Suction on Silistretcher

Hey brothers I've been using the Silistretcher for the past 3-4 weeks starting to get the hang of it. I'm using a sili cap sleeve, silisleeve, and the small duro sleeve over an Uncle Jim wrap. I'm having trouble with the suction on the bell. Whenever I turn the knob to suck up.., the head of the penis doesn't move much or at all. The only thing helping me right now is keeping my glans squeezed in the bell before rolling the sleeve. Still able to get a decent stretch but with better suction I can stretch harder. I have used a silipad but that didn't help and currently I have the bell stuffed with some tissue paper.

As well some of sleeves appear to be getting pinholes which requires me to buy new ones now. Does anyone have a visual pic of the theraband trick with the Silistretcher bell? I've read up on it but can really visualize it in my head lol
 
If you trick is working keep it up. I am sure @oldandlively will come through on the theraban question. I have never made that modification. As far as pinhole goes, do you have long or raggedy nails? This is usually the case. If so be sure to file them down smoothly until they no longer effect the sleeves.
 
Hey brothers I've been using the Silistretcher for the past 3-4 weeks starting to get the hang of it. I'm using a sili cap sleeve, silisleeve, and the small duro sleeve over an Uncle Jim wrap. I'm having trouble with the suction on the bell. Whenever I turn the knob to suck up.., the head of the penis doesn't move much or at all. The only thing helping me right now is keeping my glans squeezed in the bell before rolling the sleeve. Still able to get a decent stretch but with better suction I can stretch harder. I have used a silipad but that didn't help and currently I have the bell stuffed with some tissue paper.

Yep. This is where most of us are. We squeezed our glans into the cup as much as we can, going as far as close the top of the cup as possible. This way, you take advantage of a full suction support. Your method is the same as mine, using some tissue paper to create a cushion space, but also a moisture wicking space. Moisture is your worst enemy during long hours of wearing.

A trick we've used:
  • Wrap a Theraband layer at the base of the glans. This is to create additional suction and also traction.
  • Push your deflated glans into the cup far up as you can. Don't inflate your glans. Make sure you only need 1 to 1.5 full turns at the top. That's all you need. Why? Any more turns that this will cause blister during high movements. We all suffer from this.
  • Roll the sleeve over the cup and only 1.5in of your penile shaft. You don't need that much. Just enough to cover the Theraband wrap layer for creating that extra suction pressure seal and another 0.5in or 1in of skin cover to ensure traction holding during pressure.
  • Turn 3/4 rotation to max of 1 rotation on the knob. This is already creating 5 to 6inHg of pressure. You will cause blister if the pressure accidentally jumps past 8inHg in just a few seconds if you have not precondition your glans yet.
As well some of sleeves appear to be getting pinholes which requires me to buy new ones now. Does anyone have a visual pic of the theraband trick with the Silistretcher bell? I've read up on it but can really visualize it in my head lol

This is caused by the kink at the base of the bell. There's the thread that may answer your question:

 
Thank you @DLD and @oldandlively! In the process of ordering some new silisleeves today after taking a little hiatus from internet. Been working with the Silistretcher for over a month now and so far wonderful. The holes on the silicap I was referring to is at the at the top of the head. It's on each cap.i don't know if that's how it's supposed to be. I have been able to get the better suction thanks to the advice given. Just curious to know, what is the most one can gain with a silistretcher in length? I have gained about .75- 1 inch BPEL using mechanical devices (lengthmaster)within PE but always used a Uncle Jim wrap for traction extension.
 
Thank you @DLD and @oldandlively! In the process of ordering some new silisleeves today after taking a little hiatus from internet. Been working with the Silistretcher for over a month now and so far wonderful. The holes on the silicap I was referring to is at the at the top of the head. It's on each cap.i don't know if that's how it's supposed to be.

Yes that is correct.
I have been able to get the better suction thanks to the advice given. Just curious to know, what is the most one can gain with a silistretcher in length? I have gained about .75- 1 inch BPEL using mechanical devices (lengthmaster)within PE but always used a Uncle Jim wrap for traction extension.

that is great 1 inch is amazing growth. how much can you grow with silistretcher, I would say an inch a year maybe 3 inches. I would not just use your SiliStretcher and LengthMaster in tandem with your SiliStretcher to gain faster.
 
The holes on the silicap I was referring to is at the at the top of the head. It's on each cap.i don't know if that's how it's supposed to be.

The hole is a bleed hole. The bleed hole allows air to escape to prevent the cap from self inflating, causing strange mushroom and hotspots that prevents the wearer from getting a good suction. Sometimes, the baloon cap can cause blister because teh cap is not pressurizing the skin like it should be doing.

Just curious to know, what is the most one can gain with a silistretcher in length? I have gained about .75- 1 inch BPEL using mechanical devices (lengthmaster)within PE but always used a Uncle Jim wrap for traction extension.

This is person-to-person basis. SiliStretcher is a traction device. Some can gain as little as 0.25in in 6 months, and some can gain as much as 1.5in in 6 months. There is no average data we can give you. There is a formula that we can provide to you according to one of our brothers that used the AI modeling code. On average out of a 1,000 samples, a penis can get as much as 1.2in per 6 months if and only if the traction force can maintain above 1.1kg and below 1.5kg. This is just an average. You need to approach this average wih a major bottle of salt.
 
that is great 1 inch is amazing growth. how much can you grow with silistretcher, I would say an inch a year maybe 3 inches. I would not just use your SiliStretcher and LengthMaster in tandem with your SiliStretcher to gain faster.
Since the fall of 2023, I have only been focusing only on length purely. Just using the lengthmaster only and using an Uncle Jim wrap for elongation up until a month ago when I started using the silistretcher.
So far with the lengthmaster I have done the Beginner routine, Downward stretch, DLD Blasters, and BTC stretch. Switching to the next routine every 3 months. Bundle only and I have been doing 2x 20 minute sessions. Other than the lengthmaster what else can I do to grow length faster? I heard pumping slows down if not stop length gains. I even seen a post from another brother that said he lost 0.5 inch after focusing on girth and stopping length exercises even after consecutive years of doing length lol
 
The hole is a bleed hole. The bleed hole allows air to escape to prevent the cap from self inflating, causing strange mushroom and hotspots that prevents the wearer from getting a good suction. Sometimes, the baloon cap can cause blister because teh cap is not pressurizing the skin like it should be doing.
Makes sense. So the hole is normal on the silicap but not the sleeves? I was confused when I seen my caps with a little tiny hole in it lol.
Going forward regarding the amount of time it takes to gain with the SS, I just wanted to make sure I didn't reach a plateau when it comes to length. Or if one can ever hit one.. maybe it's me just trying to reach amongst the stars of PE
 
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    Zebigger is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    madmck1 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Marlon is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    wolf211330 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Plancket is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    wasynopa is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Tickman10 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    harielb is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    RobertHath is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    jauxwaqu is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    amelia5668 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Shinepep is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Black Mamba is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    lucy76 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Damojo is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Account4458 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    MadDog2013 is our newest member. Welcome!
  • Quote
  • A @ Account4458:
    plz check my thread
    Quote
  • MoS Notifier MoS Notifier:
    xDaniFa is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    odysseyhosting is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    uniball is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    rmrzsa97 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    JamesRo is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    pawstahu is our newest member. Welcome!
      MoS Notifier MoS Notifier: pawstahu is our newest member. Welcome!
      Back
      Top