Foreballs for FR

koooky · Jul 25, 2005

Hey guys.

I watched the Penn & Teller show and seen the guy from NORM put those
"Foreballs" on and then looked at them on their website thanks to millionman and
I was thinking, "WOW! !30 bucks for two steel balls!!!!" Sounds a bit like a ROP deal to me. SO, I decided to try and make them myself. I just ordered enough stuff to try and make five sets of them. If it works, I may sell a few of them for like 10 bucks a piece plus shipping. I will try to keep everyone posted on this and I will put up a pic when I finish the first one.

kook

millionman · Jul 26, 2005

I don't know about making them, but I know that SUPRA bought the PUD that these folks make and said it was amazing quality. I think the sets come in varies sizes (weight) so maybe that's where some of the extra cost is, but I don't know. I like the idea behind these though, and it seems to be very easy to use and take on and off, since all you need is some tape to keep the thing on.

koooky · Jul 26, 2005

First all, my first post should be, "130 bucks!"

Thats right. If I read it right they are 130 dollars a piece. For two stainless steel balls.
That seems unreal to me and it always seems like people are trying to take advatage of men interested in anything Penis Enlargement by inflating the price on everything. I am sure they have some sort of welding jig that makes putting these together quite simple.

But I agree millionman, I think that they would be a great idea and they look very easy to use. What I am going to try and do is make a centered ball drill jib for my drill press and then use stainless steel harware to link the two balls together. I had to buy a minimum of 5 balls in two sizes. If they come out ok and anyone is interested I will probably sell them for cost plus S&H to anyone who would like one. I am using the 3/4x1.25 inch ball design from the picture you linked to.

kooky

Super · Jul 26, 2005

Get the Pud or CAT II

millionman · Jul 26, 2005

KOOK, let me know how it goes post some pictures when you're done with them and I'll definitely let you know if I can get one.

koooky · Jul 26, 2005

I'll def post some pics of them if they turn out ok million man. I just don't see the need for me to have 5 of the same size and weights and also it may be safe to say that I will have a certain amount of waste if my drill press jig isn't right. Still, I don't see how anyone in their right mind could pay 130 dollars for 2 stainless steel ball bearings. The first size of balls should be in by the end of the week and then the second set should be in by next week. I'll keep you posted.

kook

kong1971 · Jul 27, 2005

I'm interested, too!

MDC · Jul 28, 2005

This has my interest as well. If the price is right, I'll definitely relieve you of one

koooky · Jul 28, 2005

The price will be next to nothing. Mostly cost plus shipping. It will depend on
if I am able to do the machining myself. I am not looking to mass produce these things or make a profit. If this becomes something relatively simple to do, I could put a bunch of them together on the weekends. I just cannot justify 130 dollars for something that seems so inexpensive in material.

kook

9cyclops9 · Jul 28, 2005

Make sure you get the OK from DLD before you actually sell them. Just send him a PM.

koooky · Jul 29, 2005

Well, guys. I don't know if I am going to be able to make a few extras or not. The balls came in from McMasters today and though the smaller size balls(3/4 in) came in a pack of 5, the larger size(1.25 in) came only in a pack of one. So I got 5 small ones and one bigger one. The bigger ones are 10 bucks a piece. I am still going to try and make one, then post a pic, then if anyone wants one I will order the extra balls and still charge close to cost plus shipping.

Kook

kong1971 · Jul 29, 2005

Even $30 to $50 would be far less than the ridiculous prices they charge for foreballs. Besides, I'd much rather have your balls taped to my cock, kook, than some anonymous dude's. I'd just feel more comfortable with that! :D

MDC · Jul 29, 2005

I'm a willing customer for ya.

How are they going to be attached to the rod? Just curious. I may want to have one that's 1.25" x 1.25" too.

koooky · Jul 30, 2005

Wow Kong...that just sounds so wrong. But you are right. 130 for the item is a ridicules price for how cheap the materials are. That is what I was talking about originally. People in the Penis Enlargement/FR business seem so ready to over charge on anything.

Thats a good question MDC.
I have thought to use a drill press and drill through them, then use stainless steel bolt and try it that way. There are some machine shops around here and I had also thought to check first and see what they would charge to weld them. I'm not sure yet since I only have one bigger one and I don't want to screw it up and have to order another one. I think I am going to call around the shops around here this week and see what I can find out.

kook

MDC · Aug 3, 2005

I've been thinking of ways to attach these to your skin and have come up with something that should work very well. If you're familiar with the CAT II, you should be able to use the same silicone nipple to hold the 1.25" ball in place since that's about the same diameter of the "puller" on my CAT II.

sikdogg · Aug 3, 2005

MDC said:
I've been thinking of ways to attach these to your skin and have come up with something that should work very well. If you're familiar with the CAT II, you should be able to use the same silicone nipple to hold the 1.25" ball in place since that's about the same diameter of the "puller" on my CAT II.

Bro, you beat me to the punch... i was just about to post the same idea. You could prolly even buy the silicone nipple from the guy that sells the CAT II.

Foreballs for FR

koooky

Active member

millionman

0

koooky

Active member

Super

Well-known member

millionman

0

koooky

Active member

kong1971

1

MDC

0

koooky

Active member

9cyclops9

Guest

koooky

Active member

kong1971

1

MDC

0

koooky

Active member

MDC

0

sikdogg

1

Similar threads