Bathmate, or what pump?

J

jasonwelcher

Member
Registered
Joined
Jan 15, 2020
Messages
16
Hello. Im new to penis enlargement, and was thinking of buying a bathemate hydromax7. I have a few questions about this. My current penis length is around 6 1/4" inches erect length with out pressing the ruler in against my pelvic bone. and girth is about 4.5" I would like to just get to around 7.5 inches in length, and 5-5.25" in girth. Will this pump do what Im looking for? Id like as much info as I can get from anyone so please help me out. Thanks a lot
 
jasonwelcher said:
Hello. Im new to penis enlargement, and was thinking of buying a bathemate hydromax7. I have a few questions about this. My current penis length is around 6 1/4" inches erect length with out pressing the ruler in against my pelvic bone. and girth is about 4.5" I would like to just get to around 7.5 inches in length, and 5-5.25" in girth. Will this pump do what Im looking for? Id like as much info as I can get from anyone so please help me out. Thanks a lot
Click to expand...

Yes that would be the perfect model to buy as it will get you to where you want to be from where you are now. As far as a workout is concerned I can set you up with an awesome SRT program that will get you where you want to go very quickly. Let me know when you order the pump and we can start working on the routine.
 
I ordered one. I dont know how to private message. I received an email directly from hydromax, and shipping info from dhl. I didnt know if that was accurate or not. Will everything be discreetly delivered? Sorry for dumb questions.
 
Yes everything is very discreet. Your order will come triple boxed with no identifying remarks on the box. You have no idea what it is until you open the last box. You can get immediate service on any of these questions question in email to sales@mattersofsize.com
 
Ok I have a few more questions....First off I received the pump. When I ordered it. There were suppose to be free extras with the pump. I never received them. It was a ring, and a sleeve of some sort. Second I tried the pump out for the first time. I followed the directions and had the black tab in the middle section, and filled with water. It would push water out, but wouldnt hold suction. I messed with it for awhile, and finally tried using it under water, and it started working after that. I got a good seal, and could feel the suction. I followed the instructions and would do 5x5x5....The first 5 minutes it barely did anything to my penis. The second 5 minutes it took it up to 5 inches, and the third 5 minutes it took it to 5.5 inches. I never even reached full erection size. I kept pulling the pump in as hard as I could, and just didnt feel a ton of pump power...am I doing something wrong? Is this normal? Should it not go full erect size while pumping? I'm not unhappy yet, but it isnt what I was expecting yet. Any tips, tricks, and explanations of what I may be doing wrong would be great. Also will the extras that was suppose to come with the pump come separate?
 
What state are you entering the cylinder? Are you semi/erect or flaccid, I try to get at least 70% erect before entering, I've personally gone for the wine Vac mod on my bathmate which was a game hanger and couldn't go back, I also removed the comfort pad. Also make sure your shaven keeps better suction
 
I was going in completely flaccid. I dont know much about any of this stuff. This is my first venture at all into any of this. I am not sure what the wine vac mod is.
 
For starters I'd recommend going in at least 60-70% erect personally.

As for the winevac mod this increases pressure and enables you to push more when replacing the top with a rubber wine Vac . However id look at this further down the line when your accustomed to general use of the bathmate.
 
jasonwelcher said:
Ok I have a few more questions....First off I received the pump. When I ordered it. There were suppose to be free extras with the pump. I never received them. It was a ring, and a sleeve of some sort. Second I tried the pump out for the first time. I followed the directions and had the black tab in the middle section, and filled with water. It would push water out, but wouldnt hold suction. I messed with it for awhile, and finally tried using it under water, and it started working after that. I got a good seal, and could feel the suction. I followed the instructions and would do 5x5x5....The first 5 minutes it barely did anything to my penis. The second 5 minutes it took it up to 5 inches, and the third 5 minutes it took it to 5.5 inches. I never even reached full erection size. I kept pulling the pump in as hard as I could, and just didnt feel a ton of pump power...am I doing something wrong? Is this normal? Should it not go full erect size while pumping? I'm not unhappy yet, but it isnt what I was expecting yet. Any tips, tricks, and explanations of what I may be doing wrong would be great. Also will the extras that was suppose to come with the pump come separate?
Click to expand...


first off trim your pubic hair if you have not done that, before filling with water switch the black pip to either left side or right side which is the closed position.. once you enter the bathmate and are ready to pump switch the black pip to the middle which is now in the opened position

now push the pump water will come out from the top you should get a nice pulling feeling, whatever you do make sure to go nice and easy, as you are still getting used to it. i would also remove the comfort pad as i never used it try and see what feels better to you
 
Last edited:
jasonwelcher said:
Ok I have a few more questions....First off I received the pump. When I ordered it. There were suppose to be free extras with the pump. I never received them. It was a ring, and a sleeve of some sort. Second I tried the pump out for the first time. I followed the directions and had the black tab in the middle section, and filled with water. It would push water out, but wouldnt hold suction. I messed with it for awhile, and finally tried using it under water, and it started working after that. I got a good seal, and could feel the suction. I followed the instructions and would do 5x5x5....The first 5 minutes it barely did anything to my penis. The second 5 minutes it took it up to 5 inches, and the third 5 minutes it took it to 5.5 inches. I never even reached full erection size. I kept pulling the pump in as hard as I could, and just didnt feel a ton of pump power...am I doing something wrong? Is this normal? Should it not go full erect size while pumping? I'm not unhappy yet, but it isnt what I was expecting yet. Any tips, tricks, and explanations of what I may be doing wrong would be great. Also will the extras that was suppose to come with the pump come separate?
Click to expand...

You should’ve gotten those extras perhaps they were shipped out separately so do me a favor and send an email to sales@mattersofsize.com and Lightning will get you all straightened out.
 
