LengthMaster How To Wrap For LengthMaster Penis Stretching To Fit Into Loose Foreskin

limpeh

Active member
Registered
Joined
Apr 28, 2023
Messages
212
The idea is to achieve the circumcised look without getting circumcision as I don't wanna loose a bunch of nerves. So I use a Sili Ring to retract my foreskin & hold it in around mid shaft (pulling the ring all the way back to base would result in foreskin moving freely again as if nothing holds it in place) so that I can apply my LengthMaster - Penis Bundle Stretcher & Weight Hanging wrap on the upper shaft. But the frustrating part is, even that my goal is to stretch as much as my inner penis out more, I have to wrap at my base & apply the LengthMaster at the base. to do that I have to do 2nd round of wrapping, this time on my mid shaft, after using the Sili Ring to push & hold more foreskin towards the base, & this is a time consuming process, & it's hard to push all of my foreskin away to get a flat surface. if I don't get a flat surface, I'll be stretching the foldings of my foreskins, which isn't something I want. The goal is for the inner penis to come out & fit into the foreskin properly. another challenge that I face is, as I touch my dick or use the Sili Ring, I couldn't help but get erect a bit. I hate this cuz by the time it becomes flacid in the LengthMaster, I'm pretty sure there're folds on my foreskin instead of a flat surface. Any ideas? @squirt_inducer_man

Even with the Sili Ring, the foreskin still moves & push the ring higher up instead of retaining a fixed position. It's frustrating.
 
The idea is to achieve the circumcised look without getting circumcision as I don't wanna loose a bunch of nerves. So I use a Sili Ring to retract my foreskin & hold it in around mid shaft (pulling the ring all the way back to base would result in foreskin moving freely again as if nothing holds it in place) so that I can apply my LengthMaster wrap on the upper shaft. But the frustrating part is, even that my goal is to stretch as much as my inner penis out more, I have to wrap at my base & apply the LengthMaster at the base. to do that I have to do 2nd round of wrapping, this time on my mid shaft, after using the Sili Ring to push & hold more foreskin towards the base, & this is a time consuming process, & it's hard to push all of my foreskin away to get a flat surface. if I don't get a flat surface, I'll be stretching the foldings of my foreskins, which isn't something I want. The goal is for the inner penis to come out & fit into the foreskin properly. another challenge that I face is, as I touch my dick or use the Sili Ring, I couldn't help but get erect a bit. I hate this cuz by the time it becomes flacid in the LengthMaster, I'm pretty sure there're folds on my foreskin instead of a flat surface. Any ideas? @squirt_inducer_man

Even with the Sili Ring, the foreskin still moves & push the ring higher up instead of retaining a fixed position. It's frustrating.
Are you retracting the foreskin before putting on Siliring?
 
So it's sliding off when stretching
nope. before i could place my penis in the chamber. the foreskin that was earlier pushed to the base push back the siliring upwards
 
yea, finally have the time to do so. the 1st pic shows my flacid & retracted penis with a foreskin with lots of unreversible folds thanks to the slow squash jelq. it's pretty loose & can be stretched all the way back at the base as seen in the 2nd pic due to pumping. only issue is there's no way to hold that stretch permanently at base. if i tried to secure that with the siliring, the foreskin's gonna push the siliring back to midshaft once I let my hand go.

I tried so hard to wrap my midshaft (when in the state shown in 2nd pic) to be placed in the lengthmaster's chamber (with siliring & hand securing the foreskin), but noticed that as I stretch with the lengthmaster, it pulls the foreskin a little due to the forward motion, & it lengthens my foreskin temporary. I'm afraid it'll become permanent cuz with pumping, the left side of my foreskin has grew bigger thanks to a slight curve to the right when fully erect. if I place the lengthmaster at my base, it just pull my foreskin forward to cover my gland.

so I have no idea to approach this whole PE thing without circumcision. cuz of fear of foreskin lengthening, I never jelq. any ideas on how can I approach with the wrapping?
 

