Jackxxx UltraSound Therapy Log

okay I’ve been pulling pretty hard in my sessions and I think I sort of have that metal rod feeling a bit. Should I take a day off or just start pulling lighter? It seems unlikely I’d get a toughened septum after just a few weeks right? I thought DLD said to pull as hard as you can, maybe I was wrong. Can a toughenedseptum loosen up if it’s caught early? Sorry for all the questions just trying to learn and do this right and am now super nervous I won’t gain because of this. Thanks guys
 
okay I’ve been pulling pretty hard in my sessions and I think I sort of have that metal rod feeling a bit. Should I take a day off or just start pulling lighter? It seems unlikely I’d get a toughened septum after just a few weeks right? I thought DLD said to pull as hard as you can, maybe I was wrong. Can a toughenedseptum loosen up if it’s caught early? Sorry for all the questions just trying to learn and do this right and am now super nervous I won’t gain because of this. Thanks guys
It takes years to develop and ton of force. Does not happen overnight.

Pulling hard means nothing, unless you are using 10kg+ and stretching erect, you should not worry.


don't overthink it and:


Every extender in the market wont go pass 5kg barrier. At least most of them. There are exceptions of course.

If you ask @Jackxxx, he will tell you the same.
The chances that you have a toughened septum are very low, he developed it in over a decade of using absurd weights, as described by him.
 
It takes years to develop and ton of force. Does not happen overnight.

Pulling hard means nothing, unless you are using 10kg+ and stretching erect, you should not worry.


don't overthink it, every extender in the market wont go pass 5kg barrier. At least most of them. There are exceptions of course.

If you ask @Jackxxx, he will tell you the same.
The chances that you have a toughened septum are very low, he developed it in over a decade of using absurd weights, as described by him.
I remember hearing the Indian men who practice this are called naga babas. They have been trained from their inception to conquer lust. This is one part of their practice in order for them to conquer lust. The naked Hindu sadhus. I imagine their penises must be huge after a lifetime of practicing that.
 
Absolutely agree with you bro!!! I guess I was trying to work something out that won’t make my glans slip out of the vacum

today I tried something else

I did 30 min with 2.5 lb

then put the weight to 8lB and did the whole treatment like that there was no slippage of my glans in the vacum

I measured before the relaxation I was at 7.15 ended at 7.25

I always get the same result though

What vacum do you use? And what sleeve how much is the sleeve covering ur member?

how do I measure the heat? While I do the us do u havr

Nope, that is not how it is done. Nowhere it is indicated to stretch with a static weight and then jump up 300-400% in weight and stretch with that static weight. Please learn about how to perform stress relaxation, and I would advise to you to work based on kg and centimeters. It is way more accurate for our purpose.
 
@Jackxxx So I was wondering what a 30cm+ extender would look like, decided to assemble some parts in order to add them to an extender and WOAH!


We are talking about Stallion horse dick size here. Is this what all women refer then they say they have had 12 inches???

Now it got me wondering:

  • How would you be able to supply enough blood without passing out?
  • Have you thought in some ligament toughening in order to maintain a 90º erection or not worried about it hanging down your knees?
  • How will affect the gravity to the tissues? Could hypoxia occur?


Yes that is how a foot of extender looks like. But even before that, let us say just using an extender for a 9 inch penis is too big to conceal in your pants or shorts. Impossible. Back in the day I used to wear an extender sometimes going out, I had to put a pair of underwear, then some swimming shorts, then basketball shorts, then cargo shorts on top very lose and baggy, plus a huge t-shirt hanging way past down my waist line. Very uncomfortable and unnecessary.

In terms of blood supply, the problem is not actually reaching an erection, the problem begins when you have to perform with this erection. Just moving to fuck, will either make the erection subside or feeling very out of breath very fast. All of that is unexplored territory and we will have to see over time what happens.
 