Ok first off I emailed lightning. Second off I used the pump again this morning. I shaved more last night to be ready for this morning. I tried to get 6-70% erect as stated. I tried it without the comfort pad, and my testicles kept almost getting sucked in. I had to pull and hold them down, and it was making it not seal real well. So I finally got it to seal, and it didnt feel like it got any more suction than it did with the comfort pad. So I put it back on after the initial 5 minutes, Going in at 60-70% erect It showed 6 inches on the scale, but Im not sure I had the pump fully pressed to my pelvis. When I removed the pump after it was showing 6 inches I still wasnt fully erect. Should this take me to a full erection over 5 minutes? Or am I not doing something right? Will it still grow if I am not getting a full sized erection while pumping? Is there any tips or tricks to maximize the use of this, and make gains quicker? Thanks for all the help!
 
I'd look to see if your bathmate can be modified for the winevac mod, until I used this mod I couldn't get great pressure either. Must say every so often I have to give it a bit more pump to keep pressure up
 
jasonwelcher said:
Ok first off I emailed lightning. Second off I used the pump again this morning. I shaved more last night to be ready for this morning. I tried to get 6-70% erect as stated. I tried it without the comfort pad, and my testicles kept almost getting sucked in. I had to pull and hold them down, and it was making it not seal real well. So I finally got it to seal, and it didnt feel like it got any more suction than it did with the comfort pad. So I put it back on after the initial 5 minutes, Going in at 60-70% erect It showed 6 inches on the scale, but Im not sure I had the pump fully pressed to my pelvis. When I removed the pump after it was showing 6 inches I still wasnt fully erect. Should this take me to a full erection over 5 minutes? Or am I not doing something right? Will it still grow if I am not getting a full sized erection while pumping? Is there any tips or tricks to maximize the use of this, and make gains quicker? Thanks for all the help!
Click to expand...

What you’re saying sounds just as it should so I wouldn’t worry much on your results at this point. What I was suggest that’s gonna bring you so much more growth so much quicker is the SRT 5×5×3. Check it out in the SRT thread and give it a try tonight and let me know what you think. I guarantee you see much more expansion.
 
I'm not seeing satisfactory results with the bathmate. I fill it with water, and the end has to be submerged when I "pump" If I try to pump it out of being submerged the water shoots out the end, but it doesnt hold pressure. Air gets sucked back in the end. So It makes it kind of a pain. I have to be in a bath, or have a big pot of water to get it to hold. It seems to not get much pressure either. Ive tried it every which way. without the comfort pad, with, and recently received the extras, and the mitysleev helps out some. It still just doesnt feel like it is getting much pressure. It never pumps me to even full erection, and its tough to get erect before going in, because its kinda cumbersome to get all lined up and all tucked in to start pumping. Does anyone else have these issues...if so what did you do to solve the problems? Thanks for any help
 
jasonwelcher said:
I'm not seeing satisfactory results with the bathmate. I fill it with water, and the end has to be submerged when I "pump" If I try to pump it out of being submerged the water shoots out the end, but it doesnt hold pressure. Air gets sucked back in the end. So It makes it kind of a pain. I have to be in a bath, or have a big pot of water to get it to hold. It seems to not get much pressure either. Ive tried it every which way. without the comfort pad, with, and recently received the extras, and the mitysleev helps out some. It still just doesnt feel like it is getting much pressure. It never pumps me to even full erection, and its tough to get erect before going in, because its kinda cumbersome to get all lined up and all tucked in to start pumping. Does anyone else have these issues...if so what did you do to solve the problems? Thanks for any help
Click to expand...

Take off and clean the cap! And when in use, make sure the cap‘s valve is in the center position, not pushed to the side.

Worse case scenario contact Bathmate for a valve replacement if under warranty, or they do have replacement valves for purchase.
 
Tried the winevac mod? This helped my pressure however increases it no end so be careful
 
  • Like
Reactions: DLD
jasonwelcher said:
I'm not seeing satisfactory results with the bathmate. I fill it with water, and the end has to be submerged when I "pump" If I try to pump it out of being submerged the water shoots out the end, but it doesnt hold pressure. Air gets sucked back in the end. So It makes it kind of a pain. I have to be in a bath, or have a big pot of water to get it to hold. It seems to not get much pressure either. Ive tried it every which way. without the comfort pad, with, and recently received the extras, and the mitysleev helps out some. It still just doesnt feel like it is getting much pressure. It never pumps me to even full erection, and its tough to get erect before going in, because its kinda cumbersome to get all lined up and all tucked in to start pumping. Does anyone else have these issues...if so what did you do to solve the problems? Thanks for any help
Click to expand...
Ur losing pressure. I have a Xtreme bm and the pressure is much as u want it. Be sure ur not leaking water. If it's full of water it will leak if u have leaks, then u won't be able to get pressure. The valve has a button if I remember that u can close and open, be sure it's fully close. It has a button and a valve that u can open, close, be sure both are closed. When u stop pumping the bm should not leak at all, causing much pressure as u want. If it leaks ull prob have to contact BM
 
Get yourself a wine vacuum and make the modification and you’ll have a pump with unlimited intensity. It’s the cheapest way to make your Bathmate hardcore.
 
You must log in or register to reply here.

Similar threads

H
penis pumping with heat
Replies
16
Views
712
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
T
Can't make mityvac hidro pump work
Replies
7
Views
312
DLD
DLD
DLD
T
What size Bathmate should I get?
Replies
8
Views
120
DLD
DLD
DLD
A
What can i expect with this newbie routine
2
Replies
30
Views
815
T
TWIST&PULL
T
H
Mytivac vs Bathmate
Replies
0
Views
361
H
hoppyj01
H
Back
Top Bottom