Progress thread SIM's penis enlargement journey

[squirt_inducer_man]

Love your enthusiasm! Keep at it!

I will have to say I probably will not be super active on the forum during the month of April due to a new job opportunity I need to focus on. However, I will check in from time to time. My motivation will be that this new job will enable me to work from home so this could help me to be even more dialed in with PE training !!

Thanks! Doing everything to keep the fun going.

Awesome to get that opportunity to work from home.

I'm probably need to do the same, are studying through work, and I need to focus in on that more. Some projects that needs to be finalized soon.

 

[DLD]

So smart to keep it handwriting instead of computer. We depend way too much on the computer

 

[squirt_inducer_man]

So smart to keep it handwriting instead of computer. We depend way too much on the computer

Yes indeed! I did the same with my weight lifting. My theory is.
If you write down what you are going to do, before you are doing it, this will enforce the dicipline in you. You can't write down something you do not do.

And then later when you are done you get to (check) that box. You feel accomplished. You may or may not have gained anything then, but you trust that the process of checking those boxes over and over again, will get you there.

This will not work if I do this on a phone or PC, it doesn't feel real to me then.

 

[MosMaster]

Thanks! Doing everything to keep the fun going.

Awesome to get that opportunity to work from home.

I'm probably need to do the same, are studying through work, and I need to focus in on that more. Some projects that needs to be finalized soon.

Working from home would probably be ideal for every PE practitioner!

 

[MosMaster]

Just make sure you don't fall off from your routine.

SIR YES SIR will stay consistent!

 

[squirt_inducer_man]

Working from home would probably be ideal for every PE practitioner!

That's why it was perfect I found MOS during this time in my life.

 

[MosMaster]

That's why it was perfect I found MOS during this time in my life.

Yup, imagine all the hours on end you can get in with the ADS! Then mini-stretches through out the day between that!

Anyways, time for girth session before bed, cya later!! Sleep tight.

 

[squirt_inducer_man]

Yup, imagine all the hours on end you can get in with the ADS! Then mini-stretches through out the day between that!

Anyways, time for girth session before bed, cya later!! Sleep tight.

Take care.

 

[DLD]

SIR YES SIR will stay consistent!

Key

 

[squirt_inducer_man]

Then mini-stretches through out the day between that!

Pocket stretches

 

[Big Schwanz Acht]

I've come to the conclusion that no one should pump pass 7hg on any penis pump or else you are looking for injury.

This falls under the catagory of: each person reacts differently

Just a quick synopsis of my journey...
Discovered MOS 10+ years ago and began a Bathmate/LengthMaster routine, starting stats (if I can recall correctly) were 6 3/8" in BPEL and 5 1/2" MSEG. Newby gains reached a plateau of almost 7" BPEL and 6 1/2" MSEG (girth was much easier for me to gain) and I stagnated there until I discovered the VacuVin mod for my Bathmate and I was able to attain pressures within the tube that I never thought possible. Since the BM does not have a pressure gauge, there's no way I could calculate the Hg's but it was easily 3 times what I could impart by hand.

This mod jump-started my gains and over the next few years I was able to reach 8" BPEL and almost 7" MSEG and I was also 'whole-package' pumping (not for everyone, lol)...but again hit a plateau.

Since I was satisfied w/girth (actually it was a tad too much for symmetry), I purchased the MityVac w/the 2 1/2" cylinder...the thought was to limit any width expansion and impart as much force along the length axis. My current routine consists of about one hour in the cylinder at 90% to 100% max pressure (varying the amount every 15 minutes or so) and the Hg's are around 15. It took me a while to work-up to that amount of pressure, but it allowed me to break-through that dreaded plateau stage.

Current stats: 8 1/4" BPEL 6 3/4" MSEG (for a balanced look, I'd like to get to 8 3/4" in length, but PE is effing hard!)

I wrote this just to say everyone is different and finding your limits are very personal, (trust me, I've had blood in my Bathmate tube more times than I care to admit and the donut-effect is a real bitch to combat, but in the end I find it worth the effort)

 

[squirt_inducer_man]

This falls under the catagory of: each person reacts differently

Just a quick synopsis of my journey...
Discovered MOS 10+ years ago and began a Bathmate/LengthMaster routine, starting stats (if I can recall correctly) were 6 3/8" in BPEL and 5 1/2" MSEG. Newby gains reached a plateau of almost 7" BPEL and 6 1/2" MSEG (girth was much easier for me to gain) and I stagnated there until I discovered the VacuVin mod for my Bathmate and I was able to attain pressures within the tube that I never thought possible. Since the BM does not have a pressure gauge, there's no way I could calculate the Hg's but it was easily 3 times what I could impart by hand.

