Lengthmaster wrapping uncut

Thebeastymusician said:

Hey,

I’ve been using the lengthmaster for almost 3 months and I’ve seen some slight gains. I’m not super satisfied with the results so far. Maybe I’ve been wrapping wrong since I’m uncut and not pulling the foreskin back. Because of this I’ve been bleeding during some of my workouts.

I tried to lookup some old threads where uncut guys show there wrapping technics but all the videos and pictures where no longer available. Could someone who’s uncut please show me there way of wrapping which has worked for them.

I’m really excited to make some gains but training like this is not fun. Hope someone could help me!

Thanks!

Click to expand...

Thebeastymusician said:

Thanks brother I’ll keep trying. Those words mean a lot to me 🙏

Click to expand...

LengthMaster 3 comfort and reinforcement

LengthMaster (LM) 3 contains both the Power Assist 2.0 and the LengthHanger unit. The LengthHanger unit may not agree with you directly during the strapping. Our brothers indicated there are some discomforts due to side pinches. Our brother @squirt_inducer_man provided insights to additional...

mattersofsize.com

• I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
• Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
• Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
• Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
• Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
• Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
• The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
• Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
• When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
• Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.

oldandlively said:

Got it. I think I know what's going on. I'm just visualizing the bare plates and padding for each side digging in. Brother SIM, myself, and a few others added cushions around our plates and perform the wrapping method. This is mine after a few months of adjustments and take other brothers' methods of comforts and reinforcement:

LengthMaster 3 comfort and reinforcement

LengthMaster (LM) 3 contains both the Power Assist 2.0 and the LengthHanger unit. The LengthHanger unit may not agree with you directly during the strapping. Our brothers indicated there are some discomforts due to side pinches. Our brother @squirt_inducer_man provided insights to additional...

mattersofsize.com

As for the wrapping, I happened to me ages ago, and at times even now. The cutting feelings causes by the pinching from bad wrapping can be a nightmare. Here's a trick to use. If you need more pictorial guide, let me know. Do take a snapshot of the penile body with the foreskin retract so we can give you a more accurate wrapping approach.

• I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
• Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
• Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
• Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
• Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
• Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
• The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
• Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
• When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
• Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.

Hope this helps brother.

Click to expand...

oldandlively said:

Got it. I think I know what's going on. I'm just visualizing the bare plates and padding for each side digging in. Brother SIM, myself, and a few others added cushions around our plates and perform the wrapping method. This is mine after a few months of adjustments and take other brothers' methods of comforts and reinforcement:

LengthMaster 3 comfort and reinforcement

LengthMaster (LM) 3 contains both the Power Assist 2.0 and the LengthHanger unit. The LengthHanger unit may not agree with you directly during the strapping. Our brothers indicated there are some discomforts due to side pinches. Our brother @squirt_inducer_man provided insights to additional...

mattersofsize.com

As for the wrapping, I happened to me ages ago, and at times even now. The cutting feelings causes by the pinching from bad wrapping can be a nightmare. Here's a trick to use. If you need more pictorial guide, let me know. Do take a snapshot of the penile body with the foreskin retract so we can give you a more accurate wrapping approach.

• I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
• Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
• Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
• Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
• Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
• Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
• The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
• Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
• When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
• Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.

Hope this helps brother.

Click to expand...

oldandlively said:

Got it. I think I know what's going on. I'm just visualizing the bare plates and padding for each side digging in. Brother SIM, myself, and a few others added cushions around our plates and perform the wrapping method. This is mine after a few months of adjustments and take other brothers' methods of comforts and reinforcement:

LengthMaster 3 comfort and reinforcement

LengthMaster (LM) 3 contains both the Power Assist 2.0 and the LengthHanger unit. The LengthHanger unit may not agree with you directly during the strapping. Our brothers indicated there are some discomforts due to side pinches. Our brother @squirt_inducer_man provided insights to additional...

mattersofsize.com

As for the wrapping, I happened to me ages ago, and at times even now. The cutting feelings causes by the pinching from bad wrapping can be a nightmare. Here's a trick to use. If you need more pictorial guide, let me know. Do take a snapshot of the penile body with the foreskin retract so we can give you a more accurate wrapping approach.