Attachments

  • 1.jpg
    1.jpg
    97.5 KB · Views: 23
  • 2.jpg
    2.jpg
    100 KB · Views: 23
Last edited:
If I understand correctly, you want to do expressive stretching with the LengthMaster by attaching it at the base. Whether you are cut or uncut I don't think it's necessary to try to retract your foreskin if you want to perform this exercise.

If you want to do expressive stretching with the LengthMaster, wrap the penis at the extreme base, do not wrap it at mid shaft. After wrapping, attach the LengthMaster on top of the wrap which is at the extreme base.

Now, once the LengthMaster is attached, bundle the penis one rotation. That one bundled rotation will prevent you from stretching your foreskin. Bundle it and stretch. Simple and easy.

You are still new to PE that's why you are getting erect everytime you try attaching your LengthMaster. Also, when the erection goes down, do not conclude that the erection must have brought some folds. Stretch once the erection goes down.

I hope this helps.
 
yea, finally have the time to do so. the 1st pic shows my flacid & retracted penis with a foreskin with lots of unreversible folds thanks to the slow squash jelq. it's pretty loose & can be stretched all the way back at the base as seen in the 2nd pic due to pumping. only issue is there's no way to hold that stretch permanently at base. if i tried to secure that with the siliring, the foreskin's gonna push the siliring back to midshaft once I let my hand go.

I tried so hard to wrap my midshaft (when in the state shown in 2nd pic) to be placed in the lengthmaster's chamber (with siliring & hand securing the foreskin), but noticed that as I stretch with the lengthmaster, it pulls the foreskin a little due to the forward motion, & it lengthens my foreskin temporary. I'm afraid it'll become permanent cuz with pumping, the left side of my foreskin has grew bigger thanks to a slight curve to the right when fully erect. if I place the lengthmaster at my base, it just pull my foreskin forward to cover my gland.

so I have no idea to approach this whole PE thing without circumcision. cuz of fear of foreskin lengthening, I never jelq. any ideas on how can I approach with the wrapping?

@limpeh, I have written something that I think can help you.

My wrapping technique should work for you.
🔗 Wrapping version 2, for the lengthmaster.

This is my foreskin right now with a short flaccid and without any kind of stretching beforehand:
IMG_20230601_123907.jpg
IMG_20230601_124202.jpg
As you see I have a lot of foreskin still. But it have become much easier to clamp down in the chamber of the LengthMaster 3 - Penis Bundle Stretcher & Weight Hanging as I have grew in length.

There is 2 THERABAND pieces in my wrap, to deal with exactly this problem (to much foreskin). The first THERABAND is for cover the outer part of the shaft, and the second piece is to cover near the base. I need both pieces to make it work, even when I'm not doing expressive stretches (when you clamp down at the basr). I'm clamping down behind the glans, and it's recommended to start here.

My foreskin have not become more as I have increased my length. It's important, that you force your foreskin to stay back. The PENIS WRAPPING TAPE. I also use 2 cut up Phallosan forte glans protector caps, to keep the foreskin back and the wrap tight.

Everything is in my video instructions. I really think this wrap that I'm using will work for you as well, since my penis looks similar to yours in the amount of foreskin we have.

If you pull back the foreskin when you stretch, your forskin will not grow out of proportion as your penis grows. The opposite is true, your foreskin will fit your penis better. As I have become longer my foreskin fits me better, and it's easier to wrap my penis. I can even un-wrap and re-wrap my penis fast every 5 minutes now. Even with this amount of forskin.

Here is a picure of my supplies:
IMG_20230601_124754.jpg

The first piece of THERABAND (right in picture) is on a roll for making it more easy to apply it to my penis. You want as little creases and wrinkles as possible in the theraband, even when you have a lot of foreskin wrinkled there under. Don't pulk that back immediately. This is hard to explain with text. I need to make a new video explaining this. When you apply the bandage. Keep it rolled up as you are winding it. This will make it easier to wind it on top of the THERABAND.

