Home made cock ring?
Get a rubber band and put it at the base. I Dont suggest doing this as it may be difficult to take off when you really need too. Or you can go buy you a oring gasket at any auto parts store.
T
templnite
Guest
You can just buy some hair bands, or the o ring luck said
ChilDsh;680764 said:You just have to be creative..at one time i was using a shoelace as a cock ring and worked pretty good.
I remember when I did this (cuz I was not patient enought to wait for the cockring from ebay to come)
And one time the shoelace got stuck pretty bad, dick getting purple-black I got scared, couldnt take it off even with scissors cuz the scissors were cutting my dick.
Man that was nightmare
BigBeardBig;680768 said:I remember when I did this (cuz I was not patient enought to wait for the cockring from ebay to come)
And one time the shoelace got stuck pretty bad, dick getting purple-black I got scared, couldnt take it off even with scissors cuz the scissors were cutting my dick.
Man that was nightmare
a shoelace getting stuck ???? wow
probably u tied the knot too tight ???
What I do is get different bands and use them to constrict the extreme base of my shaft. Single its gonna pich a lot, you'd better put some cloth material (or [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ACE Bandage[/words], be creattive) around the attachment point and then puth the band over it. It can either be elastic band or something you can rie around your penis. Be careful with the tightness though! There is a fine line between Recovering with a cock ring and CLAMPING.
C
ChilDsh
Guest
pogzee;680885 said:
Yeah it was probably too tight...never had this problem..pretty easy to use a shoelace
I have seen people use everything from shoe strings to velcro straps and actual metal hose clamps. personally I dont get much of anything out of C rings but if i was going to use one id go with a plain hair tie
B
BaddJack
Guest
theman6;680448 said:
The best home made cock ring is an infinitely adjustable 1 inch wide nylon strap.
I made one from the strap off a grocery shopping cart.
It included a black plastic buckle on one end.
I stitched a 3 inch length of the soft fuzzy velcro towards the buckle end and the hooked velcro at the end of the strap.
All you need to do is loop it, mark off where the hooked velcro will meet the strap (where the soft fuzzy will be stitched) when tightened down and looped around yer cock.
The nylon strap gets softer with use, lasts for years and is washable.
You can tell I've used mine for a while.
View attachment 31380
glad you stopped by, i thought u left us for those creeps at LPSGBaddJack;682551 said:
B
BaddJack
Guest
acromegaly;682575 said:
I agree, I've wasted too much time arguing with the mods with eternal PMS, a few friends tho.
Big Schwanz Acht
@Big Schwanz Acht
doublelongdaddy;683086 said:
on the rare occasion that I throw-on a CR...I use these
Big Schwanz Acht
@Big Schwanz Acht
cladre60;759225 said:
one does the trick for me
I got serious about PE when I found some very useful, wide rubber bands in the apartment that I was subrenting from a girl. I think these rubber rings are used for canning jars. Later I continued with hair ties. I worked for a long time with these things. I don't know how but back then the demands were quite low I guess.
A
AnthonyE
Guest
There are all kinds of ways to make one.. just make sure it isn't too tight and also use a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]penis health[/words] creme like Man1 Man Oil to avoid chafing and other skin irritations which are quite common. You can get this creme online.. good luck fellas.
Cock rings are very cheap and they hold the expansion securely than the home made cock rings.
doublelongdaddy;764383 said:
Do you have a picture of the ruber O rings?
Can't wait to get those simple looking o cock rings.
Yes, it can also be a sizing guide in a way. First you start with a smaller diameter and later on you need a bigger one, therefore making sense that growth has happened.
Only cock ring I think of making is the Ring of Power, as it's more utilitarian and All Day wear, if one wants so.
Not very practical for sexy times.
Making a cockring could mean making a mould and then casting it. One could mill steel or relevant material. But overall I don't favor steel or metal cockrings.
I prefer silicone in most rings, a good quality TPR comes second.
If I were to make my own cockring, I'd make a mould and use silicone for casting. Problem would be likely to find the best ratio of silicone, so that you get certain pliability but enough rigidness that it can hold your erection firmly.
And while silicone is nifty material, it can tear easily in certain mixtures.
World is full of choices. If one has tools, materials and the time (and skills :-D ), there are many possibilities.
I just hack saw and file my rods and put on some silicone tubing, Ring of Power, ta-dah!
Only cock ring I think of making is the Ring of Power, as it's more utilitarian and All Day wear, if one wants so.
Not very practical for sexy times.
Making a cockring could mean making a mould and then casting it. One could mill steel or relevant material. But overall I don't favor steel or metal cockrings.
I prefer silicone in most rings, a good quality TPR comes second.
If I were to make my own cockring, I'd make a mould and use silicone for casting. Problem would be likely to find the best ratio of silicone, so that you get certain pliability but enough rigidness that it can hold your erection firmly.
And while silicone is nifty material, it can tear easily in certain mixtures.
World is full of choices. If one has tools, materials and the time (and skills :-D ), there are many possibilities.
I just hack saw and file my rods and put on some silicone tubing, Ring of Power, ta-dah!
doublelongdaddy;764690 said:
Exactly.