My journey

G

Gladness_Night

New member
First of all, thank you for making sure everything arrived safely. I think I'll finally be able to start properly from tomorrow.

One thing I was wondering about: the Mityvac turned out to be much larger than I expected. Is it still okay to use, or could that be an issue?
Also, if you have a recommended routine for beginners, I'd really like to follow it exactly as you suggest. Since I'm completely new to this, I feel I could really benefit from the advice of someone who has invested a lot of time and experience into this.
I also couldn't find the Slow Squash Jelq video. Would it be possible for you to explain it in detail? I tried searching for it myself, but I haven't been able to find it anywhere.

Thank you so much again!


Bone pressed length 15.4cm
Girth It is usually 11~12 cm in circumference, but for some reason it is 13 cm in the middle.
 
I'm glad you're order came in. As far as a routine with what you have, you could look into the SRT routine. This will make very good use of your equipment. It is also fine to use the pump. Even though it may seem large, once you get in there, you'll expand like crazy. The slow squash jelq it's quite easy to do. You simply gripped at the base and below the head and bring those hands together to cause expansion.
 
DLD said:
I'm glad you're order came in. As far as a routine with what you have, you could look into the SRT routine. This will make very good use of your equipment. It is also fine to use the pump. Even though it may seem large, once you get in there, you'll expand like crazy. The slow squash jelq it's quite easy to do. You simply gripped at the base and below the head and bring those hands together to cause expansion.
Click to expand...
Thank you for sincere answer.

If you do not mind, would be so kind as to sugget some recommendable routine for using the Mity vac and length master?
 
SRT and 5x5x3 routines are under the Resoures tab above. Quite a few video links are broken because of the platform programming issues. We're working with the admins from the platforms to release new patches for us, and many other sites at the moment.

Videos for both length master and mityvac can be found at the shopping websites as well, under Videos.


Length Master (Look under Videos):

shop.mattersofsize.com

LengthMaster 3 - Penis Bundle Stretcher & Weight Hanging

The LengthMaster 3.0 is the worlds most advanced penis enlargement tool for intense internal and external penis stretching and hanging.Free Shipping in USA! EXTRACTING THE HIDDEN INNER PENISThe LengthMaster permanently extracts the hidden internal penis to achieve the quickest and most effective...
shop.mattersofsize.com shop.mattersofsize.com


MityVac (Look both under Instructions and Videos):

shop.mattersofsize.com

MityVac - Wet and Dry Penis Vacuum Pump System

After 15 years of research and development with the veterans of penis enlargement, MOS is proud to announce the MityVac HydroVac Penis Pump system.Whether you are just enlarging the penis or want to do full package pumping with your penis and testicles, the MityVac HydroVac offers a wide range...
shop.mattersofsize.com shop.mattersofsize.com
 
I was planning to use the pump today, but the gauge didn't move at all. When I tested it on my thigh, it seemed to create a seal and generate some vacuum, but the suction appeared to be very weak. I'm not entirely sure, but that's what it looked like. Do you think there might be a problem with the pump or the gauge?
Click to expand...
 
I also tested the pump by blocking the opening with my finger. In that case, the gauge moved normally. However, when I connect it to the cylinder, the gauge does not move at all.
I'm sorry for the trouble, but I'm not sure what I should do. It's a bit difficult for me to purchase a replacement right now, especially considering the customs duties and shipping costs. If there's any way to repair the unit or troubleshoot the issue.

I would really aprreciate any advice.
 
Last edited:
DLD said:
What pump are you using?
Click to expand...
Sorry for the very late reply.
I was actually trying to respond earlier, but suddenly the reply page showed a huge blank white screen with what looked like HTML tags and code instead of the normal text box. I thought it was some kind of error, so I decided to wait and try again later before replying.
Other than a small amount of air leakage, I haven't had any problems using it. It has been working fine for me.

I started at 3 inHg and have recently moved up to 5 inHg. Do you think it's okay to increase the pressure that quickly, or should I stick to the method that Brother Crayzed suggested?