This mod jump-started my gains and over the next few years I was able to reach 8" BPEL and almost 7" MSEG and I was also 'whole-package' pumping (not for everyone, LOL)...but again hit a plateau.

Since I was satisfied w/girth (actually it was a tad too much for symmetry), I purchased the MityVac w/the 2 1/2" cylinder...the thought was to limit any width expansion and impart as much force along the length axis. My current routine consists of about one hour in the cylinder at 90% to 100% max pressure (varying the amount every 15 minutes or so) and the Hg's are around 15. It took me a while to work-up to that amount of pressure, but it allowed me to break-through that dreaded plateau stage.

Current stats: 8 1/4" BPEL 6 3/4" MSEG (for a balanced look, I'd like to get to 8 3/4" in length, but PE is effing hard!)

I wrote this just to say everyone is different and finding your limits are very personal, (trust me, I've had blood in my Bathmate tube more times than I care to admit and the donut-effect is a real bitch to combat, but in the end I find it worth the effort)

How did you deal with the "gator" in the Bathmate? I used my HydroXtreme 7 Wide Boy yesterday and it bruised me big time at the root of my penis. Using a Bandage to compensate sometime but it's not perfect.

The VacuVin mod is that just that you use a Wine pump to increase the pressure in the pump? Or how do you implement this mod?

 

[Big Schwanz Acht]

How did you deal with the "gator" in the Bathmate? I used my HydroXtreme 7 Wide Boy yesterday and it bruised me big time at the root of my penis. Using a Bandage to compensate sometime but it's not perfect.

The VacuVin mod is that just that you use a Wine pump to increase the pressure in the pump? Or how do you implement this mod?

Bathmate gator-bite is zero-fun, but when I used the wine-pump I no longer had that issue. Go on Amazon and order the VacuVin (should still be around $10usd) and buy a short stretch (2-3 inches) of PVC tubing (I believe 7/8" inside diameter but bring your VV to make sure it fits the end of it). Then stretch one end of the tubing over the BM tip (I keep mine permanently attached) and once you have the BM surcured to your body, use the VV and slowly draw the air/water from the cylinder (this can be a tad 'fiddly'). Once you get the hang of it, it'll be easy...just be careful cuz the amount of pressure you'll be able to impart will blow your mind.

As a side-note, I do all my BM work 'whole-package' and that may take some getting-used-to. I currently only use my BM (X40 model...that's how old it is) maybe once each week, (I use the Goliath even less) since I get too much fluid retention. The MityVac 2 1/2" cylinder keeps the FR to a minimum for me

 

[squirt_inducer_man]

Bathmate gator-bite is zero-fun, but when I used the wine-pump I no longer had that issue. Go on Amazon and order the VacuVin (should still be around $10usd) and buy a short stretch (2-3 inches) of PVC tubing (I believe 7/8" inside diameter but bring your VV to make sure it fits the end of it). Then stretch one end of the tubing over the BM tip (I keep mine permanently attached) and once you have the BM surcured to your body, use the VV and slowly draw the air/water from the cylinder (this can be a tad 'fiddly'). Once you get the hang of it, it'll be easy...just be careful cuz the amount of pressure you'll be able to impart will blow your mind.

As a side-note, I do all my BM work 'whole-package' and that may take some getting-used-to. I currently only use my BM (X40 model...that's how old it is) maybe once each week, (I use the Goliath even less) since I get too much fluid retention. The MityVac 2 1/2" cylinder keeps the FR to a minimum for me

Thanks for the information really appreciate it.
The gator is a mean crearure, I pretty much hate her at this point.

I am considering to send Bathmate a report about this, and lay forth for them improvements they need to do in order to keep their customers, and make their pumps even better. The comfort inserts they got are pretty much worthless if your goal is to maximize pressure and expansion, and make your penis bigger.
The Bathmate pumps with an external pump (HydroXtreme versions), they do not need all those rubber creases I think. These are the only problem with the Bathmate pumps.
Are considering to switch to MityVac for this reason alone (the gator).

I have the hydromax 5 as well, my short goal is to max this pump completely out (girth and length), that would be satisfying. This mod may be the way to do that, since I have maxed out the pressure a long time ago. I will be careful as you suggested. Thanks for the description of this mod.

In the HydroXtreme 7 Wide Boy I use a bandage winded att be root of the penis to reduce the mushroom shape that tend to happen, and also the gator do not get me as bad. But ths at the same time reduce the expansion at the entire penis in girth.

