Best pump possible
ManPlan86 Routine and Progress
- Thread starter ManPlan86
- Start date
ManPlan86
Well-known member
All good, my brain works this way at times too.
Dont get me started talking about gardening or lawn maintenance! Especially now that snow is finally melting.
I see a lot PE and lawn mowing in my future.
Okay.
ManPlan86
Well-known member
It's maxed out now
Need a new pump. I suggest the MityvacIt's maxed out now
Youv about to fall in love
ManPlan86
Well-known member
Tracking on the new Mityvac shows it should be here by tomorrow, gettinbath mate. (flex)
I have been doing 5x5x3 with my bath mate Hydromax (no gauge). I do manual ok grip jelqing in front of a heater for warm up while my bath runs, then 5 minutes ssj, then jump in to the hot bath for the pumping and remainder of my 5x5x3 session.
I do this 3 times/week.
I go max pressure each time I go into the pump with as hard of an erection as I can each time.
Ok, to my Couple questions and hoping that @oldandlively @squirt_inducer_man or another brother can help answer. Mityvac is capable of higher pressures than the bath mate, any recomendations on where to start on pressure?
I have read a few other posts about setting baselines, alternate pumping with stepping up pressure each set, etc... I dont want to get over zealous and injure myself before I can build up a good routine since i am accustomed to pumping up to as max as i can get the bathmate.
I have been doing 5x5x3 with my bath mate Hydromax (no gauge). I do manual ok grip jelqing in front of a heater for warm up while my bath runs, then 5 minutes ssj, then jump in to the hot bath for the pumping and remainder of my 5x5x3 session.
I do this 3 times/week.
I go max pressure each time I go into the pump with as hard of an erection as I can each time.
Ok, to my Couple questions and hoping that @oldandlively @squirt_inducer_man or another brother can help answer. Mityvac is capable of higher pressures than the bath mate, any recomendations on where to start on pressure?
I have read a few other posts about setting baselines, alternate pumping with stepping up pressure each set, etc... I dont want to get over zealous and injure myself before I can build up a good routine since i am accustomed to pumping up to as max as i can get the bathmate.
Pump with water it's safer.
Start at 5 Hg and go up slowely maybe to 6 Hg or 7 Hg.
Man, we have MOS Spartans popping up everywhere now. I'm getting pumped, literally.
Baseline for MityVac using water should be the same for Bathmate to start. However, a warning. Slowly monitor as you go up in pressure starting at 5inHg. Why? Bathmate has a unique bleed off design at the top, where as MityVac cylinder is uniformed. Some may say the pressure differential is not significantly impacting, but when it comes to your penis, it is. Start at 1 to 2 inHg below the Bathmate baseline just for 1 full session and see. Then go up to Bathmate's baseline later the next day.
As for the second set of the routine, go up 2inHg at a time. Don't go overboard by leaping 3 to 5inHg. Monitor the pain threshold one full session at a time.
ManPlan86
Well-known member
Ok, I definitely plan to pump with warm water. I think it is better at equalizing pressure and is nice to stay warm during pump for the skin and internal penis.
I am guessing submerging the entire pump in bath water like I do with the bath mate is not good, any tips on filling it or just trial and error until I figure it out?
The water trap is tiny, so you need to be careful to not draw water inside the pump handle.
Fill the tube not all the way.
I'm standing up when I pump.
I will create a bigger water trap in a couple of months when my parts arrive.
ManPlan86
Well-known member
Ok, my challenge is that I dont know what pressure I am at in my current bath mate since it does not have a gauge. Maybe 5-7Hg...
Can you let me know if this sounds reasonable?
1st 5 minute set in pump go for 5Hg.
5 minutes SSJ
2nd 5 minute set in pump, work to 7Hg
5 minutes SSJ
3rd 5 minutes work to 7Hg and if feeling good, go no higher than 9Hg
I would say go no higher then 7 Hg in the beginning.
Start slow an feel the pressure.
Brother SIM is on point. If you just pump and did not use the hand pump for the Bathmate, that's around 4 to 5inHg on average. So you got it nailed for the first pump. But a warning, don't go crazy with the MityVac. Creep up from 3inHg first, and slowly to 5inHg. Take your time during that 5 minutes. While doing that first SSJ, feel the tension and post pumping pain. Do the same for the second and third set of pumping and SSJ. Monitor like a hawk.
Agree. I almost overdid it going up to 10 Hg.
