corona of your glans goes pass the bottom vacuum cup rim, you're in good shape. For me, my glans "barely" makes it in there, so I have to do some creative modding, and the modding came with some benefits.

For me, trimming the SiliPad2 to create that extra 0.15in to work with. Slowly trimming it down create a unique bleeding or weeping hole in the center. You have to be very careful if you're doing this. This allows any moisture and pee, yes, pee, in the urethra to accumulate in the reservoir below the SiliPad2.

SiliPad2Mod01.jpgSiliPad2Mod02.jpg

Adding half a piece of toilet paper at the sealing head of the cup will wick up any moisture you have, and also holds onto small amount of pee droplets. Works great to prevent too much moisture build up and causes the skin to peel during long hours.

SS2_01.jpgSS2_03.jpg

Retract the sealing cap as far back as possible accomodate your glans. Remember, the glans's corona must go pass the cup's rim. Otherwise, you'll regret the pinching pain later.

SS2_02.jpg

If your glans can slide right into the vacuum cup, no worries about anything else. If your glans is slighly larger than the cup, squeeze all the blood out of the glans, and then twist on the cup in a rotational method. You can use a bit of hydrocortizone to lubrican the glans's corona while help it to maintain a water barrier as well. Notice how I fold the bottom of the sleeve at the glans's base upward. Double folding allows triple the grip without using the MOS Grip powder. On days I move around alot, I use the powder as well.

20240405_090450.jpg20240405_091025.jpg

Before twisting the knob to create suction, make sure to have all your glans go pass the bottom rim. See how I keep remind you to do this? Lessons learned. Twist the knob half turn to pull your glans in a bit against the SiliPad2. Bleed the air by lifting up the penis sleeve attached to the vacuum cup. Gently squeeze all the air out as much as possible without accidentally pulling the glans out the vacuum cup or disturb it. Now, give it a good full one turn. You'll get a 3 to 5 inHg of pressure. Just enough to tug the glans completely against the SiliPad2 to prevent blister from forming. At 5 inHg, you're already give your glans a nice cell breakdown for glans expansion. Wearing this for 4 to 10 hours a day, your glans will see a good increase. You indicated the "vacuumed" shape. That means your glans is subjected to pressure that needs to break things down for regrowth. My glans already went 20% larger than original because of the method here.

20240405_091117.jpg

This is a trick I use to prevent further slippage during extreme movement. I use an old slightly larger penis sleeve, do do the same thing as the first one. I have an old cutout penis sleeves to strap at the top of the vacuum cup for the two penis sleeves and the bottom of the base where the sleeves holds onto the base of the glans. The cutout should not be overly tight. This is for me when I move round like crazy, such as running, hiking, and cycling.

SS2_04.jpgSS2_05.jpg

Strappig is simple. The SS2 comes with two straps. Each segment allows you to strap on your leg or around your waist. Only strap downward. You want to tug against your ligaments and tissues. Once you're used to the downward strap, we'll teach you how to use as passive Between the Cheek strapping.

First strap, see how I have the velcro sits on the upper and outside? This is to prevent irritation if the velcro happens to stick out. I also put the elastic clipper for the ADS right at the velcro portion. This is to hold the elastic band to the strap even better. I also strap the second leg strap on top of the elastic band. Why? This will reinforce the strap from coming loose during extreme movement. I can also push the traction force up to 7lbs for the first hour of wearing. This is to prime your tissues for long hours of wearing. It's like a passive LengthMaster - Penis Bundle Stretcher & Weight Hanging workout using the ADS.

Strap01.jpg Strap02.jpgStrapPosition.jpg

Wear your strap over the knee cap. The knee cap uses a lever method to pull on your penis when sitting down. If you're walking all day, you can wear the strap on the inside. If you're walking with it all day using your knee cap as the folcrum/lever method, you'll get an intense dynamic stretching all day. Just make sure not to go overboard as 2.5lbs should be the max stretching tension force for long hours. Going up and down between 2lbs to 7lbs of traction force is fine in a dynamic stretching routine, but it should not exceed more than 4 hours. That's too much on the tissues.

Hope this helps brother.
 

Attachments

  • 20240405_090548.jpg
    20240405_090548.jpg
    1.3 MB · Views: 16
Man. I can't thank you enough For this detailed post.