C

Girth work Thread 'Crazyeds penis pump guide'

  • crazyed27
  • 8 inch average base girth condom cum discoloration edging educated effective enormous equipment erect erectile erection exercise exercises extender extreme flaccid foreskin gain gaining gains girth girth gains glans growth hands hanging hydro inches jelq jelqs larger length gains massive masturbate painful penis peyronies posts pump pumping question results routine sex short shower skin sleeve ssj stretch stretching suction supra slammers tender testicles thick vacutech vacuum veins wide workout wrap 阴茎增大
  • Replies: 159
  • Forum: Penis Pumping Forum
  • Like
  • Fire
  • Love
 
You always wanna continue increasing the pressure. By the amount that you can handle. So I think it's fine for you to go from three to five
 
DLD said:
You always wanna continue increasing the pressure. By the amount that you can handle. So I think it's fine for you to go from three to five
Click to expand...
Ideally, what vacuum range does SRT recommend? Around 8 inHg or 10 inHg?

I'm determined to do SRT properly this year. Once I complete that phase, I'd like to focus on length gains with the LengthMaster.
 
Gladness_Night said:
Sorry for the very late reply.
I was actually trying to respond earlier, but suddenly the reply page showed a huge blank white screen with what looked like HTML tags and code instead of the normal text box. I thought it was some kind of error, so I decided to wait and try again later before replying.
Other than a small amount of air leakage, I haven't had any problems using it. It has been working fine for me.

I started at 3 inHg and have recently moved up to 5 inHg. Do you think it's okay to increase the pressure that quickly, or should I stick to the method that Brother Crayzed suggested?

C

Girth work Thread 'Crazyeds penis pump guide'

  • crazyed27
  • 8 inch average base girth condom cum discoloration edging educated effective enormous equipment erect erectile erection exercise exercises extender extreme flaccid foreskin gain gaining gains girth girth gains glans growth hands hanging hydro inches jelq jelqs larger length gains massive masturbate painful penis peyronies posts pump pumping question results routine sex short shower skin sleeve ssj stretch stretching suction supra slammers tender testicles thick vacutech vacuum veins wide workout wrap 阴茎增大
  • Replies: 159
  • Forum: Penis Pumping Forum
  • Like
  • Fire
  • Love
Click to expand...

Actually, start at -4.5 to -5 inHg. Your internal pressure is around +4.5 inHg. Work slowly up at an increment of -0.5 inHg per week.
 
Gladness_Night said:
Ideally, what vacuum range does SRT recommend? Around 8 inHg or 10 inHg?
Click to expand...

No. You start out at -4.5 inHg, the natural state of internal pressure. Work slowly up -0.5 inHg every week to allow the internal and skin laters adopt the new pressure and get normalized. The one that gets the most beating is the sensitive glans. Go up very slowly. An example is, after you get up to -6.5 inHg, stay at -6.5 inhg for 30 seconds, go back down to -5.5 inHg for 60 seconds, and back up to -6.5 inHg. Up and down. When you achieve higher pressure, you follow the same dynamic pressure application. You can stay 60 seconds at high pressure, down to moderate pressure, and back to high every 60 seconds. We normally suggest every 30 seconds to prevent blistering, but once your skin is conditioned, 60 seconds is fine.

Gladness_Night said:
I'm determined to do SRT properly this year. Once I complete that phase, I'd like to focus on length gains with the LengthMaster.
Click to expand...

Once you're out of the newbie phase, keep your log in the Routines and Progress updated. We'll exam your progress along the way and provide suggestions.

Routines and Progress Forum

Post your current penis enlargement routines and progress reports in this forum. YOU MUST BE LOGGED IN TO VIEW THIS FORUM
mattersofsize.com
 
  • Like
Reactions: DLD
oldandlively said:
No. You start out at -4.5 inHg, the natural state of internal pressure. Work slowly up -0.5 inHg every week to allow the internal and skin laters adopt the new pressure and get normalized. The one that gets the most beating is the sensitive glans. Go up very slowly. An example is, after you get up to -6.5 inHg, stay at -6.5 inhg for 30 seconds, go back down to -5.5 inHg for 60 seconds, and back up to -6.5 inHg. Up and down. When you achieve higher pressure, you follow the same dynamic pressure application. You can stay 60 seconds at high pressure, down to moderate pressure, and back to high every 60 seconds. We normally suggest every 30 seconds to prevent blistering, but once your skin is conditioned, 60 seconds is fine.