Yep. I hear you brother. I delayed my routines by two weeks because I didn't feel any pain as I went up passing that 10 inHg mark too after getting my Bathmate. Huge mistake.
We need pressure for optimal growth. I have a rest now as well after this 10 Hg madness. I need to let it heal real good.
ManPlan86
Well-known member
That is exactly what I was worried about doing, so want to make sure I have a well planned start, stop and increase plan. A ManPlan...
Listen to your body and know your limits for yourself. Knowing you body is the smartest thing you need to do
Excellent
ManPlan86
Well-known member
First 5x5x3 pump session with the mityvac is in the books.
In all reality it was more like a 5x2x1 and 5x5x3 cause I screwed up on the first pump and lost all my pressure so started over.
I can already tell it is going to take some practice to get used to hydrpumping with it, but hopefully as practice makes perfect I can share my learnings with the brotherhood.
First full 5 min pump maintained at 5Hg, then went up to 7Hg for the second and third. Felt good overall, but didnt feel like I was getting same expansion as I do with the bath mate.
Struggled a little bit multitasking the connections and pump handle and had to rework up an erection a couple times so that could have been part of the expansion issue. Overall though no fluid retention and felt a lot more of an even pump throughout.
In all reality it was more like a 5x2x1 and 5x5x3 cause I screwed up on the first pump and lost all my pressure so started over.
I can already tell it is going to take some practice to get used to hydrpumping with it, but hopefully as practice makes perfect I can share my learnings with the brotherhood.
First full 5 min pump maintained at 5Hg, then went up to 7Hg for the second and third. Felt good overall, but didnt feel like I was getting same expansion as I do with the bath mate.
Struggled a little bit multitasking the connections and pump handle and had to rework up an erection a couple times so that could have been part of the expansion issue. Overall though no fluid retention and felt a lot more of an even pump throughout.
ManPlan86
Well-known member
Traveling for work this week, and was a bit nervous to pass through airport security with my mityvac, sillistretcher and sleeves nicely stowed in my carry on luggage. Thinking what questions am I going to get about this...?
Just passed through security and not even a blink from TSA about my PE gear. I did get a nice groin pat down for alerting in my "genital area". Haha
Wonder if my morning stretching before heading to the airport somehow caused some additional heat signature or something in my pants.
Just passed through security and not even a blink from TSA about my PE gear. I did get a nice groin pat down for alerting in my "genital area". Haha
Wonder if my morning stretching before heading to the airport somehow caused some additional heat signature or something in my pants.
Same happened to me heading down to Mexico for a vacation. Got quite a bit of stares by the ladies doing scan checks.
The commotion that are happening in these situations are insane.
ManPlan86
Well-known member
Just spent three days out of town with my wife. She knows I do "some morning stretching" but is not fully in the know of my PE work.
It has been a couple months since we have had full intercourse due to some health issues she has been having and other marriage struggles we are workingthrough.
We attempted sex and she said she couldn't get me in and it hurt. She requested I not get any bigger and that she thinks she cant handle it if I get bigger. Did eventually get in but by then the mood was killed and I blew my load pretty fast after not having sex for quite some time. I am currently at just under 5" EG at last measure.
Coming up on 1 year of pumping and girth work and started right at 4" EG last May.
Guess it's nice she noticed, but I am not to my goal of 8x6 so also a little disappointed to put work on hold. Just dont want to sacrifice sex life going forward and give her a reason to worry about sex.
Think I will move towards more of a cementing routine for a bit until she gets used to my size, and then pick up later after a break.
Any other advice?
It has been a couple months since we have had full intercourse due to some health issues she has been having and other marriage struggles we are workingthrough.
We attempted sex and she said she couldn't get me in and it hurt. She requested I not get any bigger and that she thinks she cant handle it if I get bigger. Did eventually get in but by then the mood was killed and I blew my load pretty fast after not having sex for quite some time. I am currently at just under 5" EG at last measure.
Coming up on 1 year of pumping and girth work and started right at 4" EG last May.
Guess it's nice she noticed, but I am not to my goal of 8x6 so also a little disappointed to put work on hold. Just dont want to sacrifice sex life going forward and give her a reason to worry about sex.
Think I will move towards more of a cementing routine for a bit until she gets used to my size, and then pick up later after a break.
Any other advice?
