Silistretcher vs Stealth Stretcher?

[thedudefather]

So you wanna pull glans back all the way before entering ?

You want as much of your glans in the cup as possible. Like I jam my shit in there and keep it pressed until I'm able to create the seal and vacuum

 

[oldandlively]

So you wanna pull glans back all the way before entering ?

Yes. Always pull your foreskin completely back from the glans. If you don't pulll your foreskin back before shoving your glans in, it will slip. This is the side benefit to have the bulk wrap at the bottom of the glans, because it helps to pull the skin back to prevent slippage during moisture build up, or when your penile shaft shrinks a bit.

By the way, your glans does expand slightly under pressure, like it or not. This is why we don't over expand our glans before turning the knob. The 4.5inHg inside the penis will turn into 8inHg in no time at all even with just 3/4 of a turn on the knob.

 

[oldandlively]

You want as much of your glans in the cup as possible. Like I jam my shit in there and keep it pressed until I'm able to create the seal and vacuum

Talking dirty while PE with a cup heh?

 

[thedudefather]

I'll post a video tomorrow

 

[thedudefather]

Talking dirty while PE with a cup heh?

Only to make sure my ding dong knows it's place, but after a few months it'll start barking back

 

[DLD]

Only to make sure my ding dong knows it's place, but after a few months it'll start barking back

Your going to have teach that muthafucka to watch is ways or you beat him up

 

[thedudefather]

Your going to have teach that muthafucka to watch is ways or you beat him up

I'll twist his neck and yank him every which way

 

[oldandlively]

I'll twist his neck and yank him every which way

Such love talk should be shared for the future bedroom dirty talk, or is it driving foreplay?

 

[thedudefather]

I'm trying to upload this video but it keeps saying the file size is too large for the server but I can't really trim it down any more. @oldandlively think you might be able to help me out?

 

[oldandlively]

I'm trying to upload this video but it keeps saying the file size is too large for the server but I can't really trim it down any more. @oldandlively think you might be able to help me out?

Yep. I can sure help. Because we are on a budgeted server with not much space to use, especially for videos, we contrained it down to 10MB max for files. Share the video with me via Google Photos or Google Drive as a private link if you like, I'll download it and increase is compressed size to post and place in your media album

 

[thedudefather]

Yep. I can sure help. Because we are on a budgeted server with not much space to use, especially for videos, we contrained it down to 10MB max for files. Share the video with me via Google Photos or Google Drive as a private link if you like, I'll download it and increase is compressed size to post and place in your media album

I'll convert it to Google drive if you can dm me your email or a good place to share it to

 

[thedudefather]

Actually I just sent a dm

 

[oldandlively]

That's another away around it, but the file will be purged later by the system to preserve space.

 

[DLD]

I'll twist his neck and yank him every which way

Twist it with a lenghtmaster and pull. This will definitely bring him to shut up. You may hear a snap but that is his neck cracking I'll twist his neck and yank him every which way Twist it with a lenghtmaster and pull. This will definitely bring him to shut up. You may hear a snap but that is his neck cracking

 

[thedudefather]

Ok so now that I've gotten the hang of the slilstretcher, here is what my routine will be going forward:

- 5mins bundled stretches in the shower
- 5mins mosred
- 30mins bundled stretching with LM
- 5min warm down with mosred
- 4hrs at good tugging intensity with silistretcher
- 4hrs low intensity for elongated healing in silistretcher
- finish off with silisleeve before bed

This is my length only routine, ideally looking to gain close to 1-1.5" by the end of the year.

 

[oldandlively]

Looks good. Let's give that routine a try and see if you can get the length you want or even go beyond that.

 

[thedudefather]

Looks good. Let's give that routine a try and see if you can get the length you want or even go beyond that.

Currently I'm sitting at 7.5" bpel so an inch and a half would put me 0.5" past my goal, which would be perfect for me to switch my focus to girth.

 

[oldandlively]

Stop aiming only for the 0.5in. Go for broke with 5 more inches That will be one scary looking weapon.

 

[thedudefather]

Stop aiming only for the 0.5in. Go for broke with 5 more inches That will be one scary looking weapon.

Haha now that would be something. I'd be a hit at all the nude beaches

 

[DLD]

Stop aiming only for the 0.5in. Go for broke with 5 more inches That will be one scary looking weapon.

Funny, I always made ridiculous goal for the long term goals and this helped me stare down the bully and go where I never thought possible. Measure once every six months but always measurement of flaccid penis bone pressed and girth. This is a means of making sure your gains are happening.

 

[thedudefather]

So I'm about 2 weeks into my routine and I'm already seeing some great EQ gains and what seem to be some flaccid gains. No measuring yet, but pretty stoked with what I'm seeing so far.

