DSD Progress log

I only go for girth.

So bundles are OK?
Definitely. Bundles are perfectly fine. Just allow a few days of rest first so your tissues can heal up and then pursue bundles. As DLD suggested, don't go crazy with erected penis routines. Blemishes will continue to show up if you don't allow the sufficient time for the tissues to heal.
 
  • Love
Reactions: DLD
I had to at least try my new motor on pump cylinder. It was amazing. I only went up to 5Hg for 30s on 1st and 6Hg for 30s on 2nd pump. It was a bit late at night so I didn't get up to 2400rpm as supposedly needed. 1800rpm at most. Felt like I was gonna nut going any higher. Definitely will be very effective in the future.

I should've flipped to side that had the ruler so it was easier. But even at just 6Hg I was around 9 inches.

Too bad can't combine water and the vibrations. Or at least would be very difficult.
 
Last edited:
I had to at least try my new motor on pump cylinder. It was amazing. I only went up to 5Hg for 30s on 1st and 6Hg for 30s on 2nd pump. It was a bit late at night so I didn't get up to 2400rpm as supposedly needed. 1800rpm at most. Felt like I was gonna nut going any higher. Definitely will be very effective in the future.

I should've flipped to side that had the ruler so it was easier. But even at just 6Hg I was around 9 inches.

Too bad can't combine water and the vibrations. Or at least would be very difficult.
You can use with water, but make sure to have a massive water trap of 2 liters or more. Unfortunately, you have to keep the cylinder vertical at all time. That will cause your vibrating motor usage to a difficult position.

Unfortunately, the cylinder designers could not create a dual-valve system at the top without compromising the cylinder under vacuum pressure. The dual valve is for water in and water out. They tried to make the dual-valve cylinder and the top area cracked multiple times on different cylinder sizes under 20 inHg. They even put a V-valve system on the single-valve cylinder as well. It worked, but not enough fluid to fill the cylinder and pressure building up was very slow. It took nearly 3 times the pumping just to achieve the needed pressures. They have to redesign the V-valve properly, without causing accidental puncture if the penis goes too high into the cylinder.
 
I wonder whether water pumping is more heavily contributing to the red dots and discoloration. First time I ever got the red dots was from bathmate. My feeling is that water pumping tends to have less edema and better overall expansion. But maybe more discoloration? At least for me. Could it be that increases in pressure while water pumping are more quickly translated to the tissues?
 
You can use with water, but make sure to have a massive water trap of 2 liters or more. Unfortunately, you have to keep the cylinder vertical at all time. That will cause your vibrating motor usage to a difficult position.

Unfortunately, the cylinder designers could not create a dual-valve system at the top without compromising the cylinder under vacuum pressure. The dual valve is for water in and water out. They tried to make the dual-valve cylinder and the top area cracked multiple times on different cylinder sizes under 20 inHg. They even put a V-valve system on the single-valve cylinder as well. It worked, but not enough fluid to fill the cylinder and pressure building up was very slow. It took nearly 3 times the pumping just to achieve the needed pressures. They have to redesign the V-valve properly, without causing accidental puncture if the penis goes too high into the cylinder.
So happy I am of you as a moderator and with so much knowledge.
 
I wonder whether water pumping is more heavily contributing to the red dots and discoloration. First time I ever got the red dots was from bathmate.
No, it's not just water. It happens with air as well. It's more about internal pressure vs vacuum pressure. When the internal pressure is lacking or over exerted, and the external pressure is higher than the penis skin and tissues can handle, you get the red dots, or blemishes.

My feeling is that water pumping tends to have less edema and better overall expansion.
That is true.

But maybe more discoloration?
No, same effects, but at different pressure levels.

At least for me. Could it be that increases in pressure while water pumping are more quickly translated to the tissues?
Yes. Under optimal conditions, such as internal pressure is maxed out, vacuum pressure also rises, the volume of blood exceeded the fascia layers' handling capacity. Gaps are created and the blood seeps through into the skin.
 
7/22/24

Morning vitamin E quick massage in.
Kegels 14s holds x 10 reps x 3 sets. 3-5s relax between reps, 1 min between sets.

