It does take some practice to get good results dry.
Picture proof Voorheesxiii new log
- Thread starter VoorheesXIII
- Start date
-
- Tags
- log
It does take some practice to get good results dry.
Just a quick check in,
Still training every day, still focused purely on length work with LengthMaster/SiliStretcher combination. Despite popular opinion & practise I measure bpel & photograph it (almost) every single day so I can have a detailed record of any changes, the Red/NiR light boosts EQ like crazy so I might as well take some pics while I'm standing there i guess. I also track bpfsl before & after my LengthMaster sessions to see how effective the work was that day.
Currently my bpfsl before an LM session is 21.5cm/8.4in and after it is currently 22.6cm/8.8inches.
My bpel during my 1st Red light session for the day is at 19.8cm/7.7in & during the 2nd light session for the day it usually sits around 20.2cm, give or take 1 to 2mm depending on the weather, if I'm tired/hungry, etc etcetera. I only take pics of the 1st session erection as to keep consistency & not try to celebrate gains not cemented yet, but things are definitely looking promising, should have my order of new sleeves soon in the mail, am looking forward to working on some higher tension stretching in the SS once I get them in and will update again soon.
Latest bpel from yesterday morning for reference.
Still training every day, still focused purely on length work with LengthMaster/SiliStretcher combination. Despite popular opinion & practise I measure bpel & photograph it (almost) every single day so I can have a detailed record of any changes, the Red/NiR light boosts EQ like crazy so I might as well take some pics while I'm standing there i guess. I also track bpfsl before & after my LengthMaster sessions to see how effective the work was that day.
Currently my bpfsl before an LM session is 21.5cm/8.4in and after it is currently 22.6cm/8.8inches.
My bpel during my 1st Red light session for the day is at 19.8cm/7.7in & during the 2nd light session for the day it usually sits around 20.2cm, give or take 1 to 2mm depending on the weather, if I'm tired/hungry, etc etcetera. I only take pics of the 1st session erection as to keep consistency & not try to celebrate gains not cemented yet, but things are definitely looking promising, should have my order of new sleeves soon in the mail, am looking forward to working on some higher tension stretching in the SS once I get them in and will update again soon.
Latest bpel from yesterday morning for reference.
Attachments
@VoorheesXIII @DLD
Just a quick update on sillistretcher. I'm suffering a bit with bruises and blisters because of the suction. I've tried different techniques but i'm still suffering a bit. Tried using micropore tape, different protections on the tip of penis...
Do you guys have solution to the above problem? @VoorheesXIII
Just a quick update on sillistretcher. I'm suffering a bit with bruises and blisters because of the suction. I've tried different techniques but i'm still suffering a bit. Tried using micropore tape, different protections on the tip of penis...
Do you guys have solution to the above problem? @VoorheesXIII
Gotta be quick, off to work in a minute.
Sounds like a tolerance issue that needs to be gradually built up to. A quarter to a half turn is absolutely the most you need to turn the vacuum knob but the user must remember that as you apply stretch force the vacuum inside the bell will increase (anyone who has done HC bathmate/ MityVac stretches can attest to that) so the pressure is 2 fold in that sense.
The remedy? Less pressure when applying the device to your dick & a much more gentle stretch force to start with until that tolerance is built up, it may feel slow going starting again like that but all pe equipment goes through a similar learning curve.
I've had bruising as well as peeling/dry skin on the glans going too hard with the SiliStretcher, it happens, let the skin heal, use a good quality vitamin E cream on your junk when not doing pe to keep your skin happy and see how you go.
** I'll be back in action soon lads, I've been really crook for the last couple of weeks (not covid) & just daily function has been a struggle let alone wanting/trying to do pe. On the tail end of it though & my new SS bell should get here this week so you will see around a bit more.
Sounds like a tolerance issue that needs to be gradually built up to. A quarter to a half turn is absolutely the most you need to turn the vacuum knob but the user must remember that as you apply stretch force the vacuum inside the bell will increase (anyone who has done HC bathmate/ MityVac stretches can attest to that) so the pressure is 2 fold in that sense.
The remedy? Less pressure when applying the device to your dick & a much more gentle stretch force to start with until that tolerance is built up, it may feel slow going starting again like that but all pe equipment goes through a similar learning curve.
I've had bruising as well as peeling/dry skin on the glans going too hard with the SiliStretcher, it happens, let the skin heal, use a good quality vitamin E cream on your junk when not doing pe to keep your skin happy and see how you go.
** I'll be back in action soon lads, I've been really crook for the last couple of weeks (not covid) & just daily function has been a struggle let alone wanting/trying to do pe. On the tail end of it though & my new SS bell should get here this week so you will see around a bit more.
Thank you very much @VoorheesXIII
I received my replacement SiliStretcher bell yesterday, just want to say a quick thank you to DLD & the sales team at MoS for their understanding & quick reply, top notch customer service everytime.
Stoked to be training again, I could have done other stuff in the interim but one day off turns into 2 and then I got smacked down hard with the flu which I'm at the tail end of now, it is what it is, I'm here for the long haul & a few weeks off hasn't seen a regression of size other than a millimetre or 2 off length and mid shaft girth so that's a positive.
