Mityvac, what size to chose?

Day.

Member
Registered
Joined
Jan 22, 2024
Messages
54
I’m going to buy a MityVac - Wet and Dry Penis Vacuum Pump System as my bath mate isn’t working properly, I’m not sure what size to purchase? My bath mate was the x40 extreme so there was plenty of room. My current measurements are 7.9” bpel and 5.1” mseg. I want something that I can grow into and not out grow too early, I normally finish my Girth program (SRT 5x5x3) at 6.1” mseg and 6.7 base girth.
Thanks lads any advice would be appreciated
 
It's based on what the objective you're reaching, including your EQ. If your EQ is no problem coming in and going out of the Bathmate after the routines, you can just get the larger diameter cylinder. If you're having EQ issues, go for a cylinder that is just barely above your MSEG to retain rigidity during initial pumping sets, and go for the larger ones for the extreme expansion on the latter sets.

If you're looking for length as well, make sure to always stay 2in above your BPEL. Since you're at 7.9in, and thinking of going into 10in in the future days, stay ahead by getting a cylinder that is 12in tall/long. You're already in the golden length zone, so an 10in long cylinder is more than enough, but our eyes and hunger for longer penis will never cease.

So, the main game plan is:
- Going into the cylinder at 5.1in girth, the next size up is 1.75in cylinder. So, specifically, a 12inx1.75in cylinder is your current needs. This will expand your girth to 5.3in-ish coming out, holding your EQ in full strength and more. Having a 12inx2.25in cylinder to follow up will hyper expand your penis. Get a 12inx2.5in later when your penis finally catches up on the expansion.

- If you don't need to worry about your EQ, then 12inx2.25in cylinder to achieve your 7in girth at the end, creating uniform penis from bottom to top. If you want to exceed 7in, 12inx2.5in is your go to cylinder.

Think carefully of what you need. My current layout is a 1.75in cylinder (gotten pretty tight after 1 pumping set), a 2in cylinder (for pumping 2 sets), with the 2.25in cylinder (for the final 2 sets), and a 2.5in cylinder on standby for days down the road. My Bathmate is the 2.65in to end it all.
 
Tha
It's based on what the objective you're reaching, including your EQ. If your EQ is no problem coming in and going out of the Bathmate after the routines, you can just get the larger diameter cylinder. If you're having EQ issues, go for a cylinder that is just barely above your MSEG to retain rigidity during initial pumping sets, and go for the larger ones for the extreme expansion on the latter sets.

If you're looking for length as well, make sure to always stay 2in above your BPEL. Since you're at 7.9in, and thinking of going into 10in in the future days, stay ahead by getting a cylinder that is 12in tall/long. You're already in the golden length zone, so an 10in long cylinder is more than enough, but our eyes and hunger for longer penis will never cease.

So, the main game plan is:
- Going into the cylinder at 5.1in girth, the next size up is 1.75in cylinder. So, specifically, a 12inx1.75in cylinder is your current needs. This will expand your girth to 5.3in-ish coming out, holding your EQ in full strength and more. Having a 12inx2.25in cylinder to follow up will hyper expand your penis. Get a 12inx2.5in later when your penis finally catches up on the expansion.

- If you don't need to worry about your EQ, then 12inx2.25in cylinder to achieve your 7in girth at the end, creating uniform penis from bottom to top. If you want to exceed 7in, 12inx2.5in is your go to cylinder.

Think carefully of what you need. My current layout is a 1.75in cylinder (gotten pretty tight after 1 pumping set), a 2in cylinder (for pumping 2 sets), with the 2.25in cylinder (for the final 2 sets), and a 2.5in cylinder on standby for days down the road. My Bathmate is the 2.65in to end it all.
 
It's based on what the objective you're reaching, including your EQ. If your EQ is no problem coming in and going out of the Bathmate after the routines, you can just get the larger diameter cylinder. If you're having EQ issues, go for a cylinder that is just barely above your MSEG to retain rigidity during initial pumping sets, and go for the larger ones for the extreme expansion on the latter sets.

If you're looking for length as well, make sure to always stay 2in above your BPEL. Since you're at 7.9in, and thinking of going into 10in in the future days, stay ahead by getting a cylinder that is 12in tall/long. You're already in the golden length zone, so an 10in long cylinder is more than enough, but our eyes and hunger for longer penis will never cease.

So, the main game plan is:
- Going into the cylinder at 5.1in girth, the next size up is 1.75in cylinder. So, specifically, a 12inx1.75in cylinder is your current needs. This will expand your girth to 5.3in-ish coming out, holding your EQ in full strength and more. Having a 12inx2.25in cylinder to follow up will hyper expand your penis. Get a 12inx2.5in later when your penis finally catches up on the expansion.

- If you don't need to worry about your EQ, then 12inx2.25in cylinder to achieve your 7in girth at the end, creating uniform penis from bottom to top. If you want to exceed 7in, 12inx2.5in is your go to cylinder.

Think carefully of what you need. My current layout is a 1.75in cylinder (gotten pretty tight after 1 pumping set), a 2in cylinder (for pumping 2 sets), with the 2.25in cylinder (for the final 2 sets), and a 2.5in cylinder on standby for days down the road. My Bathmate is the 2.65in to end it all.
Thanks for the detailed reply. I’m happy with my current length and I’m focusing on gaining girth. Would you stilll go for the 12” length? I was thinking of going for a 2.25 or 2.5 because I want as much girth gains as possible, or is this too bigger size?
Thanks again, much appreciated brother
 
If you are going only for girth, 12in length by 2.25in and 2.5in cylinders are good if you have no EQ issues from the Bathmate pump. If you do have issues with EQ after pumping, stick with 2in and 2.25 for now. You can even try 2in and 2.5in to anticipate fast future growths.

Since MoS Shop only have 9in and 12in length by variety of diameters. During high vacuum, you'll gain about 1in to 1.5in of length, putting you into 8.1in to 8.5in. 0.5in of headspace is not something you want to have.
 
If you are going only for girth, 12in length by 2.25in and 2.5in cylinders are good if you have no EQ issues from the Bathmate pump. If you do have issues with EQ after pumping, stick with 2in and 2.25 for now. You can even try 2in and 2.5in to anticipate fast future growths.

Since MoS Shop only have 9in and 12in length by variety of diameters. During high vacuum, you'll gain about 1in to 1.5in of length, putting you into 8.1in to 8.5in. 0.5in of headspace is not something you want to have.
I can check out if we're able to create a 12" tube. But I am not sure if this is necessary for most. 12 inches is amazing but this will take consistent work and an eye to increase intensity constantly.
 
If you are going only for girth, 12in length by 2.25in and 2.5in cylinders are good if you have no EQ issues from the Bathmate pump. If you do have issues with EQ after pumping, stick with 2in and 2.25 for now. You can even try 2in and 2.5in to anticipate fast future growths.

Since MoS Shop only have 9in and 12in length by variety of diameters. During high vacuum, you'll gain about 1in to 1.5in of length, putting you into 8.1in to 8.5in. 0.5in of headspace is not something you want to have.
Just ordered a 12” by 2.5”. Thanks for your wise input and time, I’m looking forward to finally having a gauge. Cheers lads
 
Just ordered a 12” by 2.5”. Thanks for your wise input and time, I’m looking forward to finally having a gauge. Cheers lads
Did You buy from the store?
 
Did You buy from the store?
Yeh I did, 3 free silileeves so I’m happy, thanks mate
 
Yeh I did, 3 free silileeves so I’m happy, thanks mate
Awesome 👌
 
Back
Top Bottom