Picture proof Voorheesxiii new log

Popping in again with some good news & some not so happy......

Good news is I'm able to get back on track with length training again now that it's not hot as balls here so that's motivation in itself but unfortunately, i was just setting up to get started with the lengthmaster, was lined up in the chamber, pressed the bundle chamber down with my palm like a hundred times prior but this time...... CRACK!!! holllllly shit the fucken thing snapped! Scared me haha.

Was going to grab a Mity-Vac when i topped up on a fresh batch of Silisleeves/caps soon for the year but might have to put it on the backburner for a new LM, if there are any left, what a bummer, the currency exchange even for us in Australia atm is terrible at 67c on the dollar, i think the LM costs about just under $300 here without shipping......ouch. Oh well, i got a good couple years out of it at least and it gives me a chance to try a type of vacuum hanging i started last year.

View attachment 1832673View attachment 1832674View attachment 1832675

There is a life time warranty for this. @DLD
 
Yes, but i glued a layer of Silisleeve onto each bundle chamber for comfort/grip so technically I've altered the original design thus voiding warranty, it's all good, MoS doesn't owe me anything.
 
Yes, but i glued a layer of Silisleeve onto each bundle chamber for comfort/grip so technically I've altered the original design thus voiding warranty, it's all good, MoS doesn't owe me anything.

Alright brother, I understand. Now that I have your attention, I would like to ask you some questions.

I saw one of your threads in which you complained about wrapping your penis after a pumping session. You said it seems the wrapping is working against the expansion. You suggested that, after removing the cock ring, the penis shouldn't be wrapped.

I hope you are the one who said this because I can't find that thread now.

Secondly, how much girth gains have you made from pumping and how long did it take you?
 
Popping in again with some good news & some not so happy......

Good news is I'm able to get back on track with length training again now that it's not hot as balls here so that's motivation in itself but unfortunately, i was just setting up to get started with the lengthmaster, was lined up in the chamber, pressed the bundle chamber down with my palm like a hundred times prior but this time...... CRACK!!! holllllly shit the fucken thing snapped! Scared me haha.

Was going to grab a Mity-Vac when i topped up on a fresh batch of Silisleeves/caps soon for the year but might have to put it on the backburner for a new LM, if there are any left, what a bummer, the currency exchange even for us in Australia atm is terrible at 67c on the dollar, i think the LM costs about just under $300 here without shipping......ouch. Oh well, i got a good couple years out of it at least and it gives me a chance to try a type of vacuum hanging i started last year.

View attachment 1832673View attachment 1832674View attachment 1832675


Yes, but i glued a layer of Silisleeve onto each bundle chamber for comfort/grip so technically I've altered the original design thus voiding warranty, it's all good, MoS doesn't owe me anything.

That's good you feel like it's all good.
But next time don't use glue, use rubber bands to attach the extra grip pads (Silisleev's) you attach. Then you can change them out as they are wearing down, and you do not change the orginal design. I'm doing that with THERABAND to get a better grip in the chamber.

I have the same problem with getting equipment from MOS. It's not that the equipment are expensive (I think the prices are perfect).
It's just it's like a little more then ~100 USD to ship it to where I live, so I need to order in bulk, If I want to order anything. I want tracking of the package all the way from MOS to my country/town.

I'm wondering how it's going with, trying to set up a shipment option through Amazon?
@DLD, do you have any further information on this? We talked about this before in a different thread.

It may be possible to reduce the shipment costs through Amazon, I don't know?

But it doesn't matter now.
To bad your: Gymnastic Device broke.
But if the rest of the lengthmaster is okay you can buy: LENGTHHANGER - PENIS WEIGHT HANGING only, then you save some money.
But maybe they have change the design from when you bought it. Was it the LENGTHMASTER 3 that broke, if so you are good?

Kind regards.
I'm following your thread, it was interesting.
 
Just wanted to also show my length training set up for the mean time as i had seen YKM123 in the past had done this with the LM & eye hooks screwed into the walls, i always thought it was an interesting idea but not practical for most blokes.

My set-up consists of the SiliStretcher - digital tension scale - hooks/bands/cuff from the hardcore belt kit & a suction cup device used to pull out dents in car doors to attach to the wall/floor. It's not quite hanging but works on the same principles of training, i guess anchoring would be a more accurate description.

Yesterday i did a session consisting of stretching @ 8lbs for 5 minutes straight up, straight down, between the cheeks, straight out and then a final 5 minutes straight out but using the power assist to do a V and an A stretch, totalling 25 minutes of stretching. I wore the SS for a further 5 hours after, at a moderate tension strapped below the knee.
 

Attachments

  • Screenshot_20230408_091911_Gallery.jpg
    Screenshot_20230408_091911_Gallery.jpg
    693.9 KB · Views: 77
  • Screenshot_20230408_091819_Gallery.jpg
    Screenshot_20230408_091819_Gallery.jpg
    748.9 KB · Views: 76
I recieved my LM bundle chamber in the mail! The updated design (i had LM 2.0 i believe) works like a dream! The black rubber pads had shifted so i peeled it off to have a look under the hood before sticking them back down. The 3 main things that i can see are different are the angle/depth of the inner hollow is shallower, so less pinching on the sides, the bolt holes are toward the centre as opposed to the outer wings (i believe mine snapped due to this older positioning) & probably the biggest change to comfort is the recessed/routed out bit where the hanging strap is bolted to, that little bit of clearance behind the glans as oppossed to the older model is night/day difference (for me anyway). Excellent upgrade MoS! Some comparitive shots below & some in action, i tell you what, being able to hold a bundled stretch for 5 minutes under an accurate & consistent tension is such a great feeling haha, thank you DLD & MoS team again.
 

