Just can’t get the LM to work

simmrast · Aug 9, 2023

I recently got the Lenghtmaster and was really excited to get to work and take my gains to the next level!

I’ve been at it now for 3 days and just can’t find a way to make it work for me. I either almost slip out of the device, the device pinches my skin or presses againt on my glans and gives me great pain. I’ve tried several different wrapping methods everything from my own that I’ve been using for a long time when hanging (with another pe product) to a couple of wrapping methods that I have seen here on the forum.

The biggest issue seems to be that it doesn’t grab ahold of the tissue but my skin - it feels like I just bought a very expensive skin stretcher. From what I can see and feel is that when I put on the device my skin rolls forward and my glans get pushed and pressed against or into the chamber, so it’s grabbing the skin rather then my grabbing the tissue and that’s not how you grow a big penis.

Because of this I haven’t even been able to perform one single session.
So now I’m reaching out for some guidance - if any of you have some suggestions I would be so glad if you can share it with me 😊

squirt_inducer_man · Aug 9, 2023

simmrast said:
I recently got the Lenghtmaster and was really excited to get to work and take my gains to the next level!

I’ve been at it now for 3 days and just can’t find a way to make it work for me. I either almost slip out of the device, the device pinches my skin or presses againt on my glans and gives me great pain. I’ve tried several different wrapping methods everything from my own that I’ve been using for a long time when hanging (with another pe product) to a couple of wrapping methods that I have seen here on the forum.

The biggest issue seems to be that it doesn’t grab ahold of the tissue but my skin - it feels like I just bought a very expensive skin stretcher. From what I can see and feel is that when I put on the device my skin rolls forward and my glans get pushed and pressed against or into the chamber, so it’s grabbing the skin rather then my grabbing the tissue and that’s not how you grow a big penis.

Because of this I haven’t even been able to perform one single session.
So now I’m reaching out for some guidance - if any of you have some suggestions I would be so glad if you can share it with me 😊

Look in these threads:
🔗 Slippage solutions.

🔗 SIM's videos and instructions.
(In this thread there are many videos in how to wrap).

Hope this helps.

orgasmic19 · Aug 9, 2023

It took me a while to figure it out to, but it actually works when you have a decent wrap.

Make sure you are attaching to the mid shaft or base and you are clamping all the way down.

Make sure you are using the Therebands that come with LengthMaster - Penis Bundle Stretcher & Weight Hanging it makes a big difference. I currently use two therabands for comfort.

simmrast · Aug 9, 2023

squirt_inducer_man said:
Look in these threads:
🔗 Slippage solutions.

🔗 SIM's videos and instructions.
(In this thread there are many videos in how to wrap).

Hope this helps.

I have watched your great videos before writing my post and tried it but still no luck unfortunatly. But I will watch them again and try until I succeed. Maybe my wrapping is a bit to thick still.

Really want to get into bundled stretching especially BTC that you have fantastic videos showing how it’s done. So I hope I can make the LengthMaster - Penis Bundle Stretcher & Weight Hanging to work for me.

simmrast · Aug 9, 2023

orgasmic19 said:
It took me a while to figure it out to, but it actually works when you have a decent wrap.

Make sure you are attaching to the mid shaft or base and you are clamping all the way down.

Make sure you are using the Therebands that come with LengthMaster it makes a big difference. I currently use two therabands for comfort.

Thank you for your tips! I will try with 2 therebands instead of only one and also clamp down a bit further down the shaft.
I’m just afraid clamping down to far down will not give me a good overall stretch.

squirt_inducer_man · Aug 9, 2023

simmrast said:
I have watched your great videos before writing my post and tried it but still no luck unfortunatly. But I will watch them again and try until I succeed. Maybe my wrapping is a bit to thick still.

Really want to get into bundled stretching especially BTC that you have fantastic videos showing how it’s done. So I hope I can make the LM to work for me.

You will make it work. If you need guidance just ask me. I have a lot of tips and tricks related to the LengthMaster 3 - Penis Bundle Stretcher & Weight Hanging. I have the dimensions of both the Thera-Band® and the bandage in my video instructions. Try to follow these.

Also if your flaccid is not that long (me in the beginning = I struggle a lot = reason to create these video instructions), you can use a bandage to tie away your scrotum during the wrapping. You can also wind the first Thera-Band® without pulling back your foreskin. After you have winded the second Thera-Band® on your penis, you can then pull back the foreskin with one of your hand and then wind the bandage on. Then comes the PENIS WRAPPING TAPE. This is to keep your foreskin retracted during the clampdown, and keep the forskin outside of the wrap.

