Progress thread Dave4139 D DIARY

Alright fellas. MityVac showed up. (Took til 9pm to get here. I wish I could’ve just drove the half mile across town to USPS and walked in and got it.

However. This thing is so much better than a Bathmate. DLD the tube recommendation was spot on for length pumping. I could literally see it gaining length as I squeezed the handle.

One question I do have- as tonight was more of just a familiarization exercise.

Do y’all typically keep the pump connected to the MityVac? And keep adding pressure since it slowly fades down.

Or are you going to a max pressure- and disconnecting the valve/ hose set up to lock in the pressure?

Which is the intended way?

I stayed below 10hg the whole time tonight for safety and man did it still get real red.

The length I was able to see as I started pumping was great. It’s just what I need. The BM will be great maybe 1-2x a week just for a pump up in girth. But this will definitely be part of the rotation now. I’m excited.
 
Abdiel Bull Berg said:
Yepp, it’s the HydroMax you’ve got then as the Xtreme comes with a hose and a hand held pump that you squeeze. The HydroMax I think goes up to about 15hg if I remember correct, read it somewhere, so you should be able to handle 10hg in the MityVac like a champ.

Going for 5 mins max is a good idea as it will be less fluid build-up and discoloration. Used to go for 15-20 mins straight with my first Bathmate, a HydroMax 7, and always got some serious doughnut dick, severe fluid build up and bad discoloration. What I do to prevent discoloration is to roll my penis back and forth between the palms of my hands. Almost massaging my penis.
Click to expand...

Also. Tips on type of lube you use for length pumping and how to clean inside the tube afterwards lol.
 
Always maintain a steady hg. If you can handle it start to work on the 5x5x3. This will profit you big time
 
DLD said:
Always maintain a steady hg. If you can handle it start to work on the 5x5x3. This will profit you big time
Click to expand...

Even just toying around with it last night I feel like I’ll gain so much more using this than the BM since length is my main goal- plus if I SSJ between length pumping I’m not ignoring Girth completely
 
Last edited:
Alright. 5x5x3 with Mity Vac today. Kept it around 10hg pressure.

Still getting used to the pump- I kept it attached to the valve today bc when I released I would notice I’d lose length. Keeping it attached I was able to pump up to 6.75 or so and hold that from my normal 6.5 or so length.

During the SSJ portion I was doing SSJ and some deep jelq type stuff just to expose more inner penis for extra length.

Already a huge fan of the MV and think I enjoy it more than the LM3 even. Pumping just seems to work best for me- but the pros swear by LM3 as the premier tool so I won’t abandon it.

Def excited about the MV purchase and it’s potential.

Of note. Air pumping definitely gets me discolored more than hydro pumping.
 
2 5x5x3 pump session today in MVac. Mostly just to gain experience with it

Although the second round I shortened it to 4 min.

Still dry pumping. I don’t use sleeves or cap etc. I guess we will see tomorrow if I get fluid retention or how red etc. it just seems like a lot of extra work to lube up the sleeve enough to get it in. Already having enough trouble getting the erection through the end cap sleeve that thing is tight. I’m sure it will loosen with use though.

Love the precise ruler in the MVac where you can see .1 increases.
 
Dave4139 said:
Also. Tips on type of lube you use for length pumping and how to clean inside the tube afterwards LOL.
Click to expand...
I just use some water or coconut based lube and all I need to do to clean it is to properly rinse it off in the shower and then just wipe it dry with a hand towel. Real easy to do.

And yes, always keep the hose/hand-pump attatched to the valve.
 
Dave4139 said:
Alright. 5x5x3 with Mity Vac today. Kept it around 10hg pressure.

Still getting used to the pump- I kept it attached to the valve today bc when I released I would notice I’d lose length. Keeping it attached I was able to pump up to 6.75 or so and hold that from my normal 6.5 or so length.

During the SSJ portion I was doing SSJ and some deep jelq type stuff just to expose more inner penis for extra length.

Already a huge fan of the MV and think I enjoy it more than the LM3 even. Pumping just seems to work best for me- but the pros swear by LM3 as the premier tool so I won’t abandon it.

Def excited about the MV purchase and it’s potential.