If you want to achieve the 6 girth, keep the pace or increase the intensity a bit more. While you're reaching toward 6, you are cementing 5. I stopped at 5 as well in the past because my wife said she was comfortable at that size. Learned my lesson. Don't stop.
It's the only way to be satisfied with your goals
ManPlan86
Well-known member
Amen!
ManPlan86
Well-known member
Have not updated progress recently, but I have continued daily during my lack of updates.
Loving the mityvac! 5x5x3 with normal schedule of 3 days on one day off.
1st start at 6Hg and slow creep up to 8Hg -9Hg. 2nd start at 7Hg go up to 10Hg. 3rd start at 6Hg go up to 10Hg and then depending on I'm feeling either hold at 10 until last minute or slowly reduce back down for remainder of a few minutes.
Observation of less fluid retention with mity vac, but dont feel as fat as I used to with the bathmate.
This morning I experimented with first two pumps as above, then jumped into shower and did 3rd pump with bath mate. Squeezed in a 4th pump after shower with mityvac up to 8Hg and then creeped back down. Seemed pretty fat afterwards and on 4th pump with mityvac I was starting to hit sides of cylinder.
At two hours now with C-ring on, so will see if expansion sticks around for the rest of the day.
Loving the mityvac! 5x5x3 with normal schedule of 3 days on one day off.
1st start at 6Hg and slow creep up to 8Hg -9Hg. 2nd start at 7Hg go up to 10Hg. 3rd start at 6Hg go up to 10Hg and then depending on I'm feeling either hold at 10 until last minute or slowly reduce back down for remainder of a few minutes.
Observation of less fluid retention with mity vac, but dont feel as fat as I used to with the bathmate.
This morning I experimented with first two pumps as above, then jumped into shower and did 3rd pump with bath mate. Squeezed in a 4th pump after shower with mityvac up to 8Hg and then creeped back down. Seemed pretty fat afterwards and on 4th pump with mityvac I was starting to hit sides of cylinder.
At two hours now with C-ring on, so will see if expansion sticks around for the rest of the day.
So good to hear you have not given up. I am also pleased with your progress....gotta love the MityVac
ManPlan86
Well-known member
I'm going to have to pull the trigger on an LM one of these days. My wife is a teacher so now out for summer break, so my time is a bit limited.
I'm able to get my 5x5x3 pumping in during the morning and sometimes in the afternoon depending on schedule. After pumping and C-ring work, I switch to sillistretcher for the day until bed or sleeve if I pump in afternoon.
Bless you
I was testing out Bathmate yesterday.
But it felt so dangerous with the VacuVin modification and no gauge.
MityVac is superior. You want to be able to monitor the vaccum pressure live, and be able to go up and down in pressure during your set. This is why MityVac is superior to any pump out there. I'm not just saying it, I strongly believe this. The button to reduce the vaccum pressure is very handy. Doesn't exist on any other system. On other systems you need 2 hands to operate the manual vaccum pump.
This is why I believe MityVac Hydro-Vac Penis Pump kit is the best.
ManPlan86
Well-known member
I agree, MityVac is much better than Bathmate.
It is my go to now, but still keeping the Bathmate around for when my time is short and I do not want to pass on getting pumping in. Like my post from above, I completed my third set of 5x5x3 in shower with bathmate so I wouldnt be late for work.
I feel I get a much more even pump with Mityvac, and my goal now is to encourage a uniform penis in width while still getting some length in the pump to stress the growth and healing with sillistretcher.
ManPlan86
Well-known member
Agreed. Curious to see what you and @oldandlively come up with. In my line of work, I come across different types of healthcare products and manufacturing supplies.
I have been snooping our manufacturing site to see if there is any type of containers that I can repurpose for a larger water trap.
ManPlan86
Well-known member
@squirt_inducer_man or @oldandlively , I currently am using the 2" Mityvac Cylinder. I know pumping primarily is a girth growth endeavor, and the 2" gives me 1/2" to almost 3/4" expansion depending on how strong my erection is when pumping.
As my time is a bit more limited now to fit both manual stretching and pumping in, what are your thoughts on me purchasing and using a 1.75" cylinder for first couple of pumps for 5x5x3 to push length work, then last session switching to 2"?
Is this worthwhile or a dumb idea?
As my time is a bit more limited now to fit both manual stretching and pumping in, what are your thoughts on me purchasing and using a 1.75" cylinder for first couple of pumps for 5x5x3 to push length work, then last session switching to 2"?
Is this worthwhile or a dumb idea?