The first piece of Thera-Band® you should have on a paper roll so it's easier to wind it on your penis. You don't want creases or wrinkles for the first layer of Thera-Band®. The second is not as important. The second Thera-Band® is only to cover the inner base of your penis.

When you attach in the chamber you should hold on your glans so you push as much blood from it as possible. You don't want to attach in the chamber, semi-erected.

I hope this helps. Just ask if you need more guidance.

squirt_inducer_man · Aug 9, 2023

@simmrast, look at this video instruction:
🔗 Wrapping version 3, for the lengthmaster.

squirt_inducer_man · Aug 9, 2023

simmrast said:
Thank you for your tips! I will try with 2 therebands instead of only one and also clamp down a bit further down the shaft.
I’m just afraid clamping down to far down will not give me a good overall stretch.

If you clamp down at the extreme base (inner base of the shaft), you will be able to dig deep into your inner penis and the Fundiform ligament and Suspensory ligament, and stretch these good.

View media item 1359
These kind of stretches are called Expressive Stretches. You should start your stretching journey with LENGTHMASTER 3 by clamping down behind the glans. It will be an uncomfortable feeling in the beginning when you stretch. I hope you stretch like this:

View media item 1351
That is: You should angle the LENGTHMASTER 3/chamber when you stretch. This way you can stretch harder, and you keep the pressure off your glans.

orgasmic19 · Aug 9, 2023

simmrast said:
Thank you for your tips! I will try with 2 therebands instead of only one and also clamp down a bit further down the shaft.
I’m just afraid clamping down to far down will not give me a good overall stretch.

Don’t be afraid to clamp down all the way at least have some distance between the two clamps.

I clamp almost all the way down and never had a problem with stretching. Make sure you are warming up minimize discomfort.

squirt_inducer_man · Aug 9, 2023

orgasmic19 said:
Don’t be afraid to clamp down all the way at least have some distance between the two clamps.

I clamp almost all the way down and never had a problem with stretching. Make sure you are warming up minimize discomfort.

I clamp down all the way. The bottom and upper chamber are touching each other. But I couldn't do this is the beginning.

This fixed my problem with the pinching I experienced.

squirt_inducer_man said:
Look in these threads:
🔗 Slippage solutions.

simmrast · Aug 10, 2023

squirt_inducer_man said:
You will make it work. If you need guidance just ask me. I have a lot of tips and tricks related to the LENGTHMASTER 3. I have the dimensions of both the Thera-Band® and the bandage in my video instructions. Try to follow these.

Also if your flaccid is not that long (me in the beginning = I struggle a lot = reason to create these video instructions), you can use a bandage to tie away your scrotum during the wrapping. You can also wind the first Thera-Band® without pulling back your foreskin. After you have winded the second Thera-Band® on your penis, you can then pull back the foreskin with one of your hand and then wind the bandage on. Then comes the PENIS WRAPPING TAPE. This is to keep your foreskin retracted during the clampdown, and keep the forskin outside of the wrap.

The first piece of Thera-Band® you should have on a paper roll so it's easier to wind it on your penis. You don't want creases or wrinkles for the first layer of Thera-Band®. The second is not as important. The second Thera-Band® is only to cover the inner base of your penis.

When you attach in the chamber you should hold on your glans so you push as much blood from it as possible. You don't want to attach in the chamber, semi-erected.

I hope this helps. Just ask if you need more guidance.

Thank you so much for taking the time to help me, it’s really appriciated!!!!
I’ve taken all your suggestions and applied them this morning. I managed to do somewhat of a stretch this morning but it failed on me quickly. Keeping the LM at an angle helped. But after 3 minutes of a stretch my head was deformed and I just felt pain.
It just doesn’t make sence why this is happening, I have doing hanging sessions with 3,5 kg with another device that really grabs on to my tissue.

I attatched a video so you can see how it looks. It just grabs the skin and not the tissue.

squirt_inducer_man · Aug 10, 2023

simmrast said:
Thank you so much for taking the time to help me, it’s really appriciated!!!!
I’ve taken all your suggestions and applied them this morning. I managed to do somewhat of a stretch this morning but it failed on me quickly. Keeping the LM at an angle helped. But after 3 minutes of a stretch my head was deformed and I just felt pain.
It just doesn’t make sence why this is happening, I have doing hanging sessions with 3,5 kg with another device that really grabs on to my tissue.

