I tried the grip amd everyrhing its still slipping. Am i doing something wrong? I didnt receive the sili cap as it was said to be shipped a week later. The video doesn't help it just goes over the basics. Need help feel like i wasted money for no reason
Slilistretcher keeps slipping frustrated
- Thread starter dxmklcd
- Start date
Check the sleeves for any possible pinholes. You are shaved, right?
Lightning made a good manual:
mattersofsize.com
As in the manual, turn the knob so that the piston is about halfway down the chamber. One turn can produce plenty of suction.
With pretty much any tool in the world there's a learning curve. Don't give up!
Lightning made a good manual:
SiliStretcher User Manual
Inside your SiliStretcher package you will find the following contents: SiliStretcher(s) of choice Blue SiliPad and gel pads Blue SiliSleevs & SiliCap ADS (All Day Stretcher) Belt with clip Hanging arbor and spring clip Weight plates MOSGrip gripping powder Silicone lube for maintenance...
mattersofsize.com
As in the manual, turn the knob so that the piston is about halfway down the chamber. One turn can produce plenty of suction.
With pretty much any tool in the world there's a learning curve. Don't give up!
- Joined
- Aug 14, 2018
- Messages
- 366
@Haursen was having some trouble with it as well. He mentioned that ditching the cap was actually better, (so don't bother when the cap arrives), and that a shaved, oil free shaft was key.
He also mentioned some method he'd found for wrapping the silistretcher, in this post. If you continue to struggle with this, you could ask him about it!
He also mentioned some method he'd found for wrapping the silistretcher, in this post. If you continue to struggle with this, you could ask him about it!
- Joined
- Jun 3, 2003
- Messages
- 4,176
Email your name and order number to sales@mattersofsize.com and we will get a new sleeve out to you right away.
Remember, there are extra sleeves that were included to use in the meantime
which ones because the thicker one is stretched out and slips off as well, there are two longer ones how would i use those on the silistretcher, and thank you i will email you right now
- Joined
- Jun 3, 2003
- Messages
- 4,176
Use the longer sleeves like this. There are new SiliSleev Duros coming in the next couple weeks. They are for hanging heavier weight and we will be sending a complimentary one to everyone that has a silistretcher if shipping is paid.
mattersofsize.com
Setting the SiliStretcher for heavier weight and tension
NOTE: This post does not apply to the new SiliStretcher2 with the DuroSleevs. This is only for the SiliStretcher 1 with the original SiliSleevs We ship the SiliStretcher 1 with the regular size 20mm x 85mm SiliSleev attached and 2.5lbs of weight. This set-up is for starting up and is not...
mattersofsize.com
Last edited:
- Joined
- Jun 3, 2003
- Messages
- 124,549
Heavier weight needs more preparation and We are working on a sleeve that will handle heavier weight.
- Joined
- Jun 3, 2003
- Messages
- 20,066
Place the longer sleeve on, try that. Attach the thicker part to the silisleeve, then roll the rest like a condom, and stretch it so you can gently rest over the entrance.
If you have a silipad, please use that. It makes a difference, if not, once you have the above ready, have the piston retracted, so the plate is halfway inside the chamber ... place your penis inside, if your uncut, it can help if you pull the skin back beforehand.
Once the penis head is inside, with one hand you slowly allow the rolled up sleeve to drop down into the penis ... now slowly unroll it down the shaft. It should be neat.
This next part is simple .. just turn the piston once, or half a turn as many do. I always do it one full turn, but pay attention to the area of the sleeve where the entrance is at ... you do not want any sleeve to start distorting, and being sucked in, this is something that can happen here, it looks like its being distorted, and in time leads to holes.
So, dont overdo the piston, and once your done, this is giving you a solid grip.
If you have a silipad, please use that. It makes a difference, if not, once you have the above ready, have the piston retracted, so the plate is halfway inside the chamber ... place your penis inside, if your uncut, it can help if you pull the skin back beforehand.
Once the penis head is inside, with one hand you slowly allow the rolled up sleeve to drop down into the penis ... now slowly unroll it down the shaft. It should be neat.
This next part is simple .. just turn the piston once, or half a turn as many do. I always do it one full turn, but pay attention to the area of the sleeve where the entrance is at ... you do not want any sleeve to start distorting, and being sucked in, this is something that can happen here, it looks like its being distorted, and in time leads to holes.
So, dont overdo the piston, and once your done, this is giving you a solid grip.
Maybe try this. I experience great grip with this configuration.
Wear 2 sleeves with Silistretcher and the grip is tremendous.
I first put on Silicap then a Silisleeve over my penis.
Then I apply the Silistretcher as normal with a second sleeve.
I have used both the short small sleeve then the short wider sleeve over it or the short wide sleeve and the short wide sleeve over that.
The grip of these two sleeves is powerful.
When you tug on the Silistretcher ring you can feel the pull.
Minimal fluid using the contoured Silipad .
I noticed a line across my glans, but I think it is just the pressure of the sleeve over the top of it.
I wear it only for an hour then check things out before reapplying.
Oh and when you try this the sleeves will stick to each other, so to take them off pull Silisleeve a bit to remove Silistretcher and roll the top sleeve off first.
Then roll the second sleeve towards your body, so you can take off the Silicap first.
Last roll off the bottom Silisleeve .
Let me know what you think.
Wear 2 sleeves with Silistretcher and the grip is tremendous.
I first put on Silicap then a Silisleeve over my penis.
Then I apply the Silistretcher as normal with a second sleeve.
I have used both the short small sleeve then the short wider sleeve over it or the short wide sleeve and the short wide sleeve over that.
The grip of these two sleeves is powerful.
When you tug on the Silistretcher ring you can feel the pull.
Minimal fluid using the contoured Silipad .
I noticed a line across my glans, but I think it is just the pressure of the sleeve over the top of it.
I wear it only for an hour then check things out before reapplying.
Oh and when you try this the sleeves will stick to each other, so to take them off pull Silisleeve a bit to remove Silistretcher and roll the top sleeve off first.
Then roll the second sleeve towards your body, so you can take off the Silicap first.
Last roll off the bottom Silisleeve .
Let me know what you think.
So put yourself in this configuration first, then apply the Silistretcher as normal.
You should not need more than 1/2 turn on the knob. I use 1/4 to 1/2 turn.
I took a screenshot from Lightning.
Last edited:
- Joined
- Jun 3, 2003
- Messages
- 20,066
Very smart 
Were you able to get a good seal and fix the issue you were having?
If so, how did you fix it?
Last edited:
The silicap came in the mail so i put that on then put the regular sleeve over it then twisted the knob halfway. Got a hood hanging session like 25 minutes but my glans were kind of puffy. Hopefully nothing too serious..
Similar threads