Night
Warmup: heatpad. Bundled stretches using theraband yellow wrapped somewhat tight and oxball pulling skin down. Squeezed blood out consistently. Found that 1 turn was kind of difficult. Did 1 turn for first 4, 1 min hold. Then did 1.5 turns 1 min hold for 4 more. Light jelqs

Mityvac air 2.125x12” cylinder with 3600rpm vibration motor speed adjustable.
5-6mins @4 to 5Hg then pulse 6hg
5-6mins @4 to 6Hg then pulse 7
5-6mins @4 to 7Hg

I had motor at like 40% which was pretty intense. Expansion was pretty good. I was about at 9 inches with lowish pressures. The vibration is very effective. I am a bit concerned about the vibration at base against pubic area. I am not sure, if I was going at higher pressures and getting up to the 60% speed, if it would be too intense. I did feel like I got fatigued after the 2nd pump. If the vibrations are causing more fatigue, that makes sense right?

There is discoloration obviously but not worse than before. No edema. I’m not sure if I want to try pumping every other day? I want to see how this works before going 1 month break. I’ll stay 7Hg and below. 2-3x 5min pumps.

Gonna put some vitamin E on before bed. No time for redlight. I did do some heatpad right after. I don't want to do cockring right now.
 
7/24/24

Morning: Vitamin E massage in
Kegels 1 set 14s hold, 5sec relax x 10 reps. 2 sets each of 2sec hold of front and back pelvic floor and 4 sec release alternate with 50% effort hold front/back 30s hold.
Stretching: did full stretching for about 5mins. Hips, pelvis, back, legs

Mini session: edging with hand-clamping then hand-clamp with compression holds 15s tops. Rather than pushing into glans with palm, I am cupping hand all the way around to spread the pressure. I really don’t like doing o-ring compressions. And I don’t like moving the base hand.
Vitamin E after shower.

Night:
Warmup: heatpad, light jelqs

Mityvac air 2.125x12” cylinder with 3600rpm vibration motor speed adjustable. I did do a few hand-clamps with compression but not consistently.
5mins @4 to 5Hg then pulse 6hg, 30% motor, 40% at pulse. Using mitysleeve..
6mins @4 to 6Hg then pulse 7, 30% motor, 40% at pulse. Using mitysleeve..
6mins @4 to 7Hg then pulse 8, 30% motor, 40% at pulse
edit: Active cockring 10mins
Active cockring 10mins, wrapped in heatpad with motor on top at 40%

Max expansion was 9 3/8" I think. Motor is super effective and much more efficient. No edema. Discoloration still. Mitysleeve ripped on my first session with it. Yikes. Yes, I was using coconut oil, which probably didn’t help.

I might wait 3 days to pump again, monitoring color. Though, I have visitors from Fri to Fri which might make another week off be a better idea. I just have a feeling I’m gonna need a full month to get back to where discoloration is gone and doesn’t come back so easily.
 
Last edited:
Looks like the pump motor is doing a number on you. While phase or resting, keep the penis lightly wrapped for elongation after some quick stretches. It's not for active elongation. It's more for your brain telling it to focus on the penis more often even during inactive PE period. I love playing around with the brain's to reprogram it like a computer language. Unfortunately, it's not as simple.
 
Looks like the pump motor is doing a number on you. While phase or resting, keep the penis lightly wrapped for elongation after some quick stretches. It's not for active elongation. It's more for your brain telling it to focus on the penis more often even during inactive PE period. I love playing around with the brain's to reprogram it like a computer language. Unfortunately, it's not as simple.
What do you mean "doing a number on you"? That's usually a negative thing.
 
What do you mean "doing a number on you"? That's usually a negative thing.
Nope. In PE, it's a positive thing. When a tool, device, or routine that does a number on the penis, balls, or surround muscles ligaments, that is a great thing. Same as working with weight. If the weight are doing a number on you, that means the weight is acting with extreme intensity to work your body up to an optimal degree.
 
Looks like the pump motor is doing a number on you. While phase or resting, keep the penis lightly wrapped for elongation after some quick stretches. It's not for active elongation. It's more for your brain telling it to focus on the penis more often even during inactive PE period. I love playing around with the brain's to reprogram it like a computer language. Unfortunately, it's not as simple.
Love this 😀
 
Crazy thing is I haven't even turned it up to 2400rpm. It has 11 markings from min to max of 3800rpm. So 7th marking is roughly 2400rpm and I've only put it up to 4th marking because it's so intense. I need to build up my tolerance otherwise its gonna make me nut lol. Also, I was using the mitysleeve in my last session because it helps with the vibration and pubic base. Without a significant fatpad, I am not sure that vibration is good against nerves there. If I do go higher, it won't be for the entire 5mins, I'll wait until the last minute to jack it up.
 