The dimensions of everything is in my video instructions. I have bought more THERABAND and I cut it up with a really sharp scissor. It's important that the scissor is sharp sincr you want clean edges, so the THERABAND do not rip.

I need these two pieces of THERABAND, to make my wrap work (always).
The PENIS WRAPPING TAPE is as important to my wrap.

With both the PENIS WRAPPING TAPE (I reuse a piece for a longer time) and the two cut up Phallosan forte glans protector sleeves, I'm able to keep my wrap tight.

As I add the first sleeve I pull the wrapping back so my glans are fully out, then when the sleeve are applied, it hold back my foreskin. Then I add the second sleeve. The sleeves are 35 millimeter long (~ 1.38 inches) long. I will believe that a little longer silisleeve (a soft one and a thin one) from MoS Shop will work as well. But when I started out the black, PENIS WRAPPING TAPE, was enough for this task of keeping the wrap tight. Wrap the black tape tight around the bandage, and keep the foreskin back as you do this.

You can pull the wrap backwards towards your "fat pad" as you do this. You can even do this in the first stage as you have applied the theraband. You can apply your THERABAND pieces and then whrn you wind the bandage you pull on the THERABAND backwards as you apply the bandage piece. In this way it's easier to create the wrap.

You don't need to have the glans fully out (but out as much as possible), when ypu apply the THERABAND pieces (this is the reason it's two of them). You make this happen when you apply the bandage and when you wind the PENIS WRAPPING TAPE on top of the bandage. The small sleeve on top will make this easier. But it's important that the sleeve isn't to thick. You want as little of material in your wrap as possible so the chamber will grab the inner tissue of your penis.This is the reason you also wamt your foreskin pulled back as much as possible. The glans should be fully out when you have clamped down all the way.

The important thing is to keep the wrap tight.

Look at my clamp down video as well:
🔗 Clamping down to the chamber in the LENGTHMASTER 3, top view.

I make sure I compress my clans during the entirety of the clamp down in the chamber. In this way I can both make sure that there is as little of blood as possible in glans (will make the stretch nore comfortable, and reduce pressure on the glans).

Also with a firm grip on my glans I can pull my penis forward as well. Try to attach your penis near the base, to get the proper clamp down point.

The clamp down point after doing this method, when I do this, is behind my glans. I can clamp down at my base now. But you should not do this as new to stretching with LENGTHMASTER .

As I have clamped down a bit, I pull my penis forward and push myself into the LENGTHMASTER 3. In this way I force as much of the foreskin back with the help of the chamber. As I continue to clamp down some skin from my ball-sack will get stuck in the chamber. That's why I use this piece of bandage around my ball-sack. That is, to keep the skin from my ball-sack out of the chamber.

IMG_20230601_133204.jpg

Even with this tied around my ball-sack there will be some skin that get stuck in the chamber (skin from the ball-sack). When you have not clamped down all the way, you can carefully pull out the skin that is stuck. But don't do this immediately at the start. Remember your goal is to keep as much foreskin on your shaft pulled back as possible.

The only way for me to clamp down at the extreme base, is to have one of the sleeve's, as near my base as possible. You should not do expressive stretches (when you clamp down at the base) when you start out stretching with the lengthmaster. You should attach the lengthmaster behind your glans at first.

I hope this information helps you. If you need more support regarding this I'm willing to help you personally. Your problem is exactly what I struggle with when I started out using the lengthmaster. There was no video guide of the wrap back then, there where wrapping videos but not any wrapping videos that I could use for my specific problem with my "sea of forskin"

I personally struggled a lot with wrapping for the lengthmaster in the beginning. This is the reson I have created video guides about this. It's easier for me now to wrap. But I struggled a lot in the beginning. In my wrapping video it looks really easy for me, but some days even I struggle to get the wrap right.

You are not alone with this problem.
Just write if you need more support.
Hope this helps you.