Attachments

  • Screenshot_20230510_101632_Gallery.jpg
    Screenshot_20230510_101632_Gallery.jpg
    622.8 KB · Views: 56
  • Screenshot_20230510_101546_Gallery.jpg
    Screenshot_20230510_101546_Gallery.jpg
    806.1 KB · Views: 48
  • Screenshot_20230510_093831_Gallery.jpg
    Screenshot_20230510_093831_Gallery.jpg
    804.5 KB · Views: 52
  • Screenshot_20230510_094022_Gallery.jpg
    Screenshot_20230510_094022_Gallery.jpg
    1.2 MB · Views: 53
I recieved my LM bundle chamber in the mail! The updated design (i had LM 2.0 i believe) works like a dream! The black rubber pads had shifted so i peeled it off to have a look under the hood before sticking them back down. The 3 main things that i can see are different are the angle/depth of the inner hollow is shallower, so less pinching on the sides, the bolt holes are toward the centre as opposed to the outer wings (i believe mine snapped due to this older positioning) & probably the biggest change to comfort is the recessed/routed out bit where the hanging strap is bolted to, that little bit of clearance behind the glans as oppossed to the older model is night/day difference (for me anyway). Excellent upgrade MoS! Some comparitive shots below & some in action, i tell you what, being able to hold a bundled stretch for 5 minutes under an accurate & consistent tension is such a great feeling haha, thank you DLD & MoS team again.
Very good use! I am so happy you received it. This will really take things to the next level
 
I recieved my LM bundle chamber in the mail! The updated design (i had LM 2.0 i believe) works like a dream! The black rubber pads had shifted so i peeled it off to have a look under the hood before sticking them back down. The 3 main things that i can see are different are the angle/depth of the inner hollow is shallower, so less pinching on the sides, the bolt holes are toward the centre as opposed to the outer wings (i believe mine snapped due to this older positioning) & probably the biggest change to comfort is the recessed/routed out bit where the hanging strap is bolted to, that little bit of clearance behind the glans as oppossed to the older model is night/day difference (for me anyway). Excellent upgrade MoS! Some comparitive shots below & some in action, i tell you what, being able to hold a bundled stretch for 5 minutes under an accurate & consistent tension is such a great feeling haha, thank you DLD & MoS team again.

That sounds like an improvement. Unfortunately, I have the first model or 2.0 I’m not totally sure I got mine a couple of years ago. But it still works like a dream : )

If I may ask, how are you usually the digital scale When it comes to stretching? And how hard are you stretching using it?
 
Last edited:
Weight will be different for every man. Get yourself to your max stretch and go by that
 
I recieved my LM bundle chamber in the mail! The updated design (i had LM 2.0 i believe) works like a dream! The black rubber pads had shifted so i peeled it off to have a look under the hood before sticking them back down. The 3 main things that i can see are different are the angle/depth of the inner hollow is shallower, so less pinching on the sides, the bolt holes are toward the centre as opposed to the outer wings (i believe mine snapped due to this older positioning) & probably the biggest change to comfort is the recessed/routed out bit where the hanging strap is bolted to, that little bit of clearance behind the glans as oppossed to the older model is night/day difference (for me anyway). Excellent upgrade MoS! Some comparitive shots below & some in action, i tell you what, being able to hold a bundled stretch for 5 minutes under an accurate & consistent tension is such a great feeling haha, thank you DLD & MoS team again.
This was interesting. I love the fact that the LENGTHMASTER is under a continuous process of optimization and development.
 
  • Like
Reactions: DLD
That sounds like an improvement. Unfortunately, I have the first model or 2.0 I’m not totally sure I got mine a couple of years ago. But it still works like a dream : )

If I may ask, how are you usually the digital scale When it comes to stretching? And how hard are you stretching using it?
Don't get me wrong, i really liked the old design, it was just unfortunate it snapped. I was actually surprised at the changes that had been made when i looked at the newest version.

I use the scale for the purpose shown in the above pics, as an accurate way to measure tension while doing stretching. It was being used with the SiliStretcher for a bit but now I'll be using it with the LM chamber, i just find compression versus vacuum stretching in this fashion to be more intense so I'll go that route. When i used the SiliStretcher i got up to 12lbs tension for 5 x 5 minute sets, with the LM, I'm using 6 - 7lbs of tension & it feels way more intense just by the different attachment plus I'm still getting to my target bpfsl for the end of the session at the lower tension.
 
Don't get me wrong, i really liked the old design, it was just unfortunate it snapped. I was actually surprised at the changes that had been made when i looked at the newest version.

I use the scale for the purpose shown in the above pics, as an accurate way to measure tension while doing stretching. It was being used with the SiliStretcher for a bit but now I'll be using it with the LM chamber, i just find compression versus vacuum stretching in this fashion to be more intense so I'll go that route. When i used the SiliStretcher i got up to 12lbs tension for 5 x 5 minute sets, with the LM, I'm using 6 - 7lbs of tension & it feels way more intense just by the different attachment plus I'm still getting to my target bpfsl for the end of the session at the lower tension.

Thanks so much for the info 😊

I noticed you’re using a sleeve as a wrap do you add lubricant to your penis before slipping on the sleeve? I’m thinking about trying this tonight with the LengthMaster.
 
Help Users

You haven't joined any rooms.

    You haven't joined any rooms.
    Back
    Top