Progress thread Dave4139 D DIARY

Dave4139 said:
Pumped again last night. I’m getting absolutely too thick for the 1.75” tube. I pack it all the way up to the gland. It’s so tight it restricts my length growth in there now. I could only grow to 7.2 or so and before I could hit 7.4. It’s just getting too stuck no matter how much lube I use.

I travel home Friday and will have access to the length master again and my 2” wide tube.

After seeing TWIST crush SIMS program in going to switch back to LengthMaster 3 as main tool.

Thinking I’ll do 1 week of downward bundles. Then switch to exclusively BTCBS.

Haven’t had a good measurement recently but I’m about 6.9 length wise depending on day. Maybe 7” on a good day.

EG is 5.4.

Thinking my new goal is 7.5x 5.7 or so. I don’t want too much more girth as I already get teeth on BJs a little bit after pumping. So length master it is. Posting here for more accountability.
Click to expand...
So happy that brothers are starting to replicate the progress I got with my: LengthMaster 3 program.
The program I did was for sure effective, and I would be so happy if this is becoming the new standard of expected gains (related to time).

I hope this list of expected gains will be crushed by everyone in the future (at least the length gain progression):
kyomoto said:
3 months length 0.25"-0.5 "
6 months length 0.75"-1"
1 year length 1"-2"
3 months girth 0.25"
6 months girth 0.5"
1 year girth 0.75"-1"

Note this is incremental and the measurements for each month or year.
Click to expand...


I have listed the strategy I used to get my gains in: 📜 THE LIST.
Tell me if you guys want me to clarify how my program looked like (simplify it)?
 
squirt_inducer_man said:
So happy that brothers are starting to replicate the progress I got with my: LengthMaster 3 program.
The program I did was for sure effective, and I would be so happy if this is becoming the new standard of expected gains (related to time).

I hope this list of expected gains will be crushed by everyone in the future (at least the length gain progression):



I have listed the strategy I used to get my gains in: 📜 THE LIST.
Tell me if you guys want me to clarify how my program looked like (simplify it)?
Click to expand...

To simplify I feel like 2x10min in LM3. Focusing on DBS and BTCBS - as well as keeping it elongated through the day is the main bulk of your success?

Correct? I doubt I’ll be able to do 2 separate sessions a day- but if I can gain to 7.3-7.5” length I’ll be ecstatic.
 
Dave4139 said:
To simplify I feel like 2x10min in LengthMaster 3. Focusing on DBS and BTCBS - as well as keeping it elongated through the day is the main bulk of your success?

Correct? I doubt I’ll be able to do 2 separate sessions a day- but if I can gain to 7.3-7.5” length I’ll be ecstatic.
Click to expand...
If you can get into BTC-BS (Behind The Cheeks Bundled Stretches) you should only do that exercise (focus on maximize it progressively), because that is the exercise you will gain the most, especially if you're able to maximize your elongation after session. It has to to do with how your able to stretch your ligaments and inner penis.

Look at this picure below, and imagine you do BTC-BS.
You have more leverage becouse you're stretching behind yourself, and you can create much higher intensity in your inner penis and ligaments.

If you stretch in front of you/downward, the ligaments have a length limit and you will loose intensity (no leverage as well). Stretching behind you, and you will not loose intensity when stretching inner penis and ligaments.

full

"Click" on it to make the picture bigger.

In my experience 5 minutes holds made this possible (maximum elongation).
I have described how to increase the intensity in different ways before. You find resources about that in: 🔗 THE LIST.

I can also mention that I mostly did one session per day, but I tried to at least get in 2 sessions on one day of 3 days (3 days on 1 day rest).

So you can gain with one session. Focus on increasing the intensity progressively and bundle more and more. Do not be afraid of maximum your bundles as well.

Hope this helps, kind regards SIM.
 
Life has gotten in the way for few weeks. Back at it.
Pumped last night with 2” cylinder. Wildly I somehow filled it out and was touching the walls all the way up.
Maxed the girth in it and stretched to 7.3”length which I'm happy with given I haven’t been training.

