Girth work What size pump cylinder to order? How to accurately measure your penis for pump cylinder sizing!

[Mullet]

Help with choosing a pump. I’ve had one in the past but likely it was sized wrong. Kept sucking my balls into the cylinder at times, as I have a small sack. Near aerodynamic….. LOL

Thanks to this forum, I can size correctly now, but need assistance in whether to go bathmate or mitivac…. What are the benefits of either? My main goal is girth, but willing to gain both length and girth. THANK YALL!

 

[huge-girth]

Help with choosing a pump. I’ve had one in the past but likely it was sized wrong. Kept sucking my balls into the cylinder at times, as I have a small sack. Near aerodynamic….. LOL

Thanks to this forum, I can size correctly now, but need assistance in whether to go bathmate or mitivac…. What are the benefits of either? My main goal is girth, but willing to gain both length and girth. THANK YALL!

Both pump works. The mityvac is more user friendly than the bathmate. You can use the mityvac for both wet and dry pumping. The mityvac has a gauge so you know the exact pressure you are using.

The bathmate doesn't have a gauge.

I'm using the mityvac.

 

[Mullet]

Both pump works. The mityvac is more user friendly than the bathmate. You can use the mityvac for both wet and dry pumping. The mityvac has a gauge so you know the exact pressure you are using.

The bathmate doesn't have a gauge.

I'm using the mityvac.

Thank you!

 

[Sakuratutte]

Im intrested in buying the mityvac but not sure which size to choose (the diameter), the lenght will be the biggest one. I have seen the sizing tables but im not sure if i should move up one size or not. My base EG is about 6,7 inches but i cant sometimes reach maybe 6,8 inches depending on how i measure. Midshaft my EG is about 6 inches. The table tells me to buy a 2,25 inch diameter.. but maybe this will be to small to early? This equals a diamater of 7,06 inches. It feels like my base cant expand that much with this tube? Should i take the 2,5 inch instead?

Also i would like to ask if there is any avaible discounts at the time? The freight to sweden and swedens poor exchange rate towards dollars is killing me.. over 60 dollars for the freight only

Edit. Im pumping for girth and have about 8,27 inch in BPEL.

 

[oldandlively]

Im intrested in buying the mityvac but not sure which size to choose (the diameter), the lenght will be the biggest one. I have seen the sizing tables but im not sure if i should move up one size or not. My base EG is about 6,7 inches but i cant sometimes reach maybe 6,8 inches depending on how i measure. Midshaft my EG is about 6 inches. The table tells me to buy a 2,25 inch diameter.. but maybe this will be to small to early? This equals a diamater of 7,06 inches. It feels like my base cant expand that much with this tube? Should i take the 2,5 inch instead?

Also i would like to ask if there is any avaible discounts at the time? The freight to sweden and swedens poor exchange rate towards dollars is killing me.. over 60 dollars for the freight only

Edit. Im pumping for girth and have about 8,27 inch in BPEL.

@DLD Mind helping the brother out on the calculation and shipment. It's getting hard for international shipment nowadays.

 

[DLD]

Im intrested in buying the mityvac but not sure which size to choose (the diameter), the lenght will be the biggest one. I have seen the sizing tables but im not sure if i should move up one size or not. My base EG is about 6,7 inches but i cant sometimes reach maybe 6,8 inches depending on how i measure. Midshaft my EG is about 6 inches. The table tells me to buy a 2,25 inch diameter.. but maybe this will be to small to early? This equals a diamater of 7,06 inches. It feels like my base cant expand that much with this tube? Should i take the 2,5 inch instead?

Go for the 2.5 this willl give you more time to grow and include the base of your penis as we always want to give voice to the entire penis.

Also i would like to ask if there is any avaible discounts at the time? The freight to sweden and swedens poor exchange rate towards dollars is killing me.. over 60 dollars for the freight only

Edit. Im pumping for girth and have about 8,27 inch in BPEL.

I believe there is a discount using MOS18. This gives you a 18% off. I am pretty sure it is still available.

 

[Sakuratutte]

Thank you all for your help. I will aim for the bigger diameter then and thanks for the code!
Will see if i can afford to buy the Mityvac straight away or have to wait a little. I had forgotten about the extra VAT sweden also ads.. 25 % extra lol

 

[DLD]

Thank you all for your help. I will aim for the bigger diameter then and thanks for the code!
Will see if i can afford to buy the Mityvac straight away or have to wait a little. I had forgotten about the extra VAT sweden also ads.. 25 % extra lol

Well at least you getting an 18% discount

 

[AimingStraight]

The original post said for girth, using too wide of an opening causes deformed penis’.

Are we talking bending deformities? Or things like I’ve seen where:

The shaft is wide (and round) but the head is small.

The shaft is wide but flat.

The shaft is round but bulbous (like it got stung by a bee) all around.

Thanks.

 

[oldandlively]

The original post said for girth, using too wide of an opening causes deformed penis’.

That's a partial truth. If there are already deformities, they will become more pronounced. As you expand and fill up the cylinder tightly, everything becomes uniform.

Are we talking bending deformities? Or things like I’ve seen where:

The shaft is wide (and round) but the head is small.

The shaft is wide but flat.

The shaft is round but bulbous (like it got stung by a bee) all around.

That applies to all. This is why pumping needs two cylinders to work with. A loose/larger cylinder for a larger expansion, while a cylinder that is slightly larger or snuggy to build uniformity.

 

[DLD]

That's a partial truth. If there are already deformities, they will become more pronounced. As you expand and fill up the cylinder tightly, everything becomes uniform.


