Troubleshooting the SiliStretcher Vacuum Penis Stretcher and Hanger Video

Is fluid buildup at the top of the tip a big deal? I take the ss off every hour and it usually goes away in 30 minutes. Just wondering if this has any long term effects with sensitivity or blood flow to the tip.
 
Its a big deal at the tip because it can form a blister, and they are said to hurt like a biatch on the head.
Never had one there, dont want one there. If you can, please wear the silicap when using anything vacuum attaching itself to the penis. You could also wear a condom, that will give some padding to the glans.
 
  • Like
Reactions: DLD
Its a big deal at the tip because it can form a blister, and they are said to hurt like a biatch on the head.
Never had one there, dont want one there. If you can, please wear the silicap when using anything vacuum attaching itself to the penis. You could also wear a condom, that will give some padding to the glans.

It doesnt hurt or anything and I'm using the silicap, is this the result of too much vacuum ?
 
  • Like
Reactions: DLD
Gotcha...Glad to be a guinea pig ninja so we can perfect this for others who may run into the same issues.

Being a Guinea pig is where all the action is. If you’re able to prove something new through risk that you take and it turns out to be profitable, you’ve done a great thing. I have made myself a guinea pig many times and it’s turned out to be positive most of the time.
 
When we ship the SiliStretchers, we ship them with the regular size 20mm x 85mm SiliSleev attached and 2.5lbs of weight. This set-up is for starting up and is not intended for heavy weight use. We do this so people don't hurt themselves going overboard the first time using. Keep in mind, the SiliStretcher is more intended to be used as an ADS and moderate hanger. The idea is to stretch moderately for long periods, not to hang heavy for 10 minutes.

If you are looking to hang real heavy weight you can get our Bundle Chamber which people have hung up to 55lbs with.

For advanced users looking to hang heavier weight and higher tensions with the SIliStretcher, here is what you do.

Remove the standard SiliSleev that came attached to the SiliStretcher.


20190321_183239.jpg

Attach the long 20mm x 145mm SIliSleev to The SiliStretcher with the thin end of the SiliSleev attached to the SiliStretcher and the thicker end towards your pelvic. The thicker end is less pliable due to it having a thicker band.



20190321_183338.jpg

With the piston fully extracted, roll the SiliSleev over the SiliStretcher



20190321_183704.jpg

Unroll SiliSleeve over the penis with the thick end of the SiliSleev towards the pelvic.



20190321_184105.jpg

Fold the SiliSleev back over itself to create a more intense grip



20190321_184211.jpg

Turn the Piston knob a half turn for 5 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.

You can also put the SIliSleev on your penis first and then attach the SiliSleev to the SiliStretcher if easier for you. Practice makes perfect.

I will post this in the main thread as well.
 
Last edited:
I have also gotten fluid at the tip even with a 30 minute session.
I am using the silicap as well with 2 half turns.
Maybe it is too much pressure.

I am trying it both with glans starting further in the cup with piston pulled in some when applying and then with suggested technique with piston just being in a bit.

Not sure if it is being caused by silicap slipping forward just a bit.
Also, I need to try it with the longer sleeves as I have only been using the short sleeves with it.

Are there any plans on making a glans cap with a thick part on the opening similar to the silisleeves? Maybe this would help for those that might be having slipping issues.
Or maybe I just need some of the gripping powder.
 
I was getting slippage also with the glans cap being pulled up a bit too..You could try without the cap and tape your glans up with Nexcare Absolute Waterproof Tape..Just tape the same area that the cap covers.I used this tape when I hung with my VacHanger 3 and it works dam81287e5f-c974-41ff-bf13-f5d01c93c631._CR0,0,300,400_PT0_SX300__.jpg good..
 
You are going to get head expansion to some point if you have10 in-Hg of vacuum focused on the glans for an hour straight. Tape is great idea as well. We also carry a black stretch tape In the shop for wrapping.
 
I was getting slippage also with the glans cap being pulled up a bit too..You could try without the cap and tape your glans up with Nexcare Absolute Waterproof Tape..Just tape the same area that the cap covers.I used this tape when I hung with my VacHanger 3 and it works damView attachment 1821271 good..


I discussed this idea with @StonerWithABoner as well. Great minds think alike. :)
 
You are going to get head expansion to some point if you have10 in-Hg of vacuum focused on the glans for an hour straight. Tape is great idea as well. We also carry a black stretch tape In the shop for wrapping.
I was getting slippage also with the glans cap being pulled up a bit too..You could try without the cap and tape your glans up with Nexcare Absolute Waterproof Tape..Just tape the same area that the cap covers.I used this tape when I hung with my VacHanger 3 and it works damView attachment 1821271 good..

Another idea is to try using MOS Silirings...I wonder if someone with a ring can try this and report back here the results?

You would place the ring first and then ring over the silisleeve after vacuum has been activated.
 
When we ship the SiliStretchers, we ship them with the regular size 20mm x 85mm SiliSleev attached and 2.5lbs of weight. This set-up is for starting up and is not intended for heavy weight use. We do this so people don't hurt themselves going overboard the first time using. Keep in mind, the SiliStretcher is more intended to be used as an ADS and moderate hanger. The idea is to stretch moderately for long periods, not to hang heavy for 10 minutes.

