- Joined
- Aug 20, 2017
- Messages
- 163
Is fluid buildup at the top of the tip a big deal? I take the ss off every hour and it usually goes away in 30 minutes. Just wondering if this has any long term effects with sensitivity or blood flow to the tip.
Troubleshooting the SiliStretcher Vacuum Penis Stretcher and Hanger Video
- Thread starter Lightning
- Start date
- Joined
- Jun 3, 2003
- Messages
- 20,066
Its a big deal at the tip because it can form a blister, and they are said to hurt like a biatch on the head.
Never had one there, dont want one there. If you can, please wear the silicap when using anything vacuum attaching itself to the penis. You could also wear a condom, that will give some padding to the glans.
Never had one there, dont want one there. If you can, please wear the silicap when using anything vacuum attaching itself to the penis. You could also wear a condom, that will give some padding to the glans.
- Joined
- Aug 20, 2017
- Messages
- 163
It doesnt hurt or anything and I'm using the silicap, is this the result of too much vacuum ?
- Joined
- Jun 3, 2003
- Messages
- 126,803
Being a Guinea pig is where all the action is. If you’re able to prove something new through risk that you take and it turns out to be profitable, you’ve done a great thing. I have made myself a guinea pig many times and it’s turned out to be positive most of the time.
- Joined
- Jun 3, 2003
- Messages
- 4,176
When we ship the SiliStretchers, we ship them with the regular size 20mm x 85mm SiliSleev attached and 2.5lbs of weight. This set-up is for starting up and is not intended for heavy weight use. We do this so people don't hurt themselves going overboard the first time using. Keep in mind, the SiliStretcher - All Day Penis Vacuum Stretcher and Weight Hanger is more intended to be used as an ADS and moderate hanger. The idea is to stretch moderately for long periods, not to hang heavy for 10 minutes.
If you are looking to hang real heavy weight you can get our Bundle Chamber which people have hung up to 55lbs with.
For advanced users looking to hang heavier weight and higher tensions with the SIliStretcher, here is what you do.
Remove the standard SiliSleev that came attached to the SiliStretcher.
Attach the long 20mm x 145mm SIliSleev to The SiliStretcher with the thin end of the SiliSleev attached to the SiliStretcher and the thicker end towards your pelvic. The thicker end is less pliable due to it having a thicker band.
With the piston fully extracted, roll the SiliSleev over the SiliStretcher
Unroll SiliSleeve over the penis with the thick end of the SiliSleev towards the pelvic.
Fold the SiliSleev back over itself to create a more intense grip
Turn the Piston knob a half turn for 5 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.
You can also put the SIliSleev on your penis first and then attach the SiliSleev to the SiliStretcher if easier for you. Practice makes perfect.
I will post this in the main thread as well.
If you are looking to hang real heavy weight you can get our Bundle Chamber which people have hung up to 55lbs with.
For advanced users looking to hang heavier weight and higher tensions with the SIliStretcher, here is what you do.
Remove the standard SiliSleev that came attached to the SiliStretcher.
Attach the long 20mm x 145mm SIliSleev to The SiliStretcher with the thin end of the SiliSleev attached to the SiliStretcher and the thicker end towards your pelvic. The thicker end is less pliable due to it having a thicker band.
With the piston fully extracted, roll the SiliSleev over the SiliStretcher
Unroll SiliSleeve over the penis with the thick end of the SiliSleev towards the pelvic.
Fold the SiliSleev back over itself to create a more intense grip
Turn the Piston knob a half turn for 5 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.
You can also put the SIliSleev on your penis first and then attach the SiliSleev to the SiliStretcher if easier for you. Practice makes perfect.
I will post this in the main thread as well.
Last edited:
I have also gotten fluid at the tip even with a 30 minute session.
I am using the silicap as well with 2 half turns.
Maybe it is too much pressure.
I am trying it both with glans starting further in the cup with piston pulled in some when applying and then with suggested technique with piston just being in a bit.
Not sure if it is being caused by silicap slipping forward just a bit.
Also, I need to try it with the longer sleeves as I have only been using the short sleeves with it.
Are there any plans on making a glans cap with a thick part on the opening similar to the silisleeves? Maybe this would help for those that might be having slipping issues.
