SiliStretcher User Manual

This is all in the video section. There are videos for everything we do.
 
GritsNGravy said:
Am I the only one not understanding the instructions? I'm really excited to begin SRT but I wish the silistretcher came with a tutorial video as I can't find anything on here after reading for hours last night and today. I can't figure out how to get my penis inside the bell with the silisleeve attached.
Click to expand...

Let's break things down just a wee bit. Under the Media, you'll see Product Instruction Videos. Here's the SiliStretcher:
https://mattersofsize.com/media/albums/silistretcher-2-all-day-penis-vacuum-stretcher-and-weight-hanger.340/

Under Resources and Program forum's link, you have the list of all the products, the secrets, and the instruction.

Here's the link for behind the user's methods:

If you need additional assistance, there's a subforum that focuses mainly on the SiliStretcher as well:

If you are lost anyway, create a post there and we'll be glad to provide info for you.

GritsNGravy said:
I can't figure out how to get my penis inside the bell with the silisleeve attached.
Click to expand...

The SiliSleev is meant not to dangle while you put the penis inside. It's meant to be fold up or rolled up above the bell's edge. Better yet, It's better to put the sleeve below the base of the glans, and roll it up onto the bell after you shove your glans completely up the bell/cup. My suggestion is to get a bit of TheraBand (yellow color for 2.5lbs flex weight support), pretty cheap for a few bucks anywhere. That will be your ticket for preventing the sleeves from ripping and kinking, which will cause the pressure to be lost. This is a common development for ALL vacuum system. There's no way around it unless we come up with a new sleeve designs, which I already have, but no excecutions because of the lack of molds and ability to mix silicone mixtures for gradients.

GritsNGravy said:
I also can't find out how to put on the silicap?
Click to expand...

To put on the SiliCap (the terminal end cap) is to shove it far into the cup by retracting the suction lid. If you're talking about the SiliCap that looks like the shower cap for your penis, think of cap going ontop of a bald head. Make sure to create a larger vent hole at the top of the shower cap. If you need photos to differentiate the two, let us know.

GritsNGravy said:
The forums are harder to navigate than the other site I'm used to and typing in the search bar brings up any mention of the keyword so it's nearly impossible to find the specific answer I'm looking for. Is there a list of key/important forums pinned that I'm having trouble finding?
Click to expand...

Indicated in the links above. Resources and Program under the Forum list will give you the best info. Media section under Production Instruction will be your live demo.
 
oldandlively said:
Let's break things down just a wee bit. Under the Media, you'll see Product Instruction Videos. Here's the SiliStretcher:
https://mattersofsize.com/media/albums/silistretcher-2-all-day-penis-vacuum-stretcher-and-weight-hanger.340/

Under Resources and Program forum's link, you have the list of all the products, the secrets, and the instruction.

Here's the link for behind the user's methods:

If you need additional assistance, there's a subforum that focuses mainly on the SiliStretcher as well:

If you are lost anyway, create a post there and we'll be glad to provide info for you.



The SiliSleev is meant not to dangle while you put the penis inside. It's meant to be fold up or rolled up above the bell's edge. Better yet, It's better to put the sleeve below the base of the glans, and roll it up onto the bell after you shove your glans completely up the bell/cup. My suggestion is to get a bit of TheraBand (yellow color for 2.5lbs flex weight support), pretty cheap for a few bucks anywhere. That will be your ticket for preventing the sleeves from ripping and kinking, which will cause the pressure to be lost. This is a common development for ALL vacuum system. There's no way around it unless we come up with a new sleeve designs, which I already have, but no excecutions because of the lack of molds and ability to mix silicone mixtures for gradients.



To put on the SiliCap (the terminal end cap) is to shove it far into the cup by retracting the suction lid. If you're talking about the SiliCap that looks like the shower cap for your penis, think of cap going ontop of a bald head. Make sure to create a larger vent hole at the top of the shower cap. If you need photos to differentiate the two, let us know.



Indicated in the links above. Resources and Program under the Forum list will give you the best info. Media section under Production Instruction will be your live demo.
Click to expand...
Wow! Thanks my brother. We should make your post a sticky. So thorough. God bless you my Brother.
 
oldandlively said:
Let's break things down just a wee bit. Under the Media, you'll see Product Instruction Videos. Here's the SiliStretcher:
https://mattersofsize.com/media/albums/silistretcher-2-all-day-penis-vacuum-stretcher-and-weight-hanger.340/

Under Resources and Program forum's link, you have the list of all the products, the secrets, and the instruction.

Here's the link for behind the user's methods:

If you need additional assistance, there's a subforum that focuses mainly on the SiliStretcher as well:

If you are lost anyway, create a post there and we'll be glad to provide info for you.



