Setting the SiliStretcher for heavier weight and tension

L

Lightning

The Legendary Mistress with the Whips
Staff member
NOTE: This post does not apply to the new SiliStretcher2 with the DuroSleevs. This is only for the SiliStretcher 1 with the original SiliSleevs

We ship the SiliStretcher 1 with the regular size 20mm x 85mm SiliSleev attached and 2.5lbs of weight. This set-up is for starting up and is not intended for heavy weight use. We do this so people don't hurt themselves going overboard the first time using.

Keep in mind, the SiliStretcher is currently intended to be used as an ADS and moderate hanger due to the standard SiliSleevs being the limiting factor.

You will be able to perform intense hanging sessions when the SiliSleev Duros become available.

The current idea is to stretch moderately for long periods, not to hang heavy for short periods.

For advanced users looking to temporarily hang heavier weight and higher tensions with the current standard SiliSleevs, here is what you do.

Remove the standard SiliSleev that came attached to the SiliStretcher.


View attachment 1821255

Attach the long 20mm x 145mm SIliSleev to the SiliStretcher with the thin end of the SiliSleev attached to the SiliStretcher and the thicker end towards your pelvic.

The thicker end is less pliable due to it having a thicker band.



View attachment 1821256

Retract the piston half way into the SiliStretcher by turning the piston knob two and a half turns.

Roll back the SiliSleev onto the SiliStretcher.



View attachment 1821257

Insert your penis inside the silistretcher so your glans is about to touch the piston.

Unroll SiliSleeve over the penis with the thick end of the SiliSleev towards the pelvic.



View attachment 1821258

Fold the SiliSleev back over itself to create a greater grip



View attachment 1821259

Turn the piston knob a half turn for 7 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.

You can also put the SIliSleev on your penis first and then attach the SiliSleev to the SiliStretcher if easier for you. Practice makes perfect.

I will post this in the main thread as well.
 
Last edited:
I will definitely try this out when I reach my 20 pounds of weight in vaccuum hanging ?

I quit compression hanging at 20 pounds and now i’m building this up again with the SiliStretcher, I am 100% convinced that stretching lots of hours is the way to go, and you’ll be gaining with less than 20 pounds of weight.

I can do 5-6 hours per day on monday -friday and on the weekends hanging after I wake up until I go to bed, that means 15 hours on saturday and sunday. I have 100% complete privacy in my dorm room and nobody will disturb me.

I can go for 40-50 hours of hanging per week and at relatively low weights. I’m tied at my desk studying so this is the ultimate solution in my personal circumstances.
 
This setup will suffice for those wanting to hang more then 10lbs or so, until the more stronger sleeves come into force.

SiliStretcher is ADS, but has evolved into allot more. It will be able to support heavier weights when the new sleeves come out.

Its not that the sleeves on sale are no good, they are very good, but these aren't originally meant to carry heavy weight on them, which can cause issues later on.

When my SiliStretcher arrives, which is tomorrow, I will not use more then 8lbs weight until I get the new sleeves.
 
REDZULU2003 said:
This setup will suffice for those wanting to hang more then 10lbs or so, until the more stronger sleeves come into force.

SiliStretcher is ADS, but has evolved into allot more. It will be able to support heavier weights when the new sleeves come out.

Its not that the sleeves on sale are no good, they are very good, but these aren't originally meant to carry heavy weight on them, which can cause issues later on.

When my SiliStretcher arrives, which is tomorrow, I will not use more then 8lbs weight until I get the new sleeves.
Click to expand...


I can’t wait to test the new sleeves and see how happy we can go. I talk to lightning he said he got 60 pounds going. I’d be happy with 50 pounds. I can create a truly amazing routine with this much weight for a very advanced users.
 
DLD said:
I can’t wait to test the new sleeves and see how happy we can go. I talk to lightning he said he got 60 pounds going. I’d be happy with 50 pounds. I can create a truly amazing routine with this much weight for a very advanced users.
Click to expand...