Of note. Air pumping definitely gets me discolored more than hydro pumping.
Click to expand...
When it comes to discoloration just massage/roll your penis back and forth between the palms of your hands after every pumping set.

I do it everytime myself and get way less discoloration from doing so.
 
Abdiel Bull Berg said:
I just use some water or coconut based lube and all I need to do to clean it is to properly rinse it off in the shower and then just wipe it dry with a hand towel. Real easy to do.

And yes, always keep the hose/hand-pump attatched to the valve.
Click to expand...

I wonder if I’m doing something wrong- when I pump up to say 10hg pressure….is it supposed to hold at that pressure continuous?

Mine will drop down to like 7/5 and I have to squeeze the hand pump to get it back up etc.

So I’m spending the 5 min pumping every so often to keep pressure. Is there a valve switch or something im not doing? Or do you just continually hand pump to maintain pressure.

I’m ignorant but the Bathmate just maintained pressure and locked it in place.
 
Dave4139 said:
I wonder if I’m doing something wrong- when I pump up to say 10hg pressure….is it supposed to hold at that pressure continuous?

Mine will drop down to like 7/5 and I have to squeeze the hand pump to get it back up etc.

So I’m spending the 5 min pumping every so often to keep pressure. Is there a valve switch or something im not doing? Or do you just continually hand pump to maintain pressure.

I’m ignorant but the Bathmate just maintained pressure and locked it in place.
Click to expand...
Make sure you have a good seal at your "fat-pad"
Also check to see if the valve at the top of cylinder isn't loose. Don't tightening it to much. Only use your fingers, if you need to tighten it.

This have happened before, this is the reason I know about this.
 
Dave4139 said:
I wonder if I’m doing something wrong- when I pump up to say 10hg pressure….is it supposed to hold at that pressure continuous?

Mine will drop down to like 7/5 and I have to squeeze the hand pump to get it back up etc.

So I’m spending the 5 min pumping every so often to keep pressure. Is there a valve switch or something im not doing? Or do you just continually hand pump to maintain pressure.

I’m ignorant but the Bathmate just maintained pressure and locked it in place.
Click to expand...
Not to sure what it could be causing that, I don‘t seem to have that problem. Have you shaved your pubes and put some lube inside the entrance of the tube? This is what I do and it always gives me a perfect seal.

But then again I never stay at the same pressure for more than a few seconds as I just keep on pumping, slowly, until I’m at the max pressure I can take and stay there for a little while until my 5 mins have passed before realising the pressure.
 
Abdiel Bull Berg said:
Not to sure what it could be causing that, I don‘t seem to have that problem. Have you shaved your pubes and put some lube inside the entrance of the tube? This is what I do and it always gives me a perfect seal.

But then again I never stay at the same pressure for more than a few seconds as I just keep on pumping, slowly, until I’m at the max pressure I can take and stay there for a little while until my 5 mins have passed before realising the pressure.
Click to expand...

I think SIM hit it. I imagine the valve cap just needs a little more tightening. Traveling all day today so I’ll give it a shot tonight. Bc the pressure builds up but slowly bleeds off. Prob a tiny leak.
 
Dave4139 said:
I think SIM hit it. I imagine the valve cap just needs a little more tightening. Traveling all day today so I’ll give it a shot tonight. Bc the pressure builds up but slowly bleeds off. Prob a tiny leak.
Click to expand...
That is probably your solution. But only use your fingers to tighten it. You probably only need to tighten it a little bit more.
 
  • Like
Reactions: DLD
Fixin to hit the LM3.

Will implement ball lig warm up stretches as the routine from now thanks to discussions on Abdiels thread.

I plan to mity vac later as well.

Open to suggestions on how to alter or improve what I’ve been doing.
Life got in the way. Had a short hiatus with sickness and such. Back at it hard for December. I’m prob 6.6? 6.7? On a good day length wise with good EQ, and solidly 6.5.

I have a strange feeling I can hit 7” BPEL in the next 30 days. It just feels right for some reason.

