used the cap of a 64 oz laundry detergent bottle. The diameter is about 7 inches on the outer edge of the cap. I drilled a hole in the top slightly smaller than the rubber part of the wine vacuum device and inserted it so it is very snug. This fits perfect over the top of the Bathmate X-40. It pulls out some water which increases the pressure a little. The relief valve of the Bathmate automatically prevents extreme pressure.
A regular pvc tube that's flexible. You pull the first end over the pump/tube, and you need to heat it in order to accomplish this. Then on the other end you stick the cork that you get with the VACU VIN pump.Do we want to use 3/4 pvc with a cap? Then cut a hole in the cap to slot the cork? That’s what I gathered from the video
Yes you can relieve the pressure by pushing on the topside of the cork. This is my understanding.So you’re saying the control of adding and relieving pressure will be with the wine vac?
Awesome. I have a feeling that this mod is superior to buying the HydroXtreme version of the pump. I have HydroXtreme pumps as well, but their hand pump could be better.Ok I just ordered the vac. I’ll pick up some tubing when it arrives and rest this out. I love my gains from the hydro max so far. Super excited to speed the gains with more intensity
Awesome!View attachment 1832805
This is what I have come up with.
You can permanently fixate (always leave it on) the pvc tube and the cork.You can relieve the pressure on the topside of the cork.
Okey thanks for sharing. That was way easier, awesome. 👌here is an extremely easy way i have been using this for many years just attach a piece of a thicker sleeve to the end of the vacu vin i have tape holding it because it's a bit short and comes off without the tape
View attachment 1832814
View attachment 1832815View attachment 1832816