@Jackxxx

I got a question:

Lest say one would use caverject to obtain 100% erections and combine it with UT, wouldn't that bring results to BPEL, instead of BPFSL?

Why caverject? Because that would really make us focus on solely Erect length, since we would have our penises at their maximum length possible for the duration of the therapy. And since we should follow a x3 per week routine, we wouldn't desensitize to pge-1.


Let me know what you think

Not necessarily. Just the fact of having an erection with US will not translate into growth. The tunica need in reality a tremendous amount of pressure per square inch to promote elongation. Your natural blood pressure will never be able to provide that internal push.

Kyrpa in fact already researched this method, while clamping. Clamping will really allow you to put extra internal pressure on the tunica. However, there are many risks involved, serious risks. His preliminary results were somewhat promising, but nothing that could lead to an established protocol with measurable daily progress.
 
Yes that is how a foot of extender looks like. But even before that, let us say just using an extender for a 9 inch penis is too big to conceal in your pants or shorts. Impossible. Back in the day I used to wear an extender sometimes going out, I had to put a pair of underwear, then some swimming shorts, then basketball shorts, then cargo shorts on top very lose and baggy, plus a huge t-shirt hanging way past down my waist line. Very uncomfortable and unnecessary.

In terms of blood supply, the problem is not actually reaching an erection, the problem begins when you have to perform with this erection. Just moving to fuck, will either make the erection subside or feeling very out of breath very fast. All of that is unexplored territory and we will have to see over time what happens.
True, and extender is noticeable in shorts, and it isn't entirely easy to move around with. I wear one though from time to time. I'm also on a 350 acre farm in Vermont, in the mountains, so I'm not coming into contact with others very often in this remote area, though if I was, I wouldn't find the extender convenient to wear otherwise. The SS2 also creates a bulge, though thankfully the design is streamlined especially to wear comfortably, and much more discreetly, imo.
 
Nope, that is not how it is done. Nowhere it is indicated to stretch with a static weight and then jump up 300-400% in weight and stretch with that static weight. Please learn about how to perform stress relaxation, and I would advise to you to work based on kg and centimeters. It is way more accurate for our purpose.

Hi Jackxx thanks for your help .
I got a thermometer and a proper m assuring in cm I also got a noose hanger to have more of my shaft exposed I figured if my shaft is not exposed enough it’s not good what do you think?

I will go back to the original protocol of slowly adding weights and hopefully I can gain like that

I’m suppose to have everything set up this week I will keep a log and write everything down I hope to gain…

jackxxx what do you do for actual BPEL?
 
  • Like
Reactions: DLD
Kyrpa in fact already researched this method, while clamping. Clamping will really allow you to put extra internal pressure on the tunica. However, there are many risks involved, serious risks. His preliminary results were somewhat promising, but nothing that could lead to an established protocol with measurable daily progress.

That's why I had that thought. Mainly because I Thought about combining caverject + clamping + 2 UT devices (
Since my BFPSL is above 15cm)

I am really intrigued about it. IR HEAT + UT + Clamp + Caverject [Maximum expansion] What if we combined all that with a modified pump?

Couple of questions:

Is the two month rest periods imperative to be waited? Would something happen if for example one individual decides to rest more between phases?

Like for example:


2 phases per year of 6 weeks each, total of 12 weeks, focusing only on BPFSL.

and

40 weeks focusing on BPEL

  • Would that be a wrong approach?

//

Isn't using a clamp on the rope basically a creep setup? Since its a static weight ramping up.
 
Hi Jackxx thanks for your help .
I got a thermometer and a proper m assuring in cm I also got a noose hanger to have more of my shaft exposed I figured if my shaft is not exposed enough it’s not good what do you think?

I will go back to the original protocol of slowly adding weights and hopefully I can gain like that

I’m suppose to have everything set up this week I will keep a log and write everything down I hope to gain…

jackxxx what do you do for actual BPEL?