That applies to all. This is why pumping needs two cylinders to work with. A loose/larger cylinder for a larger expansion, while a cylinder that is slightly larger or snuggy to build uniformity.

I would also say a tighter tube for length work. It is a very good method.

 

[AimingStraight]

@oldandlively to use both size cylinders; do you have opinions on a ratio? Like a 1 to 1 use. Wide one day, then narrow the next? Suggestions?

Thanks

 

[DLD]

I suggest 1 and 1 is great. Are using one tube for length and the other girth?

 

[AimingStraight]

I suggest 1 and 1 is great. Are using one tube for length and the other girth?

Originally the wider pump for straightening out a small curve. Then I saw girth and length results and was using a wider pump for all three. Then the suggestion came to use both, and you suggested the thinner tube would be better at fixing flaws.

I just bought a thin 12 inch tube. I’m a newbie (apx 5 months) and I’m at a length that might max out the shorter one soon. Still taking it slow per you, @hugegirth, Old and others here.

Thanks!

 

[DLD]

You are welcome! I recommend 1 and 1. Maybe do 2 workouts one for length and another for girth. Go for at least 15 minutes each workout.

 

[oldandlively]

@oldandlively to use both size cylinders; do you have opinions on a ratio? Like a 1 to 1 use. Wide one day, then narrow the next? Suggestions?

As DLD indicated, 1:1 is great for curve control, or curve correction. 1:1.25 is great for girth increase, while maintaining proper curve correction and uniformity. Some brothers here have larger glans, so 1:1.5 is required.

As for the routine, I would say every day is 1:1 routine, while implement 1:1.25 or even 1:1.5 every other day to increase girth right after the 1:1 routines. If there's a strange confusion due to the codes we're using, let us know. We'll expand on the subject for greater clarity.

Still taking it slow per you, @hugegirth, Old and others here.

We're very proud of your patience on this journey. Don't go hard and heavy. Slow and steady until you reach your precondition levels before you go moderate and hard later. You'll see changes along the way. No need to rush.

By the way, any additional manual routines before the pumping?

 

[AimingStraight]

By the way, any additional manual routines before the pumping

Yes. Usually a shower with stretching.

Jelqing and additional stretching opposite the curve after pumping.

 

[oldandlively]

Yes. Usually a shower with stretching.

Jelqing and additional stretching opposite the curve after pumping.

Got it. Once you hit the 6th month mark, manual jelqing and stretching is considered as warmup. Go one step further after that initial 6th month using mechanical assistant. An example is the Length Master, or even a simple broomstick, an all day stretcher (ADS), or even an extender. These devices allow you force the tissues to be broken down faster, with less work, and acting as a precursor routine to to maximize your growth and correction. Penile curvature correction does require growth first, and as growth comes, new cells fix the old curve as the penile shaft lengthen and expand girthwise. But for now, perform your stretches, and every passing week, increase on the intensity on the pull more. Every time you increase intensity, make sure there is no pain whatsoever. Just that achy dull feeling of being stretched.

 

[huge-girth]

What size pump cylinder to order?


Gain Length

​

The rule of thumb is if you are focusing on penis length , order a MityVac pump cylinder in a diameter that is closest to the thickest part of your erect penis girth (see measurements below). The idea is to pack your erect penis in the cylinder and pump so your penis only extends in length since it can't expand much in girth.

Gain Length and Girth
​

Order a MityVac pump cylinder that is .25" larger in diameter than the thickest part of your erect penis girth. This will allow your penis to expand in girth and length at the same time. Ordering a pump cylinder that is much wider than the girth of your penis is not beneficial and will actually cause you to grow a deformed penis over time. So stick with the recommendations we provide, this is all data collected from pump users over the past 20 years.

How to accurately measure your penis for pump cylinder sizing
​

Get a piece of string, thread, wire, etc.

Get your penis erect.

Wrap the string around the thickest part of your ERECT shaft or base (whatever is thickest).

For most people, the thickest part of the penis is at the base of the penis by the pelvic bone. In some cases, some men have a thicker upper shaft. If this is the case, measure the thickest part of your shaft.

Mark where the string where it overlaps itself with a pen so that you can see the pen mark on both ends of the string.

Lay the string on a flat surface and measure the distance between the two pen marks with a ruler.

If your erect girth measurement is:


4” to 4.75” Order a 1.75″ diameter pump cylinder
5″ to 5.75” Order a 2″ diameter pump cylinder
6″ to 6.75” Order a 2.25” diameter pump cylinder
7″ to 7.5” Order a 2.5” diameter pump cylinder
7.75” to 8.25” Order a 2.75” diameter pump cylinder


If your measurement is not listed here – Please Contact Us

NOTE: Be sure to use string to measure circumference. A tailors tape or flexible ruler will not provide accurate measurements.

The MityVac standard cylinder length is 9.25 Inches.

https://shop.mattersofsize.com/collections/penis-pumps-vacuum/products/mityvac-pump-cylinders

https://shop.mattersofsize.com/coll...provac-thick-wall-series-penis-pump-cylinders

https://shop.mattersofsize.com/collections/penis-pumps-vacuum

Wonderful, I've never seen this post before. I've been looking for a for a way to know the exact pump size for every penis size. Glad I finally found it here. I will save the post for future reference.

 

[oldandlively]

I think we need to do an update on RedZulu's instruction as the cylinders have evolved over time. Any brothers with the high knowledge of the MityVac want to tackle this on?