Also- since I’m mity vacing for length now- am I able to do that PRIOR to LM3? I feel like stretching it when it’s already big would be awesome
 
Dave4139 said:
Also- since I’m mity vacing for length now- am I able to do that PRIOR to LM3? I feel like stretching it when it’s already big would be awesome
Click to expand...
Better to do LM3 bundled stretches before mity vacing, in that way your tunica albuginea are loosen up and you will get bigger expansion with your SRT 5X5X3 routine. A temporary expended penis can be hard to attach in the chamber + you risk developing blisters from doing that.
 
squirt_inducer_man said:
Better to do LM3 bundled stretches before mity vacing, in that way your tunica albuginea are loosen up and you will get bigger expansion with your SRT 5X5X3 routine. A temporary expended penis can be hard to attach in the chamber + you risk developing blisters from doing that.
Click to expand...

Followed both this advice AND the tightening of the top MV valve.

Both worked like a charm. Hit 6.85/6.9 in the pump!
 
Dave4139 said:
Fixin to hit the LM3.

Will implement ball lig warm up stretches as the routine from now thanks to discussions on Abdiels thread.

I plan to mity vac later as well.

Open to suggestions on how to alter or improve what I’ve been doing.
Life got in the way. Had a short hiatus with sickness and such. Back at it hard for December. I’m prob 6.6? 6.7? On a good day length wise with good EQ, and solidly 6.5.

I have a strange feeling I can hit 7” BPEL in the next 30 days. It just feels right for some reason.

Also- since I’m mity vacing for length now- am I able to do that PRIOR to LM3? I feel like stretching it when it’s already big would be awesome
Click to expand...
So glad you chose to implement ball & lig stretches as they really do work, and they work fast as well.

Starting to think I should by a smaller tube as in the 1,75 incher as well since you seem to get some good length expansion from it.

By the way, just got a bit sick the last couple of days myself with a sore throat and runny nose. Still getting shit done, just like you. Nothing can stop us when we are determined and have goals to achieve.
 
Abdiel Bull Berg said:
So glad you chose to implement ball & lig stretches as they really do work, and they work fast as well.

Starting to think I should by a smaller tube as in the 1,75 incher as well since you seem to get some good length expansion from it.

By the way, just got a bit sick the last couple of days myself with a sore throat and runny nose. Still getting shit done, just like you. Nothing can stop us when we are determined and have goals to achieve.
Click to expand...

The 1.75 tube MV has been the most impactful for me yet- mostly just bc I can SEE the expansion happening. I guess I enjoy the psychological effect from pumping more than the LM3 bc visually it’s more apparent after you’re done training.

I use the LM3 purely out of listening to DLD and sim. Obviously it works bc I started to gain as soon as I got it and started using it. There’s just something about looking down and seeing full expanded member after a pump that gains confidence even though it’s temporary.
 
MVAC tonight. 5x5x3

Didn’t have it in me to do LM before hand. Also wanted to see if there was a difference. Indeed doing the LM before seems to get you starting from a better spot.

Pulling out of the MV is getting tough. ESP since I pumped last night. Guess it retained some girth.
Post pump I was measuring like 5.3 completely flaccid. So maybe I’ve got some girth gains from it as well.

Length wise was hitting 6.7-6.8 mostly. Pressure felt strong today for some reason. Last round I guess I had better EQ and was at 6.9. so the final 30 seconds or so I increased pressure up to 12-15 just to break the 7 barrier even just momentarily. 😂🤣
Maybe got to 7.1-7.2 but it was tough so I wasn’t paying that close attention and just wanted it off lol.
 
Dave4139 said:
The 1.75 tube MV has been the most impactful for me yet- mostly just bc I can SEE the expansion happening. I guess I enjoy the psychological effect from pumping more than the LM3 bc visually it’s more apparent after you’re done training.

I use the LM3 purely out of listening to DLD and sim. Obviously it works bc I started to gain as soon as I got it and started using it. There’s just something about looking down and seeing full expanded member after a pump that gains confidence even though it’s temporary.
Click to expand...
Now I will most definitely buy a 1.75 tube as soon as I got the extra cash for it. And I know what you mean, pumping gives instant, all though temporary results that are very pleasing to the eye and mind. Excited about seeing how much more I’ll expand in length with a smaller tube.

As soon as I get Vyvanse again I will start pumping in the evenings, as that ADHD medication gives me that extra energy throughout the whole day.

Concerta and Ritalin just don’t cut it for me and I get a major crash in the evenings. Love my ADHD meds as they have made me totally stop doing drugs, even stopped smoking weed and drinking as I feel no need for it anymore, but I digress.
 
