x20 x30

sergiomandez · Jul 6, 2018

hi all,

quick one! when do you move on from hydromax sizes, at the moment iam stretching 7 inches on X20 should i move onto X30? Note i get better expansion from X20!
iam doing 3x5 mintues with 1 minutue jelqs in betweeen and kegaling during expansion.

Big Schwanz Acht · Jul 6, 2018

I have no experience w/the X20, but it sounds to me like you're probably ready for the X40! My humble beginnings of 6.375"X 5.375" began in the X40, and once you mod it with The VacuVin, it makes the negative-space a non-issue

huge-girth · Jul 7, 2018

I suggest you take the advice given above, though the X40 will first appear very big in your eyes when you use it for the first time but it's best to upgrade to a bigger pump.

Eb75 · Jul 7, 2018

Go with the X40. If you are hitting 7 now your time will short in the X30.
But keep in mind the BM are girth devices.

sergiomandez · Jul 7, 2018

thanks guys , whats the vacu vin? i understand the hydromax is a girth device but im getting some length with it as well started 6 inches .

Big Schwanz Acht · Jul 7, 2018

https://www.amazon.com/Original-Vac...ocphy=9033359&hvtargid=pla-187725992183&psc=1

I've gained 1.75" in length from (mostly) my BM routine...Mike wrote an article regarding the penis growing more like a balloon than a rope which rang-true in my mind.

Just search 'wine mod' or 'vacuvin' within these threads and you'll see how easy it is to mod your BM (I went the more extreme route by removing the entire valve assemble, including the spring-stopper and then stuck the vacuvin valve in the void...perfect fit and at least triple the power

)

arkailija · Jul 7, 2018

Bumping my own thread; http://www.mattersofsize.com/forum/penis-enlargement-pumping-forum/89505-bathmate-and-penomet-the-vacu-vin-modification-clarification.html

huge-girth · Jul 8, 2018

arkailija;763550 said:
Bumping my own thread; http://www.mattersofsize.com/forum/penis-enlargement-pumping-forum/89505-bathmate-and-penomet-the-vacu-vin-modification-clarification.html

You did great by bumping this thread of yours. I've never seen it before. I'm going to take a look now.

sergiomandez · Jul 8, 2018

arkailija which method is best for the hydromax modification , the "o" ring or the cork?

arkailija · Jul 8, 2018

The O-ring is easier and doesn't require disassembly. The cork is more rigid but does require more effort. If you're having issues with the valve then removing it and replacing it with the cork is a solid fix. But if the valve assembly is working fine I'd stick to the O-ring method as it wouldn't undo the warranty.

huge-girth · Jul 9, 2018

arkailija;763593 said:
The O-ring is easier and doesn't require disassembly. The cork is more rigid but does require more effort. If you're having issues with the valve then removing it and replacing it with the cork is a solid fix. But if the valve assembly is working fine I'd stick to the O-ring method as it wouldn't undo the warranty.

Will this same setup work with the X50? I mean is it possible to use this same setup with the X50?

arkailija · Jul 9, 2018

huge-girth;763606 said:
Will this same setup work with the X50? I mean is it possible to use this same setup with the X50?

To my knowledge, yes. Possibly a bigger O-ring might be needed, but I think the valves are quite similar between the models. And if the valve is the same dimension, then there's is no problem with the cork method either.

DLD · Jul 9, 2018

arkailija;763618 said:
To my knowledge, yes. Possibly a bigger O-ring might be needed, but I think the valves are quite similar between the models. And if the valve is the same dimension, then there's is no problem with the cork method either.

The O Rings come is a multipack with various size, there should be one to fit all valves.

Big Schwanz Acht · Jul 9, 2018

all the X-series valves are identical, so whichever VV mod you choose, it should translate between the various models

arkailija · Jul 9, 2018

doublelongdaddy;763663 said:
The O Rings come is a multipack with various size, there should be one to fit all valves.

Ah yes, that is a very good pointer; in my guide I've used a cockring which happens to be O-ring type. Some width and thickness would be a good thing, I haven't tried my pumps with a regular O-ring, although I have a case full of them.

Edit; BSA with a PSA!

Thanks man.

huge-girth · Jul 10, 2018

arkailija;763618 said:
To my knowledge, yes. Possibly a bigger O-ring might be needed, but I think the valves are quite similar between the models. And if the valve is the same dimension, then there's is no problem with the cork method either.

Thanks for the suggestion.

DLD · Jul 10, 2018

Big Schwanz Acht;763675 said:
all the X-series valves are identical, so whichever VV mod you choose, it should translate between the various models

That is what I thought then I started hearing that the rings were not fitting. Thanks for the clarification.

Beertaxi · Jul 11, 2018

What worked for me with the Vacu-vin mod was using a skin cone. I didn't have to fiddle with the valve at all.

https://tlctugger.com/product/bathmate-conversion-cone/

sergiomandez · Jul 12, 2018

arkailija when using the "o" ring method on the hydromax , before pumping with vacu vin do you close the valve on the hydromax or leave it open?
And how much pumping is suggested?

Big Schwanz Acht · Jul 12, 2018

leave the valve open and listen to your body when pumping...the VV is very, very powerful

x20 x30

0

@Big Schwanz Acht

Moderator

0

0

@Big Schwanz Acht

@CUCKilija

Moderator

0

@CUCKilija

Moderator

@CUCKilija

doublelongdaddy

@Big Schwanz Acht

@CUCKilija

Moderator

doublelongdaddy

0

0

@Big Schwanz Acht

Similar threads