Remember to also measure tension. Weight. You have to know how much you are putting and how much you have in total.

For BPEL, nothing right now. Only BPFSL.
 
That's why I had that thought. Mainly because I Thought about combining caverject + clamping + 2 UT devices (Since my BFPSL is above 15cm)

I am really intrigued about it. IR HEAT + UT + Clamp + Caverject [Maximum expansion] What if we combined all that with a modified pump?

Couple of questions:

Is the two month rest periods imperative to be waited? Would something happen if for example one individual decides to rest more between phases?

Like for example:


2 phases per year of 6 weeks each, total of 12 weeks, focusing only on BPFSL.

and

40 weeks focusing on BPEL

  • Would that be a wrong approach?

//

Isn't using a clamp on the rope basically a creep setup? Since its a static weight ramping up.

If you decide to rest more in between periods of US, even better. The more you rest, the more decoditioning you allow to happen. The 2 months is kinda the minimum. But more is even better.

The clamp in the top does the opposite: Strain. Because it allows for the tissues to relax and reduce the tension as they elongate. When you remove the clamp, then the tension stays there continuously. That is creep.
 
The clamp in the top does the opposite: Strain. Because it allows for the tissues to relax and reduce the tension as they elongate. When you remove the clamp, then the tension stays there continuously. That is creep.
AHHH got it, thank you!
 
  • Like
Reactions: DLD
@Jackxxx

  • What if we used it while the penis is submerged underwater? Water is a good conductor. Better than depending on ultrasound gel that dries fast.
We could combine it with the UT device since it has IPX7 rating, but just only the head of the transducer and use like a condom wrapped, since it will penetrate anyways right?
  • Could an extender be used? Instead of hanging, even though I have all the setup(weight, pulley, clamp, thermocoupler, 5l ultrasound gel, rope + ruler + Ir lamp) for when I get home.
  • Why couldnt an extender be used? The hole setup with an extender will result in Creep, instead of strain?

//
On a side note:

I would like to replicate your caverject experiment, since i have found sooo many patents about penis girth enlargement induced by pge1 injections that I really want to try them, and since you tried it and your girth went up to 6.25" if has left me intrigued.

As I stated on other post, I got a prescription for caverject by my doctor.
  • What would be more cost effective:
    • Buying a vial of 20mcg = I would have 8 doses of 2.5mcg. (If backfilled and injected with an insulin needle)
    • Buying a vial of 10mcg = I would have 4 doses of 2.5mcg. (If backfilled and injected with an insulin needle)
Since 2.5mcg made me pop a boner when the doctor tested it. The price is the same for both, 14.95€ each box.
  • Did you inject before bed, in order to aid with your nocturnal erections?
  • What pinning protocol did you follow? EoD? or ED injections?
  • Did you find any resistance? Like needing to use more overtime?


US under water is the best possible scenario. In water all the sound waves pass flawlessly without any resistance or interference. The problem is how to do it. If you put a condom on it, the sound waves get distorted. And I am not aware of a transducer that is water resistant.

Extender is one of the ways to do it. In fact, an extender provides a more accurate strain since the apparatus is fixed against the body and tension is determined by the rods.

The PGE-1, you cant really determine how many doses you have because it all depends on how much you will need. Of course you can start with a 2.5mcg dose and count the time the erection last and that will give you an initial reference.

I did my protocol at night, and that assisted my natural erections throughout the night.
Every day.
No resistance, it is my experience and knowledge that all those factors like tolerance or scar tissue are directly linked to chronic essential nutrient deficiency and poor nutrition.
 
@Jackxxx

I have been reading kyrpas approach to target girth, he was just using viagra + UT + clamps


  • What if we clamped + injected pge1 to sustain a FULL 100% erection + heat with with two devices?

I am only worried about ischemia in the tissues, due to the oxygen uptake being higher while under heat.

  • What I don't seem to understand is how he approached it, did he target width or girth?