Kind regards @squirt_inducer_man
 
Last edited:
Beautiful tutorial
 
Beautiful tutorial
Thanks. It needed to be written. @limpeh have the same problem I had, when I started to stretch with the LENGTHMASTER 3.

I hope he sees this.
 
Thanks. It needed to be written. @limpeh have the same problem I had, when I started to stretch with the LENGTHMASTER 3.

I hope he sees this.
Tag him
 
appreciate ya guys, will finally be able to give this a good read now after finishing work
 
If I understand correctly, you want to do expressive stretching with the LengthMaster by attaching it at the base. Whether you are cut or uncut I don't think it's necessary to try to retract your foreskin if you want to perform this exercise.

If you want to do expressive stretching with the LengthMaster, wrap the penis at the extreme base, do not wrap it at mid shaft. After wrapping, attach the LengthMaster on top of the wrap which is at the extreme base.

Now, once the LengthMaster is attached, bundle the penis one rotation. That one bundled rotation will prevent you from stretching your foreskin. Bundle it and stretch. Simple and easy.

You are still new to PE that's why you are getting erect everytime you try attaching your LengthMaster. Also, when the erection goes down, do not conclude that the erection must have brought some folds. Stretch once the erection goes down.

I hope this helps.
roger that. what do you mean by bundle?
 
@limpeh, I have written something that I think can help you.

My wrapping technique should work for you.
🔗 Wrapping version 2, for the lengthmaster.

This is my foreskin right now with a short flaccid and without any kind of stretching beforehand:
View attachment 1833164
View attachment 1833165
As you see I have a lot of foreskin still. But it have become much easier to clamp down in the chamber of the LENGTHMASTER 3 as I have grew in length.

There is 2 theraband pieces in my wrap, to deal with exactly this problem (to much foreskin). The first THERABAND is for cover the outer part of the shaft, and the second piece is to cover near the base. I need both pieces to make it work, even when I'm not doing expressive stretches (when you clamp down at the basr). I'm clamping down behind the glans, and it's recommended to start here.

My foreskin have not become more as I have increased my length. It's important, that you force your foreskin to stay back. The PENIS WRAPPING TAPE. I also use 2 cut up Phallosan forte glans protector caps, to keep the foreskin back and the wrap tight.

Everything is in my video instructions. I really think this wrap that I'm using will work for you as well, since my penis looks similar to yours in the amount of foreskin we have.

If you pull back the foreskin when you stretch, your forskin will not grow out of proportion as your penis grows. The opposite is true, your foreskin will fit your penis better. As I have become longer my foreskin fits me better, and it's easier to wrap my penis. I can even un-wrap and re-wrap my penis fast every 5 minutes now. Even with this amount of forskin.

Here is a picure of my supplies:
View attachment 1833166

The first piece of THERABAND (right in picture) is on a roll for making it more easy to apply it to my penis. You want as little creases and wrinkles as possible in the theraband, even when you have a lot of foreskin wrinkled there under. Don't pulk that back immediately. This is hard to explain with text. I need to make a new video explaining this. When you apply the bandage. Keep it rolled up as you are winding it. This will make it easier to wind it on top of the THERABAND.

The dimensions of everything is in my video instructions. I have bought more THERABAND and I cut it up with a really sharp scissor. It's important that the scissor is sharp sincr you want clean edges, so the THERABAND do not rip.

I need these two pieces of THERABAND, to make my wrap work (always).
The PENIS WRAPPING TAPE is as important to my wrap.

With both the PENIS WRAPPING TAPE (I reuse a piece for a longer time) and the two cut up Phallosan forte glans protector sleeves, I'm able to keep my wrap tight.

As I add the first sleeve I pull the wrapping back so my glans are fully out, then when the sleeve are applied, it hold back my foreskin. Then I add the second sleeve. The sleeves are 35 millimeter long (~ 1.38 inches) long. I will believe that a little longer silisleeve (a soft one and a thin one) from MoS Shop will work as well. But when I started out the black, PENIS WRAPPING TAPE, was enough for this task of keeping the wrap tight. Wrap the black tape tight around the bandage, and keep the foreskin back as you do this.