I won’t have access to LM3 until Wednesday. So pumping it is.

anyone who’s interested in pumping. I’ve noticed through trial and error that allowing the ballsack to enter the pump as well- seems odd. But it also allows you to grow longer while pumping.
 
Dave4139 said:
Life has gotten in the way for few weeks. Back at it.
Pumped last night with 2” cylinder. Wildly I somehow filled it out and was touching the walls all the way up.
Maxed the girth in it and stretched to 7.3”length which I'm happy with given I haven’t been training.

I won’t have access to LM3 until Wednesday. So pumping it is.

anyone who’s interested in pumping. I’ve noticed through trial and error that allowing the ballsack to enter the pump as well- seems odd. But it also allows you to grow longer while pumping.
Click to expand...
You do what you can with what you got. Amazing progression brother!
You will get to lengthmastering when you can.

I'm interesting in pumping, but ball-sack pumping would never work for me in my Bathmate pumps, there is no room for them to fit.
Got really high vacuum today, I though my inner penis would rip out of it's socket. 😆
 
squirt_inducer_man said:
You do what you can with what you got. Amazing progression brother!
You will get to lengthmastering when you can.

I'm interesting in pumping, but ball-sack pumping would never work for me in my Bathmate pumps, there is no room for them to fit.
Got really high vacuum today, I though my inner penis would rip out of it's socket. 😆
Click to expand...
Yeah I was thick afterwards. Maxed out 2” pump which is 6.28” girth (while pumped clearly) so it def ain’t that normally.

the key to full package pumping is to slowly allow them to kind of make their way in there. It just sort of happened and I got longer. So best of both worlds.
 
TWIST&PULL said:
fantastic news my friend, I’m so pleased to have you back, lets crush it together!
Click to expand...
TWIST&PULL said:
fantastic news my friend, I’m so pleased to have you back, lets crush it together!
Click to expand...

twist. Question.
Have you started hitting your wife/gf cervix yet. I was smashing mine last week and she’s starting to say she doesn’t want me to get much much bigger bc of it.
Any ideas? Have you experienced that yet. ?

just trying to navigate this. As I’d like 7.5-8 but she is saying she will ask me to stop soon,

granted. She prob won’t know the difference in half inch or so.
 
squirt_inducer_man said:
⬆ Interesting ⬆ 🤔
Click to expand...
Yeah I don’t know what the play is just yet lol.

she said it was only once recently when I was going pretty hard and deep. Clearly you don’t have to go all the way to the base but still.

just uncharted territory for me so I’m learning as that wasn’t an issue before
 
Dave4139 said:
Yeah I don’t know what the play is just yet LOL.

she said it was only once recently when I was going pretty hard and deep. Clearly you don’t have to go all the way to the base but still.

just uncharted territory for me so I’m learning as that wasn’t an issue before
Click to expand...
Okay.

I will give feedback on this later on as well.
 
  • Like
Reactions: DLD
Dave4139 said:
Yeah I don’t know what the play is just yet lol.

she said it was only once recently when I was going pretty hard and deep. Clearly you don’t have to go all the way to the base but still.

just uncharted territory for me so I’m learning as that wasn’t an issue before
Click to expand...

Have you made any measurements yet?
 
Dave4139 said:
About an inch in length so far. Prob 1/2” girth.
Click to expand...

Excellent growth. You should have nothing but confidence behind you now and now you can to to the size you want to get to. You've already proven that you can make growth happen. So now it's time to take advantage of that and make additional growth happen
 
Dave4139 said:
twist. Question.
Have you started hitting your wife/gf cervix yet. I was smashing mine last week and she’s starting to say she doesn’t want me to get much much bigger bc of it.
Any ideas? Have you experienced that yet. ?

just trying to navigate this. As I’d like 7.5-8 but she is saying she will ask me to stop soon,

granted. She prob won’t know the difference in half inch or so.
Click to expand...
hey brother, I can’t help I’m afraid as cervix really aren’t an issue for me as I have a husband (probably should have said earlier)

I’m not sure if it’s a blessing or a curse, but I know a monster 9” would be well received.
 
