- Joined
- Jan 15, 2014
- Messages
- 18
im thinking I was just scammed out of 100 $. my "ring of power has no voltage. with readings of .00000 voltz I am convinced this is a big scam. do not buy!!!!!
ring of power no voltage
- Thread starter thechocolate
- Start date
- Joined
- Jan 15, 2014
- Messages
- 18
used three votl meters and one was with a very low margin of error. im getting 0 across the board. im so glad I saved up 100 $ from one of my 2 minimum wage jobs for this piece of shit. beyond pissed
- Joined
- Feb 5, 2012
- Messages
- 224
thechocolate;575285 said:
What type of volt meters are you using? The voltage from the ROP gives you .8 volts at the highest, so if your meters can't do anything under 1 volt then it's going to show up as 0s across the screen.
Also you should be wearing the ROP while you're measuring the voltage, it needs to complete the circuit to get voltage.
- Joined
- Mar 31, 2005
- Messages
- 476
What TH said, .. it has to be on and getting some moisture to connect and flow voltage.
The concept definitely works when done right, I've built them before with high purity zinc and copper pieces from McMaster Carr and surgical tubing from slingshot repair kits (lets see if this web pic will link: CLICK ) <-- Like that. The voltage is so noticeable at first as to be irritating until you get used to it.
If your materials are correct, and it's not too dry, it'll work. You can add moisture under the contact areas, right before putting it on, with any number of oils or lotions but watch out if your model has surgical tubing because most of the lotion products are going to accelerate the aging of the tubing until it degrades and falls apart.
My suggestion of how to make sure you've got proper moisturization of the area (without hurting the tubing) is a product called Na-PCA, it's a humectant salt that draws/absorbs water out of the air. -- Don't get the one with added Aloe (even though it'd aid healing if you feel like the RoP is abrading or burning you a bit). Aloe is a sulfur compound .. silicone tubing doesn't play well with sulfur.
Also .. the rods have to be (I'd say 'clean', but what I really mean to convey is) -Shiny-. They'll oxidize from just sitting around, much less after a few days of being worn, and eventually that will make them quit working. All you have to do though is occasionally knock off the surface layer of oxide with some sandpaper and then they're like new again. If yours was made some time ago and sat around a long time before being shipped to you, it might need sanding even though it's otherwise new.
Also obviously ... the rods need to make contact with your skin, so there needs to be enough Manscaping of the contact spots to allow them to sit against your skin rather than on top of hair.
The concept definitely works when done right, I've built them before with high purity zinc and copper pieces from McMaster Carr and surgical tubing from slingshot repair kits (lets see if this web pic will link: CLICK ) <-- Like that. The voltage is so noticeable at first as to be irritating until you get used to it.
If your materials are correct, and it's not too dry, it'll work. You can add moisture under the contact areas, right before putting it on, with any number of oils or lotions but watch out if your model has surgical tubing because most of the lotion products are going to accelerate the aging of the tubing until it degrades and falls apart.
My suggestion of how to make sure you've got proper moisturization of the area (without hurting the tubing) is a product called Na-PCA, it's a humectant salt that draws/absorbs water out of the air. -- Don't get the one with added Aloe (even though it'd aid healing if you feel like the RoP is abrading or burning you a bit). Aloe is a sulfur compound .. silicone tubing doesn't play well with sulfur.
Also .. the rods have to be (I'd say 'clean', but what I really mean to convey is) -Shiny-. They'll oxidize from just sitting around, much less after a few days of being worn, and eventually that will make them quit working. All you have to do though is occasionally knock off the surface layer of oxide with some sandpaper and then they're like new again. If yours was made some time ago and sat around a long time before being shipped to you, it might need sanding even though it's otherwise new.
Also obviously ... the rods need to make contact with your skin, so there needs to be enough Manscaping of the contact spots to allow them to sit against your skin rather than on top of hair.
- Joined
- Jan 15, 2014
- Messages
- 18
someone delete this it says .77 volts when im wearing it. what is the optimum voltage for testosterone increase?
- Joined
- Mar 31, 2005
- Messages
- 476
Just flop your junk, balls and all, into it and wear it around..
Usual preference is the white metal (zinc) goes at the bottom under your balls and the orangey (copper) metal goes at the top on top of your shaft. When you get in place against your skin the galvanic difference between those metal rods makes them become electrodes .. which swap their normal electronegativities and begin flowing zinc ions between each other .. thru your sac, around your balls, and thru the bottom of your shaft.