I was doing it completely wrong. (1. Putting Silicap+silipad. 2. Was pushing the vaccum cap all the way out then put my glans on it while there is 0 room to enter it, then wrap the sleeve down on it and then twist it. Also strip it wrong way).

now i understand much better.
I havn't done reading because im faling asleep but i will read it all multiple times tomorrow and will try it out.

Thank you brother!
 
Ah, the infamous high pressure bubble. Looks like you added a tad too high of a pressure (3 full 4 twists rather than 1 to 2) and you didn't shove enough of the glans in to prevent the gap between your glans and the cap. I made the same mistake with the SS2 at the start as well.

Let's pause, and sort out the parts you use first. Which one are you focusing on?

Vacuum cup
Penis sleeve
Either cap that covers the glans OR the SiliPad2. Not both. Not enough head space for that.

I have photos in my album earlier. I'll be glad to go through this with you. Even a nice post mod too
Agree. Also DO NOT POP IT! Allow it to heal on its own
 
Hi @DLD
I just used it for the 3rd day maybe and the sleeve ripped and have a hole ao i need to throw that. If that would happend every couple of days im gonna need to replace two in a week.

Also the medium size silistrecher is not working since day one. Im trying to twist it but it's twisting on blank. Not going up or down even if i try to give it a push with my other hand.
 

Attachments

  • 20240416_124700.jpg
    20240416_124700.jpg
    820.3 KB · Views: 18
Hi @DLD
I just used it for the 3rd day maybe and the sleeve ripped and have a hole ao i need to throw that. If that would happend every couple of days im gonna need to replace two in a week.

Also the medium size silistrecher is not working since day one. Im trying to twist it but it's twisting on blank. Not going up or down even if i try to give it a push with my other hand.
Do you have sharp nails?

Look here:
View media item 1713
 
Do you have sharp nails?

Look here:
View media item 1713
Don't know if sharp but i will make sure to cut them :)

I saw the video. i push it with my other hand but it's not working.. it feels like it's trying to be screwed onto this "pole" but it slips away every time. Even if i try to press it gently from both sides.
 
Hi @DLD
I just used it for the 3rd day maybe and the sleeve ripped and have a hole ao i need to throw that. If that would happend every couple of days im gonna need to replace two in a week.

Also the medium size silistrecher is not working since day one. Im trying to twist it but it's twisting on blank. Not going up or down even if i try to give it a push with my other hand.
Looks like you have the lack of pressure seal. This is why I fold mine. However, having the proper penis sleeve size is also critical. Measure your flaccid size. This means don't measure after a good erection. Measure it after a few minutes after your penis have time to get most of the blood out and become static in its flaccid state. No more shrinking, no more erection. Now, get the sleeve that is around 3 to 5mm less than the static flaccid size. Don't get one or two. I normally grap in bulk from 5 and up. Sleeves tend to tear.

I also get a sleeve that is 10mm larger than the one you're using. Why? If you're walking around like a maniac, or jogging, doubling up the layers will prevent the slippage as well, and prolonging the stretching of the sleeves and wear them out.

The inner thickness of the sleeve should be betwen 6 to 8mm thick for long lasting.
 
This Is either a defected sleeve or something sharp cut it. You can request a replacement sleeve by emailing to Buymos@gmail.com
 
Hi @oldandlively and others.
I have this issue lately. I'm not sure what im doing wrong.
When i start twisting to get the vaccum the blue silipad back is tight to the back side. I push it with my finger before anything. But after a twist or a bit more i notice a space created in the back.
Im trying to push with my finger through my penis up to the silipad but it's not help mostly and it's also painful.
 

Attachments

  • 20240423_164446.jpg
    20240423_164446.jpg
    1.8 MB · Views: 11
Hi @oldandlively and others.
I have this issue lately. I'm not sure what im doing wrong.
When i start twisting to get the vaccum the blue silipad back is tight to the back side. I push it with my finger before anything. But after a twist or a bit more i notice a space created in the back.
Im trying to push with my finger through my penis up to the silipad but it's not help mostly and it's also painful.
Are you aware of that you do not need to rotate the mechanism for vacuum that much?
 
If you're talking about a small gap between the cap and the sealing cup, it's fine.

The pain you're experiencing (the tip of the glans?) may be due to the high pressure being creating against the blue cup and the glans. How many full rotation of the knob did yu our use? I may have to make a video on this.
 
Back
Top Bottom