If you pump with your whole package, what does this do to your testicles, is it safe?

 

[huge-girth]

This falls under the catagory of: each person reacts differently

Just a quick synopsis of my journey...
Discovered MOS 10+ years ago and began a Bathmate/LengthMaster routine, starting stats (if I can recall correctly) were 6 3/8" in BPEL and 5 1/2" MSEG. Newby gains reached a plateau of almost 7" BPEL and 6 1/2" MSEG (girth was much easier for me to gain) and I stagnated there until I discovered the VacuVin mod for my Bathmate and I was able to attain pressures within the tube that I never thought possible. Since the BM does not have a pressure gauge, there's no way I could calculate the Hg's but it was easily 3 times what I could impart by hand.

This mod jump-started my gains and over the next few years I was able to reach 8" BPEL and almost 7" MSEG and I was also 'whole-package' pumping (not for everyone, LOL)...but again hit a plateau.

Since I was satisfied w/girth (actually it was a tad too much for symmetry), I purchased the MityVac w/the 2 1/2" cylinder...the thought was to limit any width expansion and impart as much force along the length axis. My current routine consists of about one hour in the cylinder at 90% to 100% max pressure (varying the amount every 15 minutes or so) and the Hg's are around 15. It took me a while to work-up to that amount of pressure, but it allowed me to break-through that dreaded plateau stage.

Current stats: 8 1/4" BPEL 6 3/4" MSEG (for a balanced look, I'd like to get to 8 3/4" in length, but PE is effing hard!)

I wrote this just to say everyone is different and finding your limits are very personal, (trust me, I've had blood in my Bathmate tube more times than I care to admit and the donut-effect is a real bitch to combat, but in the end I find it worth the effort)

I'm yet to complete 3 months of using the mityvac. When I made that post about not exceeding 7hg, I was having pains each time I pump passed it. Now I start my first pumping set at 8hg and end the last pumping set at 9hg. I noticed that most pressure is needed as one progresses further.

I thought you have gotten to 7 inches mid shaft permanent girth. Or could it be that you stopped chasing girth and focused fully on length?

 

[Big Schwanz Acht]

I thought you have gotten to 7 inches mid shaft permanent girth. Or could it be that you stopped chasing girth and focused fully on length?

I have focused on length for the last few years and probably lost 1/4" in girth...limiting my Bathmate sessions has probably contributed to this as the fluid retention seemed to take several weeks (months?) to fully dissipate.

That elusive (and extremely difficult) 9" BPEL is still the goal, but that last 3/4" seems almost impossible

 

[Big Schwanz Acht]

If you pump with your whole package, what does this do to your testicles, is it safe?

'balls 'n' all' just get crammed in there, (my logic at the time was to reduce the available space for girth expansion thus imparting more length pressure...not sure if that actually worked or not) and after the initial 'shock' when they get sucked-in, the sensation was not uncomfortable at all. I did notice some fluid retention in my scrotom, but that went away (far quicker than the donut). All functionality remained and I have seen/felt no ill effects.

p.s. I didn't mean to high-jack your thread...just wanted to give Huge Girth a different viewpoint regarding hi Hg pumping

 

[squirt_inducer_man]

p.s. I didn't mean to high-jack your thread...just wanted to give Huge Girth a different viewpoint regarding hi Hg pumping

Okey good to know your balls are okey.
It feels like the balls will be pushed hard agains the inner walls of the tube. Can't be comfortable, but who said PE would be comfortable.

You can high-jack my thread it's fine with me. We are here to grow and learn, and I'm just a "newbie", I need all the information I can get. Especially from as an experience brother as yourself. It's no problem to discuss pumping here, that's my next stage in my program after I'm at BPEL: ~7,5", so it's good I get that information now, so I'm prepared when I'm going all in with my pumping routine.

You can keep your discussion with @hugh-girth everyone will learn from that.

 

[huge-girth]

I have focused on length for the last few years and probably lost 1/4" in girth...limiting my Bathmate sessions has probably contributed to this as the fluid retention seemed to take several weeks (months?) to fully dissipate.

That elusive (and extremely difficult) 9" BPEL is still the goal, but that last 3/4" seems almost impossible

If I recall correctly, you are pumping only and not doing any manual girth exercises. Do you think that could be the reason why you lost the 1/4 in girth?

 

[Big Schwanz Acht]

If I recall correctly, you are pumping only and not doing any manual girth exercises. Do you think that could be the reason why you lost the 1/4 in girth?

That's the logical conclusion I came-up with...once I've hit my length goal I can easily replicate my girth exercises (just have a higher hot water bill from all the time in the shower )