You should definitely feel that something's going on ... to me it could be kindof irritating (from constantly being distracted from noticing it). And as anecdotal evidence, after a day or two of wearing one around I'd say it's at least 50% of 'driving home from Squat Day' .. if you get that analogy. (testosterone up so much that it'd be a r.e.a.l.l.y stupid time for somebody to F with you)
After a while, weeks if you're lucky, the tubing will degrade at the ends and fail. You can fix this with easily available parts. Before that ever occurs the electrodes will have oxided several times .. that makes them stop working. It's simple to fix this like new by sanding them a bit until they're shiny again.
Do they flow electricity? Yes.
Do they raise testosterone? My opinion Yes.
Do they help with Penis Enlargement? 'Maybe'*. Stopped wearing mine about the third time the tubing failed. Just exceeded my attention span. Also too much of one hormone will usually cause unwanted aromatization byproducts .. in this case such as estrogen and DHT. One can make you grow 'bitch tits' and the other can make you go bald .. Just something to look out for in case you notice it.
*There's no known mechanism for a simple flux of zinc ions to cause the re-expression of genes which stop functioning during one's teens (re: making the penis GROW larger on its own), ..
*But .. zinc is definitely involved in the production of collagens/elastins and this could make you heal faster between Penis Enlargement sessions. Notable that process is said to work best if the zinc is already present at the time of the tissue trauma .. so if you can't wear one a lot then wearing the RoP before a session could be more helpful than afterwards, but that's ncbi info .. not from my direct experience.
Usual preference is the white metal (zinc) goes at the bottom under your balls and the orangey (copper) metal goes at the top on top of your shaft. When you get in place against your skin the galvanic difference between those metal rods makes them become electrodes .. which swap their normal electronegativities and begin flowing zinc ions between each other .. thru your sac, around your balls, and thru the bottom of your shaft.
You should definitely feel that something's going on ... to me it could be kindof irritating (from constantly being distracted from noticing it). And as anecdotal evidence, after a day or two of wearing one around I'd say it's at least 50% of 'driving home from Squat Day' .. if you get that analogy. (testosterone up so much that it'd be a r.e.a.l.l.y stupid time for somebody to F with you)
After a while, weeks if you're lucky, the tubing will degrade at the ends and fail. You can fix this with easily available parts. Before that ever occurs the electrodes will have oxided several times .. that makes them stop working. It's simple to fix this like new by sanding them a bit until they're shiny again.
Do they flow electricity? Yes.
Do they raise testosterone? My opinion Yes.
Do they help with Penis Enlargement? 'Maybe'*. Stopped wearing mine about the third time the tubing failed. Just exceeded my attention span. Also too much of one hormone will usually cause unwanted aromatization byproducts .. in this case such as estrogen and DHT. One can make you grow 'bitch tits' and the other can make you go bald .. Just something to look out for in case you notice it.
*There's no known mechanism for a simple flux of zinc ions to cause the re-expression of genes which stop functioning during one's teens (re: making the penis GROW larger on its own), ..
*But .. zinc is definitely involved in the production of collagens/elastins and this could make you heal faster between Penis Enlargement sessions. Notable that process is said to work best if the zinc is already present at the time of the tissue trauma .. so if you can't wear one a lot then wearing the RoP before a session could be more helpful than afterwards, but that's ncbi info .. not from my direct experience.
- Joined
- Feb 25, 2013
- Messages
- 16,740
You threw away that money. The ring of power is trash.
- Joined
- Jan 6, 2023
- Messages
- 11,380
What is that?
- Joined
- Feb 25, 2013
- Messages
- 16,740
It's like a cock ring. They used to hype it before claiming it brings gains. But it's fake so it fell off the forum.
- Joined
- Jan 6, 2023
- Messages
- 11,380
Okey, thanks for explaining. It was practically like the oils and the pills they try to deceive (false advertising) people with.
- Joined
- Jan 6, 2023
- Messages
- 11,380
Okey thanks for sharing. Doesn't look like it can do anything for increasing size.
- Joined
- Jun 18, 2004
- Messages
- 1,514
- Joined
- Jan 6, 2023
- Messages
- 11,380
Okey.
- Joined
- Feb 25, 2013
- Messages
- 16,740
Exactly. Same fake items.