Dave4139 said:
MVAC tonight. 5x5x3

Didn’t have it in me to do LM before hand. Also wanted to see if there was a difference. Indeed doing the LM before seems to get you starting from a better spot.

Pulling out of the MV is getting tough. ESP since I pumped last night. Guess it retained some girth.
Post pump I was measuring like 5.3 completely flaccid. So maybe I’ve got some girth gains from it as well.

Length wise was hitting 6.7-6.8 mostly. Pressure felt strong today for some reason. Last round I guess I had better EQ and was at 6.9. so the final 30 seconds or so I increased pressure up to 12-15 just to break the 7 barrier even just momentarily. 😂🤣
Maybe got to 7.1-7.2 but it was tough so I wasn’t paying that close attention and just wanted it off LOL.
Click to expand...
Eventually your penis will become so conditioned that 12-15hg will feel like nothing, at least that’s my experience.
 
Abdiel Bull Berg said:
Now I will most definitely buy a 1.75 tube as soon as I got the extra cash for it. And I know what you mean, pumping gives instant, all though temporary results that are very pleasing to the eye and mind. Excited about seeing how much more I’ll expand in length with a smaller tube.
Click to expand...
Do you use water when you are pumping with the MityVac pumping system?
 
2x10 min LM3 stretches

Following by MVAC.
For the MVAC today I toyed around with some erect stretches/ just trying to pull outward under pressure and gain a little more.

I also found a way to gain some extra expansion, with the same pressure.

Example. You pump and say it goes to 6.5” hold it there for a little bit and then let off the air. You will lose expansion but not fully. Then before your penis starts to fully retract you pump back up to 10/12.

Since you’re starting the pump at 6.4” or so. You’ll climb to 6.7” under the same pressure you were at 6.6” just 10 seconds prior. Do this a couple times and you’ll go from 6.6-6.8” or so. Then maintain that pressure.

Then hopefully next 5 min set you start at 6.6 and hope to get to 6.9”. It worked for me.

I can hit 7” at the end of my set by pumping to 15 for the last 20/30 seconds. I am not ready for that kind of pressure but slowly adding some extra pressure and length doing so.

Really impressed that girth expansion in the 1.75” tube. I definitely fill it out inside the tube but somehow after wards with the blood flow I’m expanding from 5.25-5.3” or so. To about 5.5” even though I’m length pumping.

Really cool to see it still benefit both even though focus is length.

Post pump I was prob 6.75 x5.5”
 
squirt_inducer_man said:
That was like rat poison for me.
That is: Methylfenidatehydrocloride.
Click to expand...
Yepp, I know so I have gotten my Doc to ask a psychiatrist if I can get Attentin(dexamphetamine)instead while I wait for Aduvanz(lisdexamphetamine) to be available again.

My resting heart rate used to be like 64bpm on average while on Aduvanz/Vyvanse but now on Methylfenidate my resting heart rate is fucking 82bpm. It’s fucking crazy.
 
So I’ve found I definitely need a good lube to get expansion in the MVAC. I’m probably getting close to too much for the 1.75 tube. But not ready for the 2.00” yet as I want more length.

Without adequate lube I don’t expand in length as much as I do with lube. Since I’m getting stuck along the walls unless lubed up well.

Just putting thoughts on paper and sharing my experience in case anyone else reads this. We learn from each other.

Big fan of the thinner tube for length gains though.

SIM/ DLD- having seen this thread- do you have any advice or comments on how I should progress with the LM3.

I’ve started to do downward bundles. And the ones where SIM is on his knees pushing back behind him. Should those be my main focus now?

10min sets of that?
 
Did a few more days of training but haven’t logged in for it.

Took a few days off LM3 as I had some skin dryness. I think I may have kept a sleeve on too long and dried out the skin. Nothing crazy just needed to moisturize and heal it. I may have fallen asleep with it on and ripped it off when I woke up realizing.

No issues though.

Still hitting 6.8-7.0 in the pump
Depending on EQ and intensity. I generally increase the pressure towards the last min or so to try hit 7 if it’s not already there.

Excited to get back on LM tomorrow and I should be solid for another 20 sessions before the end of the year.
 
You must log in or register to reply here.
Back
Top