The SiliSleev is meant not to dangle while you put the penis inside. It's meant to be fold up or rolled up above the bell's edge. Better yet, It's better to put the sleeve below the base of the glans, and roll it up onto the bell after you shove your glans completely up the bell/cup. My suggestion is to get a bit of TheraBand (yellow color for 2.5lbs flex weight support), pretty cheap for a few bucks anywhere. That will be your ticket for preventing the sleeves from ripping and kinking, which will cause the pressure to be lost. This is a common development for ALL vacuum system. There's no way around it unless we come up with a new sleeve designs, which I already have, but no excecutions because of the lack of molds and ability to mix silicone mixtures for gradients.



To put on the SiliCap (the terminal end cap) is to shove it far into the cup by retracting the suction lid. If you're talking about the SiliCap that looks like the shower cap for your penis, think of cap going ontop of a bald head. Make sure to create a larger vent hole at the top of the shower cap. If you need photos to differentiate the two, let us know.



Indicated in the links above. Resources and Program under the Forum list will give you the best info. Media section under Production Instruction will be your live demo.
Click to expand...
Oh wow! I guess I was just stuck on it being in the forums section and didn't even realized how much was in the resources section. Thanks!
 
GritsNGravy said:
Oh wow! I guess I was just stuck on it being in the forums section and didn't even realized how much was in the resources section. Thanks!
Click to expand...
Take a complete tour, their is 22 years of history here.
 
I'm really struggling to get consistent/proper vacuum. I've tried replicating what I see in the videos, but it's taking me dozens of attempts and once I get suction it often slips out within the hour. The silicap feels too big for me. My problem is getting it on without a gap at the end or excess air (My glans is much smaller/narrow compared to the video), and when I finally do get it on tight enough I end up with loose skin inside of it.
 
GritsNGravy said:
I'm really struggling to get consistent/proper vacuum. I've tried replicating what I see in the videos, but it's taking me dozens of attempts and once I get suction it often slips out within the hour.
Click to expand...

This happens as our penis shrinks. Don't worry. Take it through a calmer approach. My suggestion is to use the TheraBand layer around the base of the penis. This creates a good seal between the cup and the glan. It also boosts the gripping strength between the sleeve and the skin. I'm looking for the photos right now to provide to you rather than making a new instruction. We lost the media album link to these instruction photos during the last patch update. Such a pain.

GritsNGravy said:
The silicap feels too big for me. My problem is getting it on without a gap at the end or excess air (My glans is much smaller/narrow compared to the video), and when I finally do get it on tight enough I end up with loose skin inside of it.
Click to expand...

Don't use the silicap for now. Use a bit of a bathroom tissues to create a moisture removal at the top instead. When you wrap the TheraBand layer at the base of the glans, you can inflate the glans slightly (not too much or you'll get a blister) for better traction grip by the glans.
 
GritsNGravy said:
I'm really struggling to get consistent/proper vacuum. I've tried replicating what I see in the videos, but it's taking me dozens of attempts and once I get suction it often slips out within the hour. The silicap feels too big for me. My problem is getting it on without a gap at the end or excess air (My glans is much smaller/narrow compared to the video), and when I finally do get it on tight enough I end up with loose skin inside of it.
Click to expand...
Are you trying to mod your pump? Is that what you mean when you say replicate?
 
oldandlively said:
This happens as our penis shrinks. Don't worry. Take it through a calmer approach. My suggestion is to use the TheraBand layer around the base of the penis. This creates a good seal between the cup and the glan. It also boosts the gripping strength between the sleeve and the skin. I'm looking for the photos right now to provide to you rather than making a new instruction. We lost the media album link to these instruction photos during the last patch update. Such a pain.



Don't use the silicap for now. Use a bit of a bathroom tissues to create a moisture removal at the top instead. When you wrap the TheraBand layer at the base of the glans, you can inflate the glans slightly (not too much or you'll get a blister) for better traction grip by the glans.
Click to expand...
So do I just cut a thin piece of theraband and wrap my penis before using the silistretcher as normal?...and I've noticed this morning after only 3 uses there is a hole now in the silisleeve right above the bell.

And no, not modding anything, just trying to connect to it and having a low success rate.
 
GritsNGravy said:
So do I just cut a thin piece of theraband and wrap my penis before using the silistretcher as normal?
Click to expand...

Yes, you can trim down the TheraBand to a 6in or 8in length, around 1in in width. You can fold it from 1in width to 1/2in width to make it bulkier. I like mine to be a bit bulky to ensure pure traction between the base of the glans to the sleeve.

GritsNGravy said:
...and I've noticed this morning after only 3 uses there is a hole now in the silisleeve right above the bell.
Click to expand...

Sounds like the sleeve got folder under and suffered the traction tension. It's quite common when a finger nail and the hard cup's edge crease the silicone sleeve under high traction tension. @DLD can assist you on the replacement (if possible) with the sale staff.