TWIST&PULL said:
hey brother, I can’t help I’m afraid as cervix really aren’t an issue for me as I have a husband (probably should have said earlier)

I’m not sure if it’s a blessing or a curse, but I know a monster 9” would be well received.
Click to expand...
Interesting. You’ve certainly got a unique and different perspective than mine. Any issues arising from too much in the back end?
 
Dave4139 said:
Interesting. You’ve certainly got a unique and different perspective than mine. Any issues arising from too much in the back end?
Click to expand...
no issues I know for a fact he’s genuinely accommodated huge (that’s why I’m here) and we have 8.5 x 6 dildo, and loves it!
You guys think you have insecurities 😂😂

Dildos are great way to experiment and find you partners perfect fit.

The only issue I have with being huge is…
I love a spontaneous quickie and you lose that if your to big.
 
TWIST&PULL said:
hey brother, I can’t help I’m afraid as cervix really aren’t an issue for me as I have a husband (probably should have said earlier)

I’m not sure if it’s a blessing or a curse, but I know a monster 9” would be well received.
Click to expand...
Nine inches whether it's a man or a woman is very powerful
 
Dave4139 said:
Yesterday did 20min of LM3

followed by 2x5 in mity vac

LM3- was bundled at 1.25. First 10min all around. Last 10min focused on Downward bundles.

First LM3 in a while so took it moderate.
MV pump to 7.3” in length
Hoping I’ll pass 7.5” with some LM3 work
Click to expand...
You will just concentrate on doing those behind. The cheeks stretches bundled with Your length master
 
Just MityVac pumped after posting due to limited time before bed.

BPSFL prior was like 7.2 and flaccid girth was 4.5”.

After prob around 7.3 and 5.5.

Used the 2 inch MVAC tube which is big for me. I plan on doing more LM3 stretching this go around.

My BPEL is somewhere around 6.75-6.8ish. Not sure on EG right now. It’s above 5 but not sure.
I’d love to see the 7.25 range

Tomorrow I’ll work into LM3
 
Dave4139 said:
Just MityVac pumped after posting due to limited time before bed.

BPSFL prior was like 7.2 and flaccid girth was 4.5”.

After prob around 7.3 and 5.5.

Used the 2 inch MVAC tube which is big for me. I plan on doing more LM3 stretching this go around.

My BPEL is somewhere around 6.75-6.8ish. Not sure on EG right now. It’s above 5 but not sure.
I’d love to see the 7.25 range

Tomorrow I’ll work into LM3
Click to expand...
Awesome size to go for
 
DLD said:
Awesome size to go for
Click to expand...
Sir.
SIM
I’m having issues with MVAC. The pump itself works, but when I attached it to the white nozzle/ valve on top the tube. It won’t maintain pressure.

I’ve checked the pump by pumping air with just the line and it holds fine.

I’ve clicked the valve back and forth as well as checked for tightness.

I had this with another one and just bought a new pump. But this is a brand new pump same issue happened.
 
Last edited:
squirt_inducer_man said:
So happy that brothers are starting to replicate the progress I got with my: LengthMaster 3 program.
The program I did was for sure effective, and I would be so happy if this is becoming the new standard of expected gains (related to time).

I hope this list of expected gains will be crushed by everyone in the future (at least the length gain progression):



I have listed the strategy I used to get my gains in: 📜 THE LIST.
Tell me if you guys want me to clarify how my program looked like (simplify it)?
Click to expand...
Can you check the post above.

Having MVAC valve issues
 
Dave4139 said:
I knew there was a ln answer. Tried a search for mitt vac won’t work etc and didn’t find this.

Thanks SIM. I’ll toy with it later and watch the video when home.
Click to expand...
I created that thread for another user.
This is how I work, I create new content when it is needed.
 
squirt_inducer_man said:
I created that thread for another user.
This is how I work, I create new content when it is needed.
Click to expand...
Already tried both those remedies in the video. Currently soaking the valve in hot water just in case there’s lubricant caked inside it. I’ll check it after dinner later and see.

