silistretcher not giving me soreness

JustGrow said:

Why not continue manual stretches for 10 to 15 minutes and then hanging with light weight for the healing process for the next hour like you are doing.

Click to expand...

This may be a smart introduction into this. But I want to really emphasize that the penis will not always feel sore after a workout. The soreness as it will dissipate and eventually disappear for good.

Lightning said:

Do you have the Blue Sleeves or the Transparent Duros? The Duros are made for heavier weight and tension. The blue sleeves were originally intended for anti-turtling and pumping then were originally used for the first edition SiliStretcher.

Click to expand...

But the duros are very hard to keep on right.. then what to do. Can any one suggest alternate to ssillicap ..
Thank u

Mywish said:

But the duros are very hard to keep on right.. then what to do. Can any one suggest alternate to ssillicap ..
Thank u

Click to expand...

@Mywish what are you trying to achieve with Silicap or what is the issue you are having with Silicap?
Putting a small pinhole or cut (slit) on the tip of the Silicap may prevent fluid build up or slippage of Silicap.
Also try rolling it on the glans like a condom instead of pulling it over.
There is another Silipad (Silipad2) that is going to be coming out soon that may eliminate the use of the Silicap.

The duros are not difficult to keep on right.
What are you struggling with?

REDZULU2003 said:

The duros are not difficult to keep on right.
What are you struggling with?

Click to expand...

Same ?

JustGrow said:

@Mywish what are you trying to achieve with Silicap or what is the issue you are having with Silicap?
Putting a small pinhole or cut (slit) on the tip of the Silicap may prevent fluid build up or slippage of Silicap.
Also try rolling it on the glans like a condom instead of pulling it over.
There is another Silipad (Silipad2) that is going to be coming out soon that may eliminate the use of the Silicap.

Click to expand...

I should try to keep a pinhole on the top of the sillicap....
It's difficult to rool like a condom.
I'm (cut not xatly) bt my foreskin moves freely top to last (completely behind the glans). That's what making the problem while using the silicap ( infact the glans is sour and I cld see a lil blisters , water retention and lil swelling beneath the glans ..,that's making me uncomfortable ..

Silipad 2 I shld wait fr few other products to come brothers..cause it had to be shipped to India..?...

REDZULU2003 said:

The duros are not difficult to keep on right.
What are you struggling with?

Click to expand...

I feel its lil hard to use the duros..I'm having trouble using it ..
Can some one show me a link to see any video if available to see how to ,
using the duros on real penis (not the dildo)..
Thank you

I am not sure if we have a video of this. Maybe @Lightning may know different. If not I’m sure somebody could make one.

edit added 10/10/19
If you want additional comfort or have fluid issues on the tip of the glans when using SiliStretcher - All Day Penis Vacuum Stretcher and Weight Hanger try using absolute water proof tape on the tip of the glans to cover urethra.
Cut about 1 inch of tape and apply it to the tip of urethra. Start at bottom of glans where frenelum meets glans and then tape up to cover urethra. You may need less or more tape.
**********Warning********** make sure before you apply the cut piece of tape to glans that you apply it to your hand and pull off multiple times. What you are doing is removing some of the adhesive before applying to glans or when you take it off you may hurt yourself.

After you apply the tape apply the Silicap.




The white round piece you notice I picked up at Walmart, but I’m sure you can find it Walgreens, CVS, etc. It is a round sponge for make up...LOL
Take the round sponge and cut it to size so that it fits inside Silipad2.
When you enter the Silistretcher push glans into the sponge. Read on.



I hope this will helps.

Ensure you have put a small pinhole in the Silicap or cut a small slit on the tip of Silicap a few millimeters to help minimize fluid build up on the tip of glans.
Roll Silicap like this then roll onto the glans like a condom.
Hold any foreskin from going forward so it is not trapped under Silicap.
If forskin get a bit trapped under Silicap,
pull Silicap slightly up on edge and pull foreskin back a bit at a time.
After Silicap is on you can also put paper tape once around the bottom edge of the Silicap to prevent fluid retention on the glans where the shaft meets.
Notice I said over the Silicap.
If you are sensitive to adhesive this will prevent it from being directly over the skin.




For Duros with Silistretcher this is what I do,
Put Silipad in Silistretcher
and twist on piston until it stops don’t overtighten
Now turn left 1/2 turn
Put Duro onto Silistretcher



Then fold Duro sleeve from bottom outward about 1/2 inch then again and again about 3 times until Duro looks like a donut



Take donut and roll over Silistretcher one more time so that it is over the lip of Silistretcher cup.