Once you're out of the newbie phase, keep your log in the Routines and Progress updated. We'll exam your progress along the way and provide suggestions.

Routines and Progress Forum

Post your current penis enlargement routines and progress reports in this forum. YOU MUST BE LOGGED IN TO VIEW THIS FORUM
mattersofsize.com
Click to expand...
I've really got to quit adult entertainment. My erection quality has become quite poor. When using the Mity Vac, am I supposed to use it while fully erect?
Honestly, I didn't follow the rules and went a bit beyond the recommended 5. I got too impatient. I'll make sure to correct that.
Also, what exactly is the "newbie routine"? I think it involves a few jelqing exercises, but do you start using the Mity Vac together with it after about two weeks, or is that not how it works?

If you have any tips for quitting adult entertainment, I'd really appreciate it. Thank you!!
 
The way I got over pornography was making a dedication to God that this was evil and wrong. And I pray that the holy spirit would watch over me and protect me from those evil things. I have not watched pornography for over two years
 
oldandlively said:
No. You start out at -4.5 inHg, the natural state of internal pressure. Work slowly up -0.5 inHg every week to allow the internal and skin laters adopt the new pressure and get normalized. The one that gets the most beating is the sensitive glans. Go up very slowly. An example is, after you get up to -6.5 inHg, stay at -6.5 inhg for 30 seconds, go back down to -5.5 inHg for 60 seconds, and back up to -6.5 inHg. Up and down. When you achieve higher pressure, you follow the same dynamic pressure application. You can stay 60 seconds at high pressure, down to moderate pressure, and back to high every 60 seconds. We normally suggest every 30 seconds to prevent blistering, but once your skin is conditioned, 60 seconds is fine.



Once you're out of the newbie phase, keep your log in the Routines and Progress updated. We'll exam your progress along the way and provide suggestions.

Routines and Progress Forum

Post your current penis enlargement routines and progress reports in this forum. YOU MUST BE LOGGED IN TO VIEW THIS FORUM
mattersofsize.com
Click to expand...
oldandlively said:
No. You start out at -4.5 inHg, the natural state of internal pressure. Work slowly up -0.5 inHg every week to allow the internal and skin laters adopt the new pressure and get normalized. The one that gets the most beating is the sensitive glans. Go up very slowly. An example is, after you get up to -6.5 inHg, stay at -6.5 inhg for 30 seconds, go back down to -5.5 inHg for 60 seconds, and back up to -6.5 inHg. Up and down. When you achieve higher pressure, you follow the same dynamic pressure application. You can stay 60 seconds at high pressure, down to moderate pressure, and back to high every 60 seconds. We normally suggest every 30 seconds to prevent blistering, but once your skin is conditioned, 60 seconds is fine.



Once you're out of the newbie phase, keep your log in the Routines and Progress updated. We'll exam your progress along the way and provide suggestions.

Routines and Progress Forum

Post your current penis enlargement routines and progress reports in this forum. YOU MUST BE LOGGED IN TO VIEW THIS FORUM
mattersofsize.com
Click to expand...
First of all, I'd like to thank DLD and Old and Lively.

For now, I think I'll stop using the silicone sleeves. It seems like quite a bit of air is leaking out, even if only gradually. I'll try using the Mity Vac without the silicone sleeves and see how it goes.

I’ll probably stick to 5 inHg for about two weeks, then make a new post in the Routine and Progress Forum and start over properly this time.

Thank you very much for all your help.
 
Gladness_Night said:
First of all, I'd like to thank DLD and Old and Lively.

For now, I think I'll stop using the silicone sleeves. It seems like quite a bit of air is leaking out, even if only gradually. I'll try using the Mity Vac without the silicone sleeves and see how it goes.

I’ll probably stick to 5 inHg for about two weeks, then make a new post in the Routine and Progress Forum and start over properly this time.

Thank you very much for all your help.
Click to expand...
You're welcome. My brother. I suggest you stick with this. If you're doing well without the sleeve, I suggest you continue that way
 
You must log in or register to reply here.
Help Users

You haven't joined any rooms.

    You haven't joined any rooms.
    Back
    Top