Current stats for record keeping @ 05/11/22
Bpel: 19.7cm
MsEg: 13 4cm
Stoked to be training again, I could have done other stuff in the interim but one day off turns into 2 and then I got smacked down hard with the flu which I'm at the tail end of now, it is what it is, I'm here for the long haul & a few weeks off hasn't seen a regression of size other than a millimetre or 2 off length and mid shaft girth so that's a positive.
Current stats for record keeping @ 05/11/22
Bpel: 19.7cm
MsEg: 13 4cm
Attachments
How you manage to measure and take a picture without loosing your erection amazes me. I have an upward curve which mandates me to strengthen it with one hand when measuring.
The MosRed is the champion of that story, best non-medicinal (I.e. not viagra) device for erection quality hands down.
Wonderful. I didn't know this before.
Thanks my brother
Test...
Nope still cannot figure out video uploading, it always loads to 100% then gets a line crossed through it & fails. I filmed a 10 second clip of my front yard as a test, it took almost 15 minutes to process, failed & redirected me to whatsapp? Wierd. I'll just keep trying, something will work eventually.
Nope still cannot figure out video uploading, it always loads to 100% then gets a line crossed through it & fails. I filmed a 10 second clip of my front yard as a test, it took almost 15 minutes to process, failed & redirected me to whatsapp? Wierd. I'll just keep trying, something will work eventually.
I was. I've had to turn down the video quality to a minimum but it works now. Will put some short videos together over the next week when I have some free time, I'll have a look in the SiliStretcher threads & see if I can add any value, suggestions are always welcome.
Update on the training, still just easing myself into vacuum tolerance with the SiliStretcher after those few weeks off doing nothing, a couple of hours worth after some newbie stretches done by hand for now, treating it like I'm brand new again for a week or two til I'm satisfied I can move into more heavy duty stretching with the LengthMaster. I'm breaking up the SS wear by taking it off every hour and a half to two hours (usually I have to pee anyway) for about 5 minutes while I pee & have to get hard again to put sleeves/SS bell back on, so far so good, no skin issues at all. I did get some dark discolouration one day as I had left the SiliStretcher on for 3 hrs straight no break, was a little much & my glans were a dark purplish colour upon taking the SS off but only lasted a minute & was a more a reddish colour after that so I stopped for the day to let it rest up, was fine by the next day.
Hey lads, got a few short demo vids done for applying the SiliStretcher, will upload 1 here to check quality before I start a new thread elsewhere. So far it's only putting the sleeve onto the bell, putting the SS on without a glans cap/sleeve, putting it on with the silicap on & taking it off etc. I do have a different way to stretch really hard downward that could possibly rival hanging also, it came to me when I was going through the garage a while back.
Anyways, here's a quick vid, I'll see what I can do over the next few days off work, between wife & kids it can be hard to do pe sometimes let alone try & set up to film it so bear with me. I'm totally open to suggestion for videos around the SiliStretcher, please feel free to put any ideas forth.
Edit: even with my video quality set to absolute minimum on my phone I can't upload a video longer than a minute so will have to keep that in mind for future vids.
Anyways, here's a quick vid, I'll see what I can do over the next few days off work, between wife & kids it can be hard to do pe sometimes let alone try & set up to film it so bear with me. I'm totally open to suggestion for videos around the SiliStretcher, please feel free to put any ideas forth.
Edit: even with my video quality set to absolute minimum on my phone I can't upload a video longer than a minute so will have to keep that in mind for future vids.
Last edited:
Thanks so much...excellent video
Popping in again with some good news & some not so happy......
Good news is I'm able to get back on track with length training again now that it's not hot as balls here so that's motivation in itself but unfortunately, i was just setting up to get started with the lengthmaster, was lined up in the chamber, pressed the bundle chamber down with my palm like a hundred times prior but this time...... CRACK!!! holllllly shit the fucken thing snapped! Scared me haha.
Was going to grab a Mity-Vac when i topped up on a fresh batch of Silisleeves/caps soon for the year but might have to put it on the backburner for a new LM, if there are any left, what a bummer, the currency exchange even for us in Australia atm is terrible at 67c on the dollar, i think the LM costs about just under $300 here without shipping......ouch. Oh well, i got a good couple years out of it at least and it gives me a chance to try a type of vacuum hanging i started last year.
View attachment 1832673View attachment 1832674View attachment 1832675
Good news is I'm able to get back on track with length training again now that it's not hot as balls here so that's motivation in itself but unfortunately, i was just setting up to get started with the lengthmaster, was lined up in the chamber, pressed the bundle chamber down with my palm like a hundred times prior but this time...... CRACK!!! holllllly shit the fucken thing snapped! Scared me haha.
Was going to grab a Mity-Vac when i topped up on a fresh batch of Silisleeves/caps soon for the year but might have to put it on the backburner for a new LM, if there are any left, what a bummer, the currency exchange even for us in Australia atm is terrible at 67c on the dollar, i think the LM costs about just under $300 here without shipping......ouch. Oh well, i got a good couple years out of it at least and it gives me a chance to try a type of vacuum hanging i started last year.
View attachment 1832673View attachment 1832674View attachment 1832675