Outstanding ! ? and with the reverse pyramid hanging sets everyone can and will get to 10-12 inches erect length !
 
DutchAthletic92 said:
I will definitely try this out when I reach my 20 pounds of weight in vaccuum hanging ?

I quit compression hanging at 20 pounds and now i’m building this up again with the SiliStretcher, I am 100% convinced that stretching lots of hours is the way to go, and you’ll be gaining with less than 20 pounds of weight.

I can do 5-6 hours per day on monday -friday and on the weekends hanging after I wake up until I go to bed, that means 15 hours on saturday and sunday. I have 100% complete privacy in my dorm room and nobody will disturb me.

I can go for 40-50 hours of hanging per week and at relatively low weights. I’m tied at my desk studying so this is the ultimate solution in my personal circumstances.
Click to expand...
How much did you gain with compression hanger?
 
What is the scheduled release date for the new sleeves. I've been hold off ordering waiting. I almost ordered something's else but thought I would wait for a response here. If there are no updates I'll oreder another ADS later this week.
 
Want to be said:
What is the scheduled release date for the new sleeves. I've been hold off ordering waiting. I almost ordered something's else but thought I would wait for a response here. If there are no updates I'll oreder another ADS later this week.
Click to expand...


@lightening @DLD
 
TopGainer said:
How much did you gain with compression hanger?
Click to expand...

I started last year with the Male Hanger, but I had to quit after four months because it was taking too much time.

I was still in the initial beginner’s phase but i’d gained a few mm’s in BPFSL. I am a student and it was a fucking hassle to take it off every damn 20 minutes. I couldn’t multitask and focus properly on studying because I was interrupted every 20 mins. Also the re-wrapping and massaging , restoring blood circulation took alot of time. the SiliStretcher is way more convenient and you can go for 1 hour and then have a small break and check up.

If I had the time to hang all day long with the Male Hanger I would have been 8”-8.5” BPEL by now. That’s for sure. Only the time commitment man. Time investment is everything.

I did in total 6x20 minute sets per day. 7 days a week. That is the minimum amount of time you need to make gains in hanging. That’s only 2 hours per day but it makes 3-3.5 hours with all the hassle of rewrapping every 20 mins, resting, other stuff going on and it wasn‘t sustainable while being a student in a very demanding undergraduate program.
 
DutchAthletic92 said:
I started last year with the Male Hanger, but I had to quit after four months because it was taking too much time.

I was still in the initial beginner’s phase but i’d gained a few mm’s in BPFSL. I am a student and it was a fucking hassle to take it off every damn 20 minutes. I couldn’t multitask and focus properly on studying because I was interrupted every 20 mins. Also the re-wrapping and massaging , restoring blood circulation took alot of time. the SiliStretcher is way more convenient and you can go for 1 hour and then have a small break and check up.

If I had the time to hang all day long with the Male Hanger I would have been 8”-8.5” BPEL by now. That’s for sure. Only the time commitment man. Time investment is everything.

I did in total 6x20 minute sets per day. 7 days a week. That is the minimum amount of time you need to make gains in hanging. That’s only 2 hours per day but it makes 3-3.5 hours with all the hassle of rewrapping every 20 mins, resting, other stuff going on and it wasn‘t sustainable while being a student in a very demanding undergraduate program.
Click to expand...


I will choose the length master over any hanger as far as PE is concerned. The maximum you need to train daily with the length master is 1 hour and you will never hit any plateau as long as you are using the right amount of intensity and changing your routine every 3 months.

The length master is the best length device worldwide.
giphy.gif
 
huge-girth said:
I will choose the length master over any hanger as far as PE is concerned. The maximum you need to train daily with the length master is 1 hour and you will never hit any plateau as long as you are using the right amount of intensity and changing your routine every 3 months.

The length master is the best length device worldwide.
giphy.gif
Click to expand...

If you have the time for it, it’s a good device certainly. I only have the time for 10 mins of bundled stretching, and I hang for the rest of the night usually. Hands free PE is in my student phase the most convenient option.