Insert penis with Silicap on into Silistretcher.
Press into Silipad really good with glans.
Make sure you pull forskin back towards testicles, so it doesn’t get caught in the duro.
Now roll donut down onto the shaft and keep rolling until it is completely unrolled.



Adjust slightly and turn piston 1/4 to 1/2 turn to the right.

You should now be set to attach to the belt or to the Silistrap.
I prefer the Silistrap with Silistretcher pointing up towards chest.

Just be patient and keep trying.

Thank you brother...
Bt duro sleeve is hard to roll back and keep the glans in the stretcher and again pulling back the sleeve too.
Bt vil give a try for it ..today or tomorrow very soon .

When you are rolling the Duro back down from the Silistretcher to shaft hold Silistretcher and penis with one hand and roll with other hand.
At first you might find it difficult but it will get easier.

JustGrow said:

I hope this will help.

Roll Silicap like this then roll onto the glans like a condom.
Hold any foreskin from going forward so it is not trapped under Silicap.
If forskin get a bit trapped under Silicap,
pull Silicap slightly up on edge and pull foreskin back a bit at a time.
View attachment 1822384

For Duros with Silistretcher this is what I do,
Put Silipad in Silistretcher
and twist on piston until it stops don’t overtighten
Now turn left 1/2 turn
Put Duro onto Silistretcher

View attachment 1822385

Then fold Duro sleeve from bottom outward about 1/2 inch then again and again about 3 times until Duro looks like a donut
View attachment 1822386


Take donut and roll over Silistretcher one more time so that it is over the lip of Silistretcher cup.
View attachment 1822387

Insert penis with Silicap on into Silistretcher.
Press into Silipad really good with glans.
Make sure you pull forskin back towards testicles, so it doesn’t get caught in the duro.
Now roll donut down onto the shaft and keep rolling until it is completely unrolled.
View attachment 1822388
View attachment 1822389

Adjust slightly and turn piston 1/4 to 1/2 turn to the right.

You should now be set to attach to the belt or to the Silistrap.
I prefer the Silistrap with Silistretcher pointing up towards chest.

Just be patient and keep trying.

Click to expand...

I can't for the life of me see how it's so difficult. The dildo is same principle to a penis, watch carefully, and think how condoms get applied.

@Mywish Were you able to get the duros to work for you?

JustGrow said:

@Mywish Were you able to get the duros to work for you?

Click to expand...

Yes bro bt ..wearing the ADS is not that easy ..its painfull too ..
Cldnt use it for longer time continuously..
Duros I cut the length of it to use it

The Silistrap made a big difference for me.

Are you applying a lot of tension?

Also maybe order the softer sleeves instead of using the duros.

Where are you feeling pain or discomfort?

How long did you try to wear?

I usually only wear it for about an hour at a time and then check things out.

Mywish said:

Yes bro bt ..wearing the ADS is not that easy ..its painfull too ..
Cldnt use it for longer time continuously..
Duros I cut the length of it to use it

Click to expand...

If you have pain, you are using it wrong. If you are new to PE, your penis may be very sensitive and you need to pre-condition your penis by slowly advancing time used, tension and/or weight over the course of a few weeks.

Start by applying the SiliStretcher with light tension and wearing an hour a day for a week. Week two, start slowly increasing the hours worn until you can get up to a few hours. By week 3 or 4 you should be wearing it 6 hours a day no problem. Then start applying tension slowly every week after.

The DuroSleevs will eventually break in and once you get into the groove of using them, it will be a natural thing.

Lightning said:

If you have pain, you are using it wrong. If you are new to PE, your penis may be very sensitive and you need to pre-condition your penis by slowly advancing time used, tension and/or weight over the course of a few weeks.

Start by applying the SiliStretcher with light tension and wearing an hour a day for a week. Week two, start slowly increasing the hours worn until you can get up to a few hours. By week 3 or 4 you should be wearing it 6 hours a day no problem. Then start applying tension slowly every week after.

The DuroSleevs will eventually break in and once you get into the groove of using them, it will be a natural thing.

Click to expand...

I can attest to this methodology...
...I wore mine too much the first day I used it and developed a severe blister and it set me back a week so far.

The following times in this thread can be applied to the silistretcher

Lots of good feedback I hope it helps you my brother. One starting out with a new device it’s important to be patient with yourself as you learn, and as you’ve done come to the forum lots of good feedback.