Also what I don't understand why pumping with limited length brings better expansion? Did I get that wrong?


I dont know, I wouldn't try US on a clamped dick with PGE-1. Not until I see enough research studies.

I dont understand that about pumping with limited length. Who said that?
 
Quick update,

I have been unable once again to follow protocol these days, extremely busy with work and business. However, I have been measuring daily and I am staying at 25.3-25.4. I believe once I measure consistently for some 2-3 days at 25.5, I will declare 10 inches in BPFSL reached and the end of Period 2 which would have provided a full 1.4cm on BPFSL.

Since I have received my water trap, I will soon (time provided) start tests for a BPEL protocol.
 
Are there any ways to measure temp inside the tube?

Yes but it depends. If you are water pumping, then you can just guide a thermocouple inside the tube. Since its a thin wire it wont affect seal or vacuum.

But if you're using an IR lamp for example, it gets more tricky. If you lead the wire to the side of the tube where the lamp is heating, temp will be higher. If you put the wire on the side of the shade, it will be lower. And even more tricky. That will not represent real internal penile temp, in that case you need to guide the thermocouple inside the tube and then down the urethra to get a real internal temp.

With water as explained is easier. The water will be evenly heated around, and from using US experience we might be able to predict how long it will take for the internal penis to reach that target temperature.
 
Yes but it depends. If you are water pumping, then you can just guide a thermocouple inside the tube. Since its a thin wire it wont affect seal or vacuum.

But if you're using an IR lamp for example, it gets more tricky. If you lead the wire to the side of the tube where the lamp is heating, temp will be higher. If you put the wire on the side of the shade, it will be lower. And even more tricky. That will not represent real internal penile temp, in that case you need to guide the thermocouple inside the tube and then down the urethra to get a real internal temp.

With water as explained is easier. The water will be evenly heated around, and from using US experience we might be able to predict how long it will take for the internal penis to reach that target temperature.
Ok, got it. Until now I’ve been air pumping with a heat pad on (around 45-50 C) and this gave me great results in girth and bpel. Unfortunately I can’t water pump right now so I’ll see if I figure out a way to measure the temp even without water...
 
A quick update.

I have succeeded in keeping the target goal of 25.4cm of BPFSL. Which equals 10 inches in length. This marks the end of Period number 2 with success, marking a 1.4cm of net gain in BPFSL. This is 3.4cm combined between Period 1 and Period 2, 1.33” in BPFSL which is absolutely remarkable, and the future looks very promising.

Although I have very little time lately due to businesses, I will focus now on BPEL until the time comes for Period 3, with the hopes that this bridge and experimentation lead to successful BPEL gains. Current BPEL stays at 23.5cm which equals 9.25”. The ideal scenario would be to close the gap and bring BPEL up to 10 inches before putting full power towards the foot or 12 inches.
 
A quick update.

I have succeeded in keeping the target goal of 25.4cm of BPFSL. Which equals 10 inches in length. This marks the end of Period number 2 with success, marking a 1.4cm of net gain in BPFSL. This is 3.4cm combined between Period 1 and Period 2, 1.33” in BPFSL which is absolutely remarkable, and the future looks very promising.

Although I have very little time lately due to businesses, I will focus now on BPEL until the time comes for Period 3, with the hopes that this bridge and experimentation lead to successful BPEL gains. Current BPEL stays at 23.5cm which equals 9.25”. The ideal scenario would be to close the gap and bring BPEL up to 10 inches before putting full power towards the foot or 12 inches.
Thats crazy Jack! Keep it going man i remember seeing your progression a while ago with the TP roll test lol good job! What is your girth like as of now, does it increase as your length increases? Also i replied to your question on my post about BPEL to BPFSL, didn't get a response. I dont know if your getting my notifications or tags.
 
Help Users

You haven't joined any rooms.

    You haven't joined any rooms.
    Back
    Top