7/25/24

morning
Kegels: 3x 2s front/back, 4s release alternate with 50% effort front/back 30s hold
Full stretching routine (edit: clarifying that I am talking about muscle stretching, related to pelvic floor)

Mini-session:
6 bundled stretches. Still trying to limit the stretching of the skin around the base.. Washed my junk to remove oils then put on oxball to pull skin down. Then wrapped green theraband around shaft and then a leluv silicone sleeve down to the base. Squeeze blood out each time. Using base hand to keep that silicone sleeve anchored. First twist holding middle then 2nd just below glans. 30s hold just twisting then 30s of pulling hands apart.

Then I was edging while doing hand-clamps with and without cockring on. 3 sets of 15s compression holds cupping around glans each side. Put cockring on then repeat with hand-clamp just above cockring. Edging without cockring on with vibrator. Then put cockring on and jump in shower. Finish up with FG rolling my vitamin E oil on.

Bruise cream with vitamin K, C, E and arnica to arrive on Saturday. Maybe it will be effective, maybe not. It should be valuable generally for the future.
 
Last edited:
  • Like
Reactions: DLD
7/26/24
vitamin E couple split through day with FG rolls
Kegels: 3 sets: 2s pulse front/back/4s release, alternate with 50% effort front/back 30s hold

Mini-session: edging with hand-clamping and cockring. 15s compressions (cupped around head) while hand-clamping. X3 each side. Then put on cockring and repeat. Head is looking more swollen lately in a good way. Using vibrator to edge. Did reach orgasm. Put cockring back on after.

Night mini-session: same. More hand-clamp with and without cockring and compressions. No vibrator. Being quiet…
 
  • Like
Reactions: DLD
7/27/24

No kegels other than during sessions

Morning: mini-session hand-clamping and compressions. Vitamin E

Full body stretches

Afternoon: another session of hand-clamp, cockring, compressions. But first washed oils off with soap and water and put on oxball. Then alternated 10 gua sha scrapes with moderate pressure each side and FG rolls for about 1 min until I did 50 gua shas scrapes each side. Building a sort of routine.. Start with no cockring, just hand-clamp for 30s then alternate sides a couple times. Then put on cockring and hand-clamp alternate sides. Then cockring off, maintain hand-clamp through 3 sets of 15s compression holds with 5-10s off, then alternate sides twice. Then cockring ON, maintain hand-clamp through 3 sets of 15s compression holds. Light massage or jelq or FG roll between alternations. Some edging with vibrator with and without cockring on. Left cockring on for 10 mins after stopping manuals. Applied vitamin E after shower.

Night: mini-session – basic hand-clamp routine but less repetitions. EQ wasn’t as great because distractions.

Redlight, vitamin E
 
  • Like
Reactions: DLD
7/28/24

Kegels normal
Used bruise cream first time (arnica, vit K, vit C)

Soft/hand-clamping session (oxball on): CR=cockring, HC=hand-clamp. Progression: 2x HC, no CR 30s holds alternate sides --> repeat with CR x2 --> 2x HC, no CR 30s hold and maintain then 15s compression x 3, DLD bends x 10 and upward bend x 10, alternate sides --> repeat with CR x 2 --> HC, no CR 30s hold then slide grip ~½ inch and hold 30s and maintain and 60 compression pulses, DLD bend x10, upward bend x 10, alternate sides --> repeat with CR.

I realized I needed to add in the DLD bends since I could tell that the compressions were giving a lot of depth. And upward bend to make sure I am not making myself bend down more.

Honestly, I think these work. When I get back to pumping, I won’t do the full progression but I’ll do some hand-clamps with compressions for 5-10 mins.

Bruise cream again

I’ve been keeping heat fairly light lately. I think I was overdoing the heat.

Night: 2 mins of pelvic floor ‘release’. 5-10mins of stretches
Another soft/hand-clamp session. Excellent EQ and ballooning.
Vitamin E
 
Back
Top