I attatched a video so you can see how it looks. It just grabs the skin and not the tissue.

I have looked at the video. It looks like you haven't got the clamp down point perfect, and that your foreskin is not fully retracted.

Try to clamp down lower on your penis shaft. When I do stretches with the clamp point behind the glans, I need to clamp down lower then I think I will need to get it behind the glans with a secure clamp down.

simmrast · Aug 10, 2023

squirt_inducer_man said:
I have looked at the video. It looks like you haven't got the clamp down point perfect, and that your foreskin is not fully retracted.

Try to clamp down lower on your penis shaft. When I do stretches with the clamp point behind the glans, I need to clamp down lower then I think I will need to get it behind the glans.

Thank you for your feedback.
I’m circumcised I don’t have a foreskin. But I had it done when I was an adult so the skin is a bit more loose than someone who got circumcised at birth. That’s part of the problem if I guess - loose skin.

questions: when you’re strapped into the devise and start stretching does the wrapping go over your glans or is your glans still exposed?
And how tight should the wrapping be?

I will try to clamp lower down and see what happens.

squirt_inducer_man · Aug 10, 2023

simmrast said:
Thank you for your feedback.
I’m circumcised I don’t have a foreskin. But I had it done when I was an adult so the skin is a bit more loose than someone who got circumcised at birth. That’s part of the problem if I guess - loose skin.

questions: when you’re strapped into the devise and start stretching does the wrapping go over your glans or is your glans still exposed?
And how tight should the wrapping be?

I will try to clamp lower down and see what happens.

Okey! I have a lot of foreskin. But I have to admit that it has even out as I have gotten longer.

The wrapping can go go over your glans when you stretch (but not immediately), but you should feel the stretch deep inside the tissue.
That is: You should make sure the pads on the chamber, are not only grabbing the outer skin, but mainly the inner tissue. You accomplish this with a thin wrap, and that you pull the foreskin you have left back.

When you attach in the chamber pull your penis forward by the glans, and try to attach the chamber at the base. Your clamp down point will move forward when you compress your penis by turning the wing nuts.

I have video instructions, for everything I'm mentioning now.

simmrast · Aug 11, 2023

Thank you @squirt_inducer_man for answering my questions and your guidance!
Right wrapping method and clamping down further back is key. But I still feel the pain and the chamber is extremly uncomfortble.
I think I found the problem. The padding on my device is defective, uneven and doesn’t fully cover the plastic. The sharp corners dig into my skin.

So I’m gonna ask for a replacement and I hope this device will work for me.

squirt_inducer_man · Aug 11, 2023

simmrast said:
Thank you @squirt_inducer_man for answering my questions and your guidance!
Right wrapping method and clamping down further back is key. But I still feel the pain and the chamber is extremly uncomfortble.
I think I found the problem. The padding on my device is defective, uneven and doesn’t fully cover the plastic. The sharp corners dig into my skin.

So I’m gonna ask for a replacement and I hope this device will work for me.

Good I could be of some help.

You don't need a replacement.
Look at this post:
🔗 Method to reduce pinching.

There will always be a feeling of pinching. You will get used to the feeling with time. The sharp corners will always dig in. If you get a replacement you will have the same "problem". Look at the post I linked above; With that method (and your wrap) you will get reduced feeling of pinching. You will never be able to remove it fully.

Is the padding loose? If so maybe this happend, due to much side force on the padding, when you where stretching? Probably because you didn't clamped down proper.

If it's loose, you can re-attach it with Gorilla glue.

Kind regards @squirt_inducer_man

squirt_inducer_man · Aug 11, 2023

@simmrast
My padding looks like this on the bottom part of the chamber.

simmrast · Aug 11, 2023

squirt_inducer_man said:
Good I could be of some help.

You don't need a replacement.
Look at this post:
🔗 Method to reduce pinching.

There will always be a feeling of pinching. You will get used to the feeling with time. The sharp corners will always dig in. If you get a replacement you will have the same "problem". Look at the post I linked above; With that method (and your wrap) you will get reduced feeling of pinching. You will never be able to remove it fully.