 

[DLD]

So I'm about 2 weeks into my routine and I'm already seeing some great EQ gains and what seem to be some flaccid gains. No measuring yet, but pretty stoked with what I'm seeing so far.

That's the way! When you love something enough you can make incredible strides. With the EQ gains, what are you doing to make this happen?

 

[thedudefather]

That's the way! When you love something enough you can make incredible strides. With the EQ gains, what are you doing to make this happen?

Just my routine that I posted above haha. Idk, the silistretcher has been amazing for keeping me elongated because I've only been using sleeves alone until now.

My morning wood has been looking longer since I started using it.

 

[thedudefather]

Post session i typically I'll either have a protein shake or take ~3g of l-citrulline malate 2:1 and an hour or so before bed I'll take 480mg of magnesium glycinate

 

[thedudefather]

Hey guys, been awhile. Apologies for not updating anything, I've been busy with work and also rescued a puppy about 6 weeks ago.

PE has been on the back burner but now that things are settling down, I plan on getting back to it.

Going to try experimenting with water pumping and see how I'm best able to go about it.

 

[oldandlively]

Prioritize what you need to do first. PE is not always the secondary or the fifth item on the list. Mine is currently the 10th item on the list.

 

[thedudefather]

Prioritize what you need to do first. PE is not always the secondary or the fifth item on the list. Mine is currently the 10th item on the list.

Oh I have been. The pup has had me walking 5 miles a day now, mental health is much better, work is going a lot better. Things have been on the uptick

 

[DLD]

Oh I have been. The pup has had me walking 5 miles a day now, mental health is much better, work is going a lot better. Things have been on the uptick

It's good for you. God is smiling upon you.And you're making everything work out. I'm very proud of you.

 

[thedudefather]

It's good for you. God is smiling upon you.And you're making everything work out. I'm very proud of you.

Thanks @DLD ! Can't wait to get back into a good PE routine once things calm down a bit more

 

[thedudefather]

Question about water pumping - what's the best way to keep water from shooting up the tubes? The reservoir doesn't fill much, seems like the water just skips it.

 

[oldandlively]

Question about water pumping - what's the best way to keep water from shooting up the tubes? The reservoir doesn't fill much, seems like the water just skips it.

Upgrade the reservoir to 1L. SIM and I upgraded ours and we haven't need to worry about it since. The upgrade, depending the manufacturer, can be anywhere at $30 to $50.

Heavy Duty Autoclavable Polypropylene Vacuum Bottle, 1L, with 53mm (53B) Tangle Free VersaCap, Two 1/4 Inch Hose Barbs and Sealable Vent Port: Science Lab Bottles: Amazon.com: Industrial & Scientific

Heavy Duty Autoclavable Polypropylene Vacuum Bottle, 1L, with 53mm (53B) Tangle Free VersaCap, Two 1/4 Inch Hose Barbs and Sealable Vent Port: Science Lab Bottles: Amazon.com: Industrial & Scientific

www.amazon.com

The company jacked up the price since there have been been major amount of ordering for PE. Freaking company.

 

[thedudefather]

Upgrade the reservoir to 1L. SIM and I upgraded ours and we haven't need to worry about it since. The upgrade, depending the manufacturer, can be anywhere at $30 to $50.

Heavy Duty Autoclavable Polypropylene Vacuum Bottle, 1L, with 53mm (53B) Tangle Free VersaCap, Two 1/4 Inch Hose Barbs and Sealable Vent Port: Science Lab Bottles: Amazon.com: Industrial & Scientific

Heavy Duty Autoclavable Polypropylene Vacuum Bottle, 1L, with 53mm (53B) Tangle Free VersaCap, Two 1/4 Inch Hose Barbs and Sealable Vent Port: Science Lab Bottles: Amazon.com: Industrial & Scientific

www.amazon.com

The company jacked up the price since there have been been major amount of ordering for PE. Freaking company.

Much appreciated! There definitely seems to be more of a learning curve when pumping with water vs air

 

[DLD]

Thanks @DLD ! Can't wait to get back into a good PE routine once things calm down a bit more

Well, I will be here for you my brother, i'm not going anywhere unless the Holy Father calls me to heaven

 

[thedudefather]

Well, I will be here for you my brother, i'm not going anywhere unless the Holy Father calls me to heaven

I do want to pick your brain about a good routine once I'm ready to get back in. I'm going to adjust my goals - instead of shooting for a big number, I want to gain and cement 0.25" length at a time.

 

[Growing4Squirting]

Oh I have been. The pup has had me walking 5 miles a day now, mental health is much better, work is going a lot better. Things have been on the uptick

kill the devil my brother.Let the light of God come into your heart

 

[DLD]

kill the devil my brother.Let the light of God come into your heart

Praise Jesus!