Or maybe I just need some of the gripping powder.
I am using the silicap as well with 2 half turns.
Maybe it is too much pressure.
I am trying it both with glans starting further in the cup with piston pulled in some when applying and then with suggested technique with piston just being in a bit.
Not sure if it is being caused by silicap slipping forward just a bit.
Also, I need to try it with the longer sleeves as I have only been using the short sleeves with it.
Are there any plans on making a glans cap with a thick part on the opening similar to the silisleeves? Maybe this would help for those that might be having slipping issues.
Or maybe I just need some of the gripping powder.
- Joined
- Jul 30, 2018
- Messages
- 91
I was getting slippage also with the glans cap being pulled up a bit too..You could try without the cap and tape your glans up with Nexcare Absolute Waterproof Tape..Just tape the same area that the cap covers.I used this tape when I hung with my VacHanger 3 and it works dam
good..
good..
- Joined
- Jun 3, 2003
- Messages
- 4,176
MOSGrip will help allot
- Joined
- Jun 13, 2017
- Messages
- 816
- Joined
- Jun 13, 2017
- Messages
- 816
Another idea is to try using MOS Silirings...I wonder if someone with a ring can try this and report back here the results?
You would place the ring first and then ring over the silisleeve after vacuum has been activated.
- Joined
- Oct 15, 2011
- Messages
- 141
Definitely makes a big difference in comfort & grip. Only way I can hang comfortably without the glan cap.
@Lightning you mentioned
“Turn the Piston knob a half turn for 5 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.”
So for ADS mode should it just be half turn or less?
I’m going to try only half turn since I’ve been getting some fluid at tip of glans.
“Turn the Piston knob a half turn for 5 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.”
So for ADS mode should it just be half turn or less?
I’m going to try only half turn since I’ve been getting some fluid at tip of glans.
- Joined
- Jun 3, 2003
- Messages
- 126,803
Hey, it’s your turn to be the guinea pig I was the guinea pig two days ago LOL
- Joined
- Jun 3, 2003
- Messages
- 126,803
Get yourself some my brother they are incredible and they’re so inexpensive. I think they are the most comfortable and safest rings available?
- Joined
- Jun 3, 2003
- Messages
- 126,803
Some good new data here! No need for a Guinea pig LOL 
mattersofsize.com
All day siliring
Today i wore the c ring about 12 hrs. It was basically an accident, i meant to wear for two hours and just forgot to take it off, and after several hours when i remembered i thought why not see how long i can go. The downside is i have a red ring at my base and some dry skin, so I’m not wearing...
mattersofsize.com
- Joined
- Jun 13, 2017
- Messages
- 816
@Lightning @DLD
Okay...Here is the data/feedback we have learned thus far:
Okay...Here is the data/feedback we have learned thus far:
- Some men have oily skin so the stretcher will not hold if one is wearing the cap.
- Solution: Wear the stretcher without the cap and make sure skin is oil-free before application. You can wipe off natural oils for your penis with a tissue or cloth.
- I found out that suction can be lost even if no pinholes in the sleeve.
- Solution: Make sure the penis shaft is free from oil, sweat, lube, and hairs...wipe off both the sleeve and your penis before applying.
- Solution #2: Make sure not to have too much tension or it will slip off.
- Solution #3: Squeeze all the air out of the sleeve with the penis inside and also pull any excess skin from under the sleeve to make it taut. After checking and squeeze, I would squeeze shut the sleeve at the bottom of the opening and vacuum in the penis. This helped me keep a vacuum seal.
- Solution #4: Waiting to be tested...Self-Adhesive tape to tape around the sleeve and penis to create a stronger seal.
- Can you sleep with the SiliStretcher?
- No...confirmed by DLD HERE.
- Can you sleep with the SiliSleeve?
- My personal experience...Yes, make sure to pull out all the excess skin at the base to allow the skin to hang freely to prevent pinching during sleep.
Last edited:
- Joined
- Jun 3, 2003
- Messages
- 126,803
Awesome conclusions and we both came to the same ones so I’m very confident in this post and I suggest people take this as sound advice. There is plenty of hours in the day to get your stretching in at night the stretch should be passive and as gentle as possible, holding you to flaccid stretched length. The SiliSleave is perfect for overnight use.
Similar threads