You can pull the wrap backwards towards your "fat pad" as you do this. You can even do this in the first stage as you have applied the theraband. You can apply your THERABAND pieces and then whrn you wind the bandage you pull on the THERABAND backwards as you apply the bandage piece. In this way it's easier to create the wrap.

You don't need to have the glans fully out (but out as much as possible), when ypu apply the THERABAND pieces (this is the reason it's two of them). You make this happen when you apply the bandage and when you wind the PENIS WRAPPING TAPE on top of the bandage. The small sleeve on top will make this easier. But it's important that the sleeve isn't to thick. You want as little of material in your wrap as possible so the chamber will grab the inner tissue of your penis.This is the reason you also wamt your foreskin pulled back as much as possible. The glans should be fully out when you have clamped down all the way.

The important thing is to keep the wrap tight.

Look at my clamp down video as well:
🔗 Clamping down to the chamber in the LENGTHMASTER 3, top view.

I make sure I compress my clans during the entirety of the clamp down in the chamber. In this way I can both make sure that there is as little of blood as possible in glans (will make the stretch nore comfortable, and reduce pressure on the glans).

Also with a firm grip on my glans I can pull my penis forward as well. Try to attach your penis near the base, to get the proper clamp down point.

The clamp down point after doing this method, when I do this, is behind my glans. I can clamp down at my base now. But you should not do this as new to stretching with LENGTHMASTER .

As I have clamped down a bit, I pull my penis forward and push myself into the LENGTHMASTER 3. In this way I force as much of the foreskin back with the help of the chamber. As I continue to clamp down some skin from my ball-sack will get stuck in the chamber. That's why I use this piece of bandage around my ball-sack. That is, to keep the skin from my ball-sack out of the chamber.

View attachment 1833167

Even with this tied around my ball-sack there will be some skin that get stuck in the chamber (skin from the ball-sack). When you have not clamped down all the way, you can carefully pull out the skin that is stuck. But don't do this immediately at the start. Remember your goal is to keep as much foreskin on your shaft pulled back as possible.

The only way for me to clamp down at the extreme base, is to have one of the sleeve's, as near my base as possible. You should not do expressive stretches (when you clamp down at the base) when you start out stretching with the lengthmaster. You should attach the lengthmaster behind your glans at first.

I hope this information helps you. If you need more support regarding this I'm willing to help you personally. Your problem is exactly what I struggle with when I started out using the lengthmaster. There was no video guide of the wrap back then, there where wrapping videos but not any wrapping videos that I could use for my specific problem with my "sea of forskin"

I personally struggled a lot with wrapping for the lengthmaster in the beginning. This is the reson I have created video guides about this. It's easier for me now to wrap. But I struggled a lot in the beginning. In my wrapping video it looks really easy for me, but some days even I struggle to get the wrap right.

You are not alone with this problem.
Just write if you need more support.
Hope this helps you.

Kind regards @squirt_inducer_man
much thanks for your help man. i'm still in the process of learning & understanding what you've jut typed, but i found the idea of wrapping the retracted foreskin at the base to be super helpful. that allows me to wrap my mid shaft smoothly. once i'm done with that, i removed the wrap at the base to lose erection before using the lengthmaster.
 
much thanks for your help man. i'm still in the process of learning & understanding what you've jut typed, but i found the idea of wrapping the retracted foreskin at the base to be super helpful. that allows me to wrap my mid shaft smoothly. once i'm done with that, i removed the wrap at the base to lose erection before using the lengthmaster.
You're welcome. Okey. I hope it works out for you. The best thing would be if I could make a video about this.

But my setup is to tape my phone to my head, that's a little awkward. 😅
I need to find another way.

As you stretch more, your erections will not happen when you attach in the chamber.
 
Love your videos!
Love this brotherhood. There will be more videos.
 
  • Like
Reactions: DLD
Back
Top Bottom