• I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
• Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
• Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
• Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
• Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
• Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
• The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
• Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
• When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
• Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.

Hope this helps brother.

Click to expand...

Thebeastymusician said:

I’ve also noticed that the pain is always coming from the base of the glans. Especially when I pull back my foreskin.

I just tried your method but I had a lot of pain. So I left the foreskin. At least it doesn’t hurt as much. But it stills hurts a lot at the end of my session and I start to bleed. Here is a picture of the bleeding.

I tried your method for almost 3 hours with readjusting all the time. I’m getting really desperate now for a good session.

Click to expand...

oldandlively said:

Got it! The frenulum is the victim. Yes, all PE journeyist have this issue. The short or sensitive frenulum is a primarly restricting factor for quite a bit of devices out there. I had mine professionaly removed. Brothers everywhere doing PE have their own frenulum cut through various methods, either by tying, physically cutting with a sharp instrument, or many methods that cause little to no pain.

However, the frenulum doesn't need to be cut to achieve the same effectiveness for the LengthMaster. As you have experienced with the LengthMaster over your foreskin, you get quite a bit of movement. The LengthMaster uses the glans as a stopping block like every other devices. Using the foreskin will allow the sliding to occur over the stopping block, which is your glans.

Also, by trapping blood in the glans like you have in the photo, you have a good large stopping block for the LengthMaster to grip onto. At the same, you also create quite a bit of terminal pressure on the glans that can also cause the bleeding as you to up on traction force. Just something to be aware of. Blood inside the glans must be removed as much as possible to prevent bleeding and blistering.

Alright, let try a different approach this time around. However, do let your wound heal for a couple of days before trying. Exercising with an open wound will delay the healing. Since we are dealing with a sensitive or short frenulum, you have to protected it with a padding. You can use the same Theraband, but fold it into a thick layer, either once or twice. The folded layers allow an extra cushion for your frenulum. I did this ages past when I use the traction device that causes my frenulum to bleed just like yours. Perform the same wrapping technique as before. However, this time, make sure all blood exit the glans. You will literally have a mummy of a penis tip before placing it between the plates.

Click to expand...

Abdiel Bull Berg said:

Very concise and detailed description, well written brother, hope it really helps him out.

Click to expand...

Abdiel Bull Berg said:

That’s the spirit brother, eventually you’ll get it done pain free, through trial and error.

And don’t mention it brother, we all need some words of encouragement once in a while, that’s what we brothers are here for, to encourage and learn from each other.

Click to expand...

bemorethanbig said:

So sorry to hear beast, never never should you bleed.

1. I recommend a complete stop until 100% healed
2. I recommend jelqing with coconut oil for 10 minutes prior to your length exercises. my frenulum was acting up during my first PE sessions with water lube (see stats)and I felt like it was holding back my gains before in 2011, now this whole year I've been on coconut oil and I've had zero issues with frenulum expansion
3. Have you ever done Manuals stretches? I only ask because if you had you would be more experienced on where to place your pressure to where get maxpush without any issues, and then you replicate that on the Lengthmaster( this is just an idea, not sure if vets agree)

Click to expand...

Thebeastymusician said:

Hey Brother,

Thanks for the advice I’m gonna let my penis heel for a few days and gonna start fresh with the way you’ve described.

I just did a session with some extra Thera band padding in the lengthmaster and watched the video of @squirt_inducer_man. This really helped. I had short session but didn’t have any pain at the bottom of the glans and it went quite well.

I’m gonna let the frenulum heal and start doing wrapping the glans better. Let’s see how it will go. Thanks for helping me I’ll let you know how it will go!

Click to expand...