GritsNGravy said:
And no, not modding anything, just trying to connect to it and having a low success rate.
Click to expand...

You will reach it. If you're not comfortable to post photos, no worries. If you are comfortable, post the wrapping method you have and we'll assist further.
 
  • Like
Reactions: DLD
oldandlively said:
You will reach it. If you're not comfortable to post photos, no worries. If you are comfortable, post the wrapping method you have and we'll assist further.
Click to expand...
I think if I shared a video that might be the fastest way to see what I'm doing wrong. Is there somewhere I can upload one that's not on the public forum?
 
GritsNGravy said:
I think if I shared a video that might be the fastest way to see what I'm doing wrong. Is there somewhere I can upload one that's not on the public forum?
Click to expand...

Since the video files may be big, capture the video, synch it with Google Photos, and share it privately if you like.
 
  • Like
Reactions: DLD
oldandlively said:
Sounds like the sleeve got folder under and suffered the traction tension. It's quite common when a finger nail and the hard cup's edge crease the silicone sleeve under high traction tension. @DLD can assist you on the replacement (if possible) with the sale staff.
Click to expand...
I was thinking of getting the power assist and I thought I remembered seeing something about getting 3 free sleeves with a certain order amount. Am I making this up or is that a thing?
 
GritsNGravy said:
I was thinking of getting the power assist and I thought I remembered seeing something about getting 3 free sleeves with a certain order amount. Am I making this up or is that a thing?
Click to expand...

If you're getting Power Assist, you might as well get the Length Master 3 in full. The Power Assist ring is great as an additional exercise buddy, but in reality, the Power Assist ring and the Length Master plates are the go-to combo.

As for the free sleeves, @DLD, mind verifying with Sheena on complimentary sleeves (I believe they are the DuroSleeves)?
 
oldandlively said:
If you're getting Power Assist, you might as well get the Length Master 3 in full. The Power Assist ring is great as an additional exercise buddy, but in reality, the Power Assist ring and the Length Master plates are the go-to combo.
Click to expand...
I just don't know if I could handle it yet honestly. I've been doing just the SRT beginner's length stretches along with wearing the silistretcher up to 4 hrs a day and I've been sore as it is. I've barely worked out 50% of the days in the past 4 weeks, so I don't know if I'm just not as conditioned as I thought I was or what, but I definitely feel it in the perineum. Yesterday it was even uncomfortable to sit down for several hours after. Am I wearing the silistretcher with too much tension or is this normal?
 
GritsNGravy said:
I just don't know if I could handle it yet honestly. I've been doing just the SRT beginner's length stretches along with wearing the silistretcher up to 4 hrs a day and I've been sore as it is. I've barely worked out 50% of the days in the past 4 weeks, so I don't know if I'm just not as conditioned as I thought I was or what, but I definitely feel it in the perineum. Yesterday it was even uncomfortable to sit down for several hours after. Am I wearing the silistretcher with too much tension or is this normal?
Click to expand...

It does sound like as if you are stretching the poor thing pretty hard and for pretty long. Ease up a bit.
 
  • Like
Reactions: DLD
oldandlively said:
It does sound like as if you are stretching the poor thing pretty hard and for pretty long. Ease up a bit.
Click to expand...
Sometimes a less aggressive workout may work for many men. Explore your intensity and see what is best for you this may take some time to get there but definitely worth the investment
 
Alrighty. What about the sleeves deal? Wasn't there an offer for bonus sleeves with orders or something like that? Two of mine are way too big and one of the correct sizes already got a hole in the first week.
 
GritsNGravy said:
Alrighty. What about the sleeves deal? Wasn't there an offer for bonus sleeves with orders or something like that? Two of mine are way too big and one of the correct sizes already got a hole in the first week.
Click to expand...

According to the Shop website, Spend $100 and get 3 free SiliSleeves, 7/8in diameter in size, simply by adding them in the cart. My suggestion is to purchase the ones that fit you best, and make a notation on whether or the free sleeves you want is the SiliSleev #2 or #5. Before you pay, do take heed if those three sleeves are fully discounted during purchase as you check out the cart.
 
  • Like
Reactions: DLD
oldandlively said:
According to the Shop website, Spend $100 and get 3 free SiliSleeves, 7/8in diameter in size, simply by adding them in the cart. My suggestion is to purchase the ones that fit you best, and make a notation on whether or the free sleeves you want is the SiliSleev #2 or #5. Before you pay, do take heed if those three sleeves are fully discounted during purchase as you check out the cart.
Click to expand...
I added 19mms with a Lengthmaster to the cart but it doesn't work. Is it only for the 7/8s? Unfortunately, those are too big for me. I've tried wearing them several times and my head slips out and it just shrivels within the sleeve.
 
You must log in or register to reply here.
Back
Top