If you are looking to hang real heavy weight you can get our Bundle Chamber which people have hung up to 55lbs with.

For advanced users looking to hang heavier weight and higher tensions with the SIliStretcher, here is what you do.

Remove the standard SiliSleev that came attached to the SiliStretcher.


View attachment 1821249

Attach the long 20mm x 145mm SIliSleev to The SiliStretcher with the thin end of the SiliSleev attached to the SiliStretcher and the thicker end towards your pelvic. The thicker end is less pliable due to it having a thicker band.



View attachment 1821250

With the piston fully extracted, roll the SiliSleev over the SiliStretcher



View attachment 1821251

Unroll SiliSleeve over the penis with the thick end of the SiliSleev towards the pelvic.



View attachment 1821252

Fold the SiliSleev back over itself to create a more intense grip



View attachment 1821254

Turn the Piston knob a half turn for 5 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.

You can also put the SIliSleev on your penis first and then attach the SiliSleev to the SiliStretcher if easier for you. Practice makes perfect.

I will post this in the main thread as well.
Definitely makes a big difference in comfort & grip. Only way I can hang comfortably without the glan cap.
 
@Lightning you mentioned
“Turn the Piston knob a half turn for 5 in.-Hg of vacuum (capable to hang 5lbs) or a full turn for 10 in.-Hg. for heavier weight and tension.”

So for ADS mode should it just be half turn or less?

I’m going to try only half turn since I’ve been getting some fluid at tip of glans.
 
Another idea is to try using MOS Silirings...I wonder if someone with a ring can try this and report back here the results?

You would place the ring first and then ring over the silisleeve after vacuum has been activated.

Hey, it’s your turn to be the guinea pig I was the guinea pig two days ago LOL
 
No Siliring to try.

Get yourself some my brother they are incredible and they’re so inexpensive. I think they are the most comfortable and safest rings available?
 
Get yourself some my brother they are incredible and they’re so inexpensive. I think they are the most comfortable and safest rings available?

I have like five different experiments going right now so I don’t know how many more I want to take on LOL we need more than two guinea pigs....LOL
 
Some good new data here! No need for a Guinea pig LOL (clap)

 
@Lightning @DLD

Okay...Here is the data/feedback we have learned thus far:
  1. Some men have oily skin so the stretcher will not hold if one is wearing the cap.
    1. Solution: Wear the stretcher without the cap and make sure skin is oil-free before application. You can wipe off natural oils for your penis with a tissue or cloth.
  2. I found out that suction can be lost even if no pinholes in the sleeve.
    1. Solution: Make sure the penis shaft is free from oil, sweat, lube, and hairs...wipe off both the sleeve and your penis before applying.
    2. Solution #2: Make sure not to have too much tension or it will slip off.
    3. Solution #3: Squeeze all the air out of the sleeve with the penis inside and also pull any excess skin from under the sleeve to make it taut. After checking and squeeze, I would squeeze shut the sleeve at the bottom of the opening and vacuum in the penis. This helped me keep a vacuum seal.
    4. Solution #4: Waiting to be tested...Self-Adhesive tape to tape around the sleeve and penis to create a stronger seal.
  3. Can you sleep with the SiliStretcher?
    1. No...confirmed by DLD HERE.
  4. Can you sleep with the SiliSleeve?
    1. My personal experience...Yes, make sure to pull out all the excess skin at the base to allow the skin to hang freely to prevent pinching during sleep.
 
Last edited:
  • Like
Reactions: DLD
@Lightning @DLD

Okay...Here is the data/feedback we have learned thus far:
  1. Some men have oily skin so the stretcher will not hold if one is wearing the cap.
    1. Solution: Wear the stretcher without the cap and make sure skin is oil-free before application. You can wipe off natural oils for your penis with a tissue or cloth.
  2. I found out that suction can be lost even if no pinholes in the sleeve.
    1. Solution: Make sure the penis shaft is free from oil, sweat, lube, and hairs...wipe off both the sleeve and your penis before applying.
    2. Solution #2: Make sure not to have too much tension or it will slip off.
    3. Solution #3: Squeeze all the air out of the sleeve with the penis inside and also pull any excess skin from under the sleeve to make it taut. After checking and squeeze, I would squeeze shut the sleeve at the bottom of the opening and vacuum in the penis. This helped me keep a vacuum seal.
    4. Solution #4: Waiting to be tested...Self-Adhesive tape to tape around the sleeve and penis to create a stronger seal.
  3. Can you sleep with the SiliStretcher?
    1. No...confirmed by DLD HERE.
  4. Can you sleep with the SiliSleeve?
    1. My personal experience...Yes, make sure to pull out all the excess skin at the base to allow the skin to hang freely to prevent pinching during sleep.

Awesome conclusions and we both came to the same ones so I’m very confident in this post and I suggest people take this as sound advice. There is plenty of hours in the day to get your stretching in at night the stretch should be passive and as gentle as possible, holding you to flaccid stretched length. The SiliSleave is perfect for overnight use.
 
Back
Top Bottom