Also the intensity by hand is very different than hanging weights. I cannot replicate 4-5 hours of hanging at a certain intensity (weight) with the lengthmaster. It’s a matter of experimenting and finding out how your tunica responds the best to various exercises. I believe I need to invest long hours in order to break down my scarred tunica full of fibrosis.
 
DutchAthletic92 said:
I started last year with the Male Hanger, but I had to quit after four months because it was taking too much time.

I was still in the initial beginner’s phase but i’d gained a few mm’s in BPFSL. I am a student and it was a fucking hassle to take it off every damn 20 minutes. I couldn’t multitask and focus properly on studying because I was interrupted every 20 mins. Also the re-wrapping and massaging , restoring blood circulation took alot of time. the SiliStretcher is way more convenient and you can go for 1 hour and then have a small break and check up.

If I had the time to hang all day long with the Male Hanger I would have been 8”-8.5” BPEL by now. That’s for sure. Only the time commitment man. Time investment is everything.

I did in total 6x20 minute sets per day. 7 days a week. That is the minimum amount of time you need to make gains in hanging. That’s only 2 hours per day but it makes 3-3.5 hours with all the hassle of rewrapping every 20 mins, resting, other stuff going on and it wasn‘t sustainable while being a student in a very demanding undergraduate program.
Click to expand...
Yeah I feel you man I’m a student to and it does become a full time job. Luckily I’m graduating. But the thing I learned to do is to split up my sets 3 in the morning and 3 at night. But you’re right the rearaoping and everything eats up so much time
 
heh92 said:
Hi guys, I wanna ask.

1. How heavy can you hang with the silistretcher?

2. Is it the device itself or is it the duros sleeve that allow for the heavier weights? When will the sleeve be out?

3. Can i buy only the silistretcher without the weight plates? It gets way too expensive with those
Click to expand...

With the current sleeves you can hang up to 20 pounds. When the Deuro sleeves come in you should be able to get to 40 pounds or better. And you do not need to buy the weights with the SiliStretcher that can be bought by itself.
 
Want to be said:
What is the scheduled release date for the new sleeves. I've been hold off ordering waiting. I almost ordered something's else but thought I would wait for a response here. If there are no updates I'll oreder another ADS later this week.
Click to expand...
You should order the Silistretcher,
while you wait for the Duro sleeves to come out. There is a double sleeve technique that would probably help.
I can’t speak to how much weight the double sleeve technique would hold, but the grip is great.
I use it as an ADS and it works really well.
 
There are only so many hours in a day. Between pumping 4x 25 and extending for 8 plus Jelqing 400 or more and manual stretching. I don't know if I would be able to find the time to use it without giving something else up. Im kind What would you do?
 
Want to be said:
There are only so many hours in a day. Between pumping 4x 25 and extending for 8 plus Jelqing 400 or more and manual stretching. I don't know if I would be able to find the time to use it without giving something else up. Im kind What would you do?
Click to expand...

I’m currently hanging with the SiliStretcher, I can go for 1 hour sets and then have a check up of my glans... That way I can stay focused on studying.

I typically hang 4-5 hours per night.
 
Started in 03 at 5.0 BPEL x 5.0 MSEG. I did a newbie like routine from a site that doesn't exist anymore, gained an inch in one year and 0.25 in girth. Then stalled for 2 years despite religious like commitment to PE and manual exercises. I was a teenager so some of the gains could have been natural growth.

I participated in Babbis' experiment at thunder's based off the IPR theory (closely related to SRT). It required me to take a decon and also look into hanging. The captain wrench sucked for me and bought the autoextender vac hanger, first edition. Got to hanging slowly but that hanger couldn't add outside vacuum and would slip around 8 lbs. I still gained 1 inch in 6 months. I stopped the experiment because I saw gains rapidly for the first time in 2 years. You can't add extra vacuum in the first hanger I had. I soon bought the Max-vac then Max-Vac II (no longer available) and then the LG (c. 2011) which is currently the best on the market. I will try the silistretcher and compare but it will be hard to beat the LG, but I'm sure it'll get the job done especially for starting out. In 08 I was 7.5 x 5.6 with base girth now 6.0, didn't measure before hanging but estimated at 5.0 because I had a baseball bat dick.

