Size Doctor

[FullBloodArab]

Any plans on them making a full base instead of the half base i am really interested in getting a sizedoctor but i am not able to wear an extender in the up position i have tried it with extenders before and it's just not comfortable for me

Your planning to wear it downwards with pants on or at home privately? And what is your stretched size?

If at home privately then 90 degree works fine and maybe slightly under that works to.

But if you wear it fully downwards outdoor under your pants this does not work with the sd. But even if it does, then I think you will get problems with practical usage.

 

[DLD]

Any plans on them making a full base instead of the half base i am really interested in getting a sizedoctor but i am not able to wear an extender in the up position i have tried it with extenders before and it's just not comfortable for me

That’s a good point and I will bring that up with lightning and see if something can be modified in this way. We saw it as a complete advantage of not having a ring at the base so there is no pressure on the testicles but I’m sure with some work we can get our normal ADS base on to a sizedoctor

 

[hunghorse]

I've tried using the size doctor without the sleeves and I keep slipping out. Not sure if I'm doing something wrong?

 

[DLD]

I've tried using the size doctor without the sleeves and I keep slipping out. Not sure if I'm doing something wrong?

Why no sleeve?

 

[REDZULU2003]

I've tried using the size doctor without the sleeves and I keep slipping out. Not sure if I'm doing something wrong?

You should use the sleeves. Explain how you setup.

 

[FullBloodArab]

I've tried using the size doctor without the sleeves and I keep slipping out. Not sure if I'm doing something wrong?

I don't know the reason why you left out the sleeve but try a smaller number fixing band. There are 6 of them I believe.

What is your erection size and the size you began to stretch on the extender?

Because in the beginning there shouldn't be slippage because of the low tension. Don't skip a couple of weeks and add rods. Let the penis get used to it and start as recommended for two weeks slow tension (that's a tension that you won't feel a hard stretch)

In this two weeks your pens wil adapt and in this tow weeks you will learn the behaviour of the penis in your extender so you can figure out what's best for you.

Every PE device the first time everyone thinks what the hell is this thing. But after a week they have phd. Knowledge of the device.

So I think your starting length of the device is wrong. Take a closer look on that

 

[DLD]

I don't know the reason why you left out the sleeve but try a smaller number fixing band. There are 6 of them I believe.

What is your erection size and the size you began to stretch on the extender?

Because in the beginning there shouldn't be slippage because of the low tension. Don't skip a couple of weeks and add rods. Let the penis get used to it and start as recommended for two weeks slow tension (that's a tension that you won't feel a hard stretch)

In this two weeks your pens wil adapt and in this tow weeks you will learn the behaviour of the penis in your extender so you can figure out what's best for you.

Every PE device the first time everyone thinks what the hell is this thing. But after a week they have phd. Knowledge of the device.

So I think your starting length of the device is wrong. Take a closer look on that

You’re so right and I’m endorsing this myself because every other person that gets a lengthmaster (or any other tool) will become very frustrated for the first few days as they are rushing of the learning process. Tools take time to understand and to master. In every case within a week they have mastered it and they come back and give positive reviews.

 

[hunghorse]

Lol - no worries guys I’ll mess around with this thing and figure it out. I didn’t know the fixing bands had different diameters. I just received the silicap today so now I can try it the MOS way. Thanks for the heads up

 

[DLD]

Lol - no worries guys I’ll mess around with this thing and figure it out. I didn’t know the fixing bands had different diameters. I just received the silicap today so now I can try it the MOS way. Thanks for the heads up

No problem and it’s a good heads up to have especially for guys that really do have problems getting used to equipment. I look forward to you having a awesome gaining experience

 

[Super]

Cant get this to work no matter what, the glands keep slipping out because when you take the pump off to close the valve the automatically lets it out.

 

[Lightning]

Cant get this to work no matter what, the glands keep slipping out because when you take the pump off to close the valve the automatically lets it out.

Did you watch the instructional video? That's what the wire clip is for on the end of the bulb. You have to pump and then put the wire clip in place. It's a safety to prevent what is happening.

 

[Super]

Yes I watched the video, but now the bulb has stopped working and it seems clogged. It wont suck air. I pulled out the silver valves to see if there was any obstruction and I dont see any. Frustrated.

 

[Lightning]

Yes I watched the video, but now the bulb has stopped working and it seems clogged. It wont suck air. I pulled out the silver valves to see if there was any obstruction and I dont see any. Frustrated.

Are you talking about the grey vacuum pump bulb or the sizedoctor plastic bulb? The black plastic adapter has to be attached to the grey bulb.

 

[Super]

Yes the grey vacuume bulb, I have the black adapter attached.

 

[Lightning]

Yes I watched the video, but now the bulb has stopped working and it seems clogged. It wont suck air. I pulled out the silver valves to see if there was any obstruction and I dont see any. Frustrated.

We are shooting a better video of close ups in the am. It will be explained in better detail.

 

[Lightning]

Yes the grey vacuume bulb, I have the black adapter attached.

Make a video on your phone and post it here. You can upload videos right into posts. Click the video icon in the editor next to smilies and shoot the video directly into the post.

 

[FullBloodArab]

Cant get this to work no matter what, the glands keep slipping out because when you take the pump off to close the valve the automatically lets it out.

Sometimes this happens. If I know what you mean.

Pul the fixingband off, then insert your finger inside and click the valve (the white plastic part) in place tightly from the inside. Sometimes the valve gets loose.

Then try again

 

[Super]

Whats the fixing band?

 

[FullBloodArab]

Whats the fixing band?

 

[Super]

Sometimes this happens. If I know what you mean.

Pul the fixingband off, then insert your finger inside and click the valve (the white plastic part) in place tightly from the inside. Sometimes the valve gets loose.

Then try again

Have you gotten to use yours and is it working for you? I still have not gotten to work