Is the padding loose? If so maybe this happend, due to much side force on the padding, when you where stretching? Probably because you didn't clamped down proper.

If it's loose, you can re-attach it with Gorilla glue.

Kind regards @squirt_inducer_man

No this is how it came when I got it, but I didn’t think it would matter. The padding sits on nice and good so it hasn’t shifted.
The problem is that the padding is cut to short and uneven to not fully cover the chamber area. Even if I were to remove it and place it on again it wouldn’t cover the entire chamber.
The corners where the strap comes out is very sharp - the padding should cover this area. Also when I look at the pictures of device on the website the chamber is fully covered - that is how the device should look when it reaches the costomer.

Investing time, energy and possibly money to getting the wrapping done right is one thing I get that! Also understanding that there is a learning curve to ALL PE devices, I also fully understand

But if you ask me, for 184 dollars the device should be complete. I shouldn’t have to buy things and modify it to make the chamber comfortble - the corners shouldn’t dig into my penis otherwise the device is faulty.
Am I wrong?
But I have tried putting a thicker THERABAND per your instructions, doesn’t work for me.
And yes a little pinching is expected, as I said I’ve been hanging with a clamping style device for years and feel a bit of a pinch here and there. But it’s not so uncomfortable that I cannot to my complete a session with it or almost scream in pain when stretching begins. I haven’t even been able to complete a full stretching session with the LM yet! Now I got the wrapping under control, the right clamping point (and once again thanks to you for helping me) but the device just gives me intense pain.

Sorry for rambling on but I’m just very annoyed and frustrated. Anyway I’ve contacted support for a replacement.

squirt_inducer_man · Aug 11, 2023

simmrast said:
No this is how it came when I got it, but I didn’t think it would matter. The padding sits on nice and good so it hasn’t shifted.
The problem is that the padding is cut to short and uneven to not fully cover the chamber area. Even if I were to remove it and place it on again it wouldn’t cover the entire chamber.
The corners where the strap comes out is very sharp - the padding should cover this area. Also when I look at the pictures of device on the website the chamber is fully covered - that is how the device should look when it reaches the costomer.

Investing time, energy and possibly money to getting the wrapping done right is one thing I get that! Also understanding that there is a learning curve to ALL PE devices, I also fully understand

But if you ask me, for 184 dollars the device should be complete. I shouldn’t have to buy things and modify it to make the chamber comfortble - the corners shouldn’t dig into my penis otherwise the device is faulty.
Am I wrong?
But I have tried putting a thicker Theraband per your instructions, doesn’t work for me.
And yes a little pinching is expected, as I said I’ve been hanging with a clamping style device for years and feel a bit of a pinch here and there. But it’s not so uncomfortable that I cannot to my complete a session with it or almost scream in pain when stretching begins. I haven’t even been able to complete a full stretching session with the LM yet! Now I got the wrapping under control, the right clamping point (and once again thanks to you for helping me) but the device just gives me intense pain.

Sorry for rambling on but I’m just very annoyed and frustrated. Anyway I’ve contacted support for a replacement.

You're welcome.
Everything is okay. I understand your frustration.
Maybe the padding is supposed to cover more area in the chamber...I don't know?

You need to ask customer support at MoS Shop to figure that one out. Please share your findings.
- Have I been stretching with a more uncomfortable feeling than I needed to? 🤔

Note from Super Moderator:
This thread is in the wasteland between, Penis Enlargement Forum and Customer Care and Support Forum it will stay in, Penis Enlargement Forum.

squirt_inducer_man · Aug 11, 2023

squirt_inducer_man said:
You're welcome.
Everything is okay. I understand your frustration.
Maybe the padding is supposed to cover more area in the chamber...I don't know?

You need to ask customer support at MoS Shop to figure that one out. Please share your findings.
- Have I been stretching with a more uncomfortable feeling than I needed to? 🤔

Note from Super Moderator:
This thread is in the wasteland between, Penis Enlargement Forum and Customer Care and Support Forum it will stay in, Penis Enlargement Forum.

Now when I am attached to the chamber it's not uncomfortable for me. It's just how it's supposed to be.

Just can’t get the LM to work

Member

(SIM)

0

Member

Member

(SIM)

(SIM)

(SIM)

0

(SIM)

Member

Attachments

(SIM)

Member

(SIM)

Member

Attachments

(SIM)

(SIM)

Member

(SIM)

(SIM)

Similar threads