Was off and on since then because of school, work, privacy and laziness. Im coming back from at least a year off and am at 7.8 x 5.6, I've gotten up to 7.85 x 5.75 in past but wasn't cemented.
 
longstretch said:
Started in 03 at 5.0 BPEL x 5.0 MSEG. I did a newbie like routine from a site that doesn't exist anymore, gained an inch in once year and 0.25 in girth. Then stalled for 2 years despite religious like commitment to PE and manual exercises. I was a teenager so some of the gains could have been natural growth.

I participated in Babbis' experiment at ? based off the IPR theory (closely related to SRT). It required me to take a decon and also look into hanging. The captain wrench sucked for me and bought the autoextender vac hanger, first edition. Got to hanging slowly but that hanger couldn't add outside vacuum and would slip around 8 lbs. I still gained 1 inch in 6 months. I stopped the experiment because I saw gains rapidly for the first time in 2 years. You can't add extra vacuum in the first hanger I add. I soon bought the Max-vac then Max-Vac II (no longer available) and then the LG (c. 2011) which is currently the best on the market. I will try the silistretcher and compare but it will be hard to beat the LG, but I'm sure it'll get the job done especially for starting out. In 08 I was 7.5 x 5.6 with base girth now 6.0, didn't measure before hanging but estimated at 5.0 because I had a baseball bat dick.

Was off and on since then because of school, work, privacy and laziness. Im coming back from at least a year off and am at 7.8 x 5.6, I've gotten up to 7.85 x 5.75 in past but wasn't cemented.
Click to expand...

I think I personally need to go into hanging too. How many hours and how many hanging sets a day were you hanging?
 
As many as I could. Probably 1 to 6 hours 3 to 6 days a week. I know that's a broad range but I really had to cram as much time as I could and went by feel.
 
Sorry 1-6 hours per day and I did that 3-6 days a week depending on schedule and how bad I was sore. I don't have that kind of time anymore and probably never will again but I do plan on getting my masters and will probably restart a hanging routine then.
 
longstretch said:
Sorry 1-6 hours per day and I did that 3-6 days a week depending on schedule and how bad I was sore. I don't have that kind of time anymore and probably never will again but I do plan on getting my masters and will probably restart a hanging routine then.
Click to expand...

Thanks for this information. I'm afraid I might have gotten to a point where I need to change my method of PE.

I need durable stretching now.
 
huge-girth said:
I have the whole day to myself each day. Just give me that kick ass hanging routine that you are very sure will break this plaque or plateau or what you call it. I'm stuck.
Click to expand...

Check out the two new hanging routines in SRT. One is longer than the other so if you have all day to do the longer routine.
 
stillwantmore said:
To clarify. There's no need to unwrap/rewrap after every set. Not sure where this idea came from. It's nowhere in my how to content. @DutchAthletic92
Click to expand...

Well, you could wait and do nothing hoping the blood circulation will come back faster, but that’s time wasting. I definitely needed to unwrap en wrap because I’d do massaging and some dry jelqing after hanging 20-25 pounds.

After 20 mins circulation is almost completely cut off and needs to be restored fast I don’t know how you would do that without unwrapping and wrapping, and also the wrap will slip a bit always.
 
DutchAthletic92 said:
Well, you could wait and do nothing hoping the blood circulation will come back faster, but that’s time wasting. I definitely needed to unwrap en wrap because I’d do massaging and some dry jelqing after hanging 20-25 pounds.

After 20 mins circulation is almost completely cut off and needs to be restored fast I don’t know how you would do that without unwrapping and wrapping, and also the wrap will slip a bit always.
Click to expand...


I am the same way, I will re-wrap after every set, It just gives me time to massage back good blood flow and reattach nice and tight
 
You must log in or register to reply here.
Back
Top