I’m having the same issue you describe in the video. The pump and gauge increases and has suction with just the hose. Once I attached it to the cylinder with the valve is where I don’t get any pressure build up.

So it’s clearly the valve. Hoping a hot water soak fixes. Will advise.
 
Dave4139 said:
Already tried both those remedies in the video. Currently soaking the valve in hot water just in case there’s lubricant caked inside it. I’ll check it after dinner later and see.

I’m having the same issue you describe in the video. The pump and gauge increases and has suction with just the hose. Once I attached it to the cylinder with the valve is where I don’t get any pressure build up.

So it’s clearly the valve. Hoping a hot water soak fixes. Will advise.
Click to expand...
Check the O-rings for damages.
If you connect and disconnect the fittings incorrectly the metal part can damage the O-rings on the male fitting.

Press and hold on the release during entire connection and disconnection will prevent damages to the O-rings.

View media item 2177
 
squirt_inducer_man said:
Check the O-rings for damages.
If you connect and disconnect the fittings incorrectly the metal part can damage the O-rings on the male fitting.

Press and hold on the release during entire connection and disconnection will prevent damages to the O-rings.

View media item 2177
Click to expand...
I have determined the valve is No good. I checked O rings. Tightness. And 2 separate air hoses.

Both air hoses hold pressure against skin. When cylinder attached it won’t pressurize.

I’m on a work trip but I’ve got LM3 with me- so looks like that’s the only thing on the menu this week.
 
Dave4139 said:
I have determined the valve is No good. I checked O rings. Tightness. And 2 separate air hoses.

Both air hoses hold pressure against skin. When cylinder attached it won’t pressurize.

I’m on a work trip but I’ve got LM3 with me- so looks like that’s the only thing on the menu this week.
Click to expand...
Lengthmaster is the best with length
 
All my cylinders have three spare sets on stand by. You never know what you do by accident, or just being a foolish modder (xd) Connective valves are very inexpensive and most cylinders are universal, depending on which region you're from. For the states, it's 1/4in ID (inner diameter threading), for Euro,I may be wrong but 6mm. I've seen odd ones at 7mm and 7.5mm as well.
 
LM3 session

Working back in to LM3. 10min sessions. Focused on bundled stretching. Warmed up and then mostly downward bundles and the opposite going up towards hip bones.

Sitting at like 1.25 rotations. Used to be able to 1.5 on some. Easing into it though. Not in a rush, consistency wins.
 
oldandlively said:
All my cylinders have three spare sets on stand by. You never know what you do by accident, or just being a foolish modder (xd) Connective valves are very inexpensive and most cylinders are universal, depending on which region you're from. For the states, it's 1/4in ID (inner diameter threading), for Euro,I may be wrong but 6mm. I've seen odd ones at 7mm and 7.5mm as well.
Click to expand...
I did some searching for valve fittings for the mity vac. On Reilly. Harbor freight. And Amazon.

Couldn’t find exactly what I need but found a million reverse osmosis shut off valves and all these brass 1/4 turn fittings haha.
 
Dave4139 said:
I did some searching for valve fittings for the mity vac. On Reilly. Harbor freight. And Amazon.

Couldn’t find exactly what I need but found a million reverse osmosis shut off valves and all these brass 1/4 turn fittings haha.
Click to expand...
Ah, you will not find those there. These are pump type quick disconnectors. Do reach out to MOS Shop for a quick valve replacement. I'll PM you to you can purchase spares after you properly measure them.
 
Dave4139 said:
I did some searching for valve fittings for the mity vac. On Reilly. Harbor freight. And Amazon.

Couldn’t find exactly what I need but found a million reverse osmosis shut off valves and all these brass 1/4 turn fittings haha.
Click to expand...
Looks like private Conversation is disabled. I'm not posting links, but use Google Images to look up these images and you'll find them.

Cut/assembly as needed.

1719977101237.png
1719977143155.png

Pre-cut and fitting assembly ready.
1719977335748.png
 
You must log in or register to reply here.
Back
Top