 

[thedudefather]

Hey guys, it's been 3 months since my last pe routine. If I started back with the newbie routine and progressing from using hands to lengthmaster, would i experience any new gains or would I just be getting my previous gained length back?

 

[oldandlively]

Hey guys, it's been 3 months since my last pe routine. If I started back with the newbie routine and progressing from using hands to lengthmaster, would i experience any new gains or would I just be getting my previous gained length back?

What you gained will remained as gains. When you restart due to a long break, the gains will compound to the new gains. You can observe through the stretched length of before and after routines. We called it "potential gain", but what you will experience is "compounding gain".

 

[thedudefather]

So I can definitely expect new gains. Sweet.

What you gained will remained as gains. When you restart due to a long break, the gains will compound to the new gains. You can observe through the stretched length of before and after routines. We called it "potential gain", but what you will experience is "compounding gain".

 

[thedudefather]

Another question i have is this- when I would use my silistretcher, I'd notice that after removing the bell, only about half of my glans would show any signs of "vacuum pull", if that makes sense. Does that mean I need a larger size bell?

 

[oldandlively]

Another question i have is this- when I would use my silistretcher, I'd notice that after removing the bell, only about half of my glans would show any signs of "vacuum pull", if that makes sense. Does that mean I need a larger size bell?

Makes perfect sense. I happens to me too. If your bell is either too big (where your glans partially slips out) or too small (where your glans barely fit half of itself inside), you get a sign where only half of your glans is or was under vacuum pressure. If the bell is too big, for me, I wrap base base of the glans with some TheraBand for friction and girth size filling purposes until I can "stuff" my glans into the bell without the accidental slip out. This is why we've been asking for smaller size fitments for the bell/cup.

If your bell/cup is too small, and you can barely squeeze your glans fully in, you need a more fitting bell. If it's a good size. make sure to turn the knob to retract as much of the internal lid far up as you can. Then twist the knob until the lid is only 1 full rotation from the top. Shove your glans in as far as you can, and ensure the glans remains perfectly inside the bell/cup, empty out as much air trapped between the bell/cup, glans, and the sleeve before turning the knob, then turn the knob to 1/2 to 3/4 rotation max. This will ensure your glans is fully inside the bell/cup at all time.

 

[thedudefather]

Makes perfect sense. I happens to me too. If your bell is either too big (where your glans partially slips out) or too small (where your glans barely fit half of itself inside), you get a sign where only half of your glans is or was under vacuum pressure. If the bell is too big, for me, I wrap base base of the glans with some TheraBand for friction and girth size filling purposes until I can "stuff" my glans into the bell without the accidental slip out. This is why we've been asking for smaller size fitments for the bell/cup.

If your bell/cup is too small, and you can barely squeeze your glans fully in, you need a more fitting bell. If it's a good size. make sure to turn the knob to retract as much of the internal lid far up as you can. Then twist the knob until the lid is only 1 full rotation from the top. Shove your glans in as far as you can, and ensure the glans remains perfectly inside the bell/cup, empty out as much air trapped between the bell/cup, glans, and the sleeve before turning the knob, then turn the knob to 1/2 to 3/4 rotation max. This will ensure your glans is fully inside the bell/cup at all time.

It fully covers my glans but only half gets the pressure

 

[oldandlively]

It fully covers my glans but only half gets the pressure

Got it. yes, that is common. When there is no gap between the side of the glans and the wall of the bell, as the vacuum pressure goes up, the glans expands into a mushroom. The larger surface area of the glans, compose mainly the half of the glands, will be subjected under the pressure. If the lower portion of the glans is sealed up inside the mouth of the bell, the rest of the pressure not exerted on the upper part of the glans, around 25%, will be exerted on the lower part of the glans through pressure leakage.

 

[thedudefather]

Got it. yes, that is common. When there is no gap between the side of the glans and the wall of the bell, as the vacuum pressure goes up, the glans expands into a mushroom. The larger surface area of the glans, compose mainly the half of the glands, will be subjected under the pressure. If the lower portion of the glans is sealed up inside the mouth of the bell, the rest of the pressure not exerted on the upper part of the glans, around 25%, will be exerted on the lower part of the glans through pressure leakage.

So i should get a larger bell?

 

[oldandlively]

So i should get a larger bell?

If the bell doesn't fit properly, then go up. If it fits and still gives you proper suction without causing any pain or discomfort, stay.

 

[thedudefather]

If the bell doesn't fit properly, then go up. If it fits and still gives you proper suction without causing any pain or discomfort, stay.

Understood. Gonna keep rocking it.