Sharing pumping pics

[Exterminate2045]

Slowly filling up the tube (diameter of 4.5cm so converting, it would be 5.5 in circumference)

Excited for soon to come gains

 

[DLD]

You are seriously packing that tube. You might want to go for something a little bit wider. That's too much dick for that tube

 

[Exterminate2045]

You are seriously packing that tube. You might want to go for something a little bit wider. That's too much dick for that tube

Lol yep definitely. But just happy with the gains. Back then it didnt even filled the tube but hear this: WITH YOUR 5X5X3 routine, it did wonders. That i thank you

 

[DLD]

Lol yep definitely. But just happy with the gains. Back then it didnt even filled the tube but hear this: WITH YOUR 5X5X3 routine, it did wonders. That i thank you

So happy you have seen the potential of pe

 

[Abdiel Bull Berg]

I might join this picture thread as well, when I finally go get my MityVac tomorrow.

Just hoping I ordered a wide enough tube and don’t end up instantly filling it up like you do with yours. Need some room for expansion.

May I ask what’s the diameter of the tube you’re using is?

 

[DLD]

You choose the proper tube size when you order period did you measure and pick the right tube?

 

[Exterminate2045]

I might join this picture thread as well, when I finally go get my MityVac tomorrow.

Just hoping I ordered a wide enough tube and don’t end up instantly filling it up like you do with yours. Need some room for expansion.

May I ask what’s the diameter of the tube you’re using is?

diameter of 4.5cm so converting, it would be 5.5 in circumference

 

[Abdiel Bull Berg]

So tested out my newly arrived 2 inchx9 inch tube.
Damn near filling it up already in girth and soon in length.

 

[DLD]

So tested out my newly arrived 2 inchx9 inch tube.
Damn near filling it up already in girth and soon in length.

Get yourself a new tube, they're on sale right now. Using the code MOS18 And you can get 18 Percent off

 

[Exterminate2045]

So tested out my newly arrived 2 inchx9 inch tube.
Damn near filling it up already in girth and soon in length.

thats dick goals for me. hopefully i get to that size

 

[orgasmic19]

So tested out my newly arrived 2 inchx9 inch tube.
Damn near filling it up already in girth and soon in length.

What are your stats in the tube versus out the tube? Do you notice more length?

 

[Exterminate2045]

So tested out my newly arrived 2 inchx9 inch tube.
Damn near filling it up already in girth and soon in length.

thats dick goals for me. hopefully i get to that size

 

[Abdiel Bull Berg]

What are your stats in the tube versus out the tube? Do you notice more length?

When I did my morning routine today I got up to 8 inches, so about half an inch more length in the tube.

Though will try to pump to over the 8 inch mark on my evening routine.

 

[Abdiel Bull Berg]

thats dick goals for me. hopefully i get to that size

With the proper work and consistency you’ll get there, just give it some time.

 

[DLD]

thats dick goals for me. hopefully i get to that size

You will my brother just stick to the plan.

 

[BullBarrel]

When I did my morning routine today I got up to 8 inches, so about half an inch more length in the tube.

Though will try to pump to over the 8 inch mark on my evening routine.

Is this the only pump you have had? I have a bath mate and just wonder if there is enough difference I need both. The bath mate is large enough at the bottom it’s hard to keep the nutz out…..

 

[DLD]

Is this the only pump you have had? I have a bath mate and just wonder if there is enough difference I need both. The bath mate is large enough at the bottom it’s hard to keep the nutz out…..

Go for the Mityvac. You will never need Another pump again. Because if you out max out a tube you simply order a new tube. There is not a better pump than the mityvac

 

[Abdiel Bull Berg]

Is this the only pump you have had? I have a bath mate and just wonder if there is enough difference I need both. The bath mate is large enough at the bottom it’s hard to keep the nutz out…..

I have a Bathmate Hydroextreme 9 that I’ve used for years on and off and gotten some gains from it though the MityVac is far superior to the Bathmate since it has a gauge and you can buy different sized chambers for it. And of course the quality is much more professional compared to the plastic Bathmate.

I now both look at think of the Bathmate as more of a toy, if you can afford it I highly reccommend you buying the MityVac.
And yes had the problems of my nuts getting sucked into the Bathmate a few times since it’s a bit too wide at the bottom though with my more fitting MityVac chamber that’s not even close to happening.

I’ll probably never go back to using the Bathmate as I find the MityVac that much better and easier to use. Only takes a minute to clean up the lube afterwards and you can of course use it in the shower/bath which is a big bonus.
Though I’ve found out I prefer pumping dry, with lube as I didn’t even get any mentionable fluid retention, and I go hard in the MityVac.

Do yourself a favor and buy a professional pump like the MityVac is, with a fitting chamber and a gauge. I’m not trying to sell it to you this is just my honest asessement, opinion and experience with the MityVac speaking here.

 

[Abdiel Bull Berg]

Go for the Mityvac. You will never need Another pump again. Because if you out max out a tube you simply order a new tube. There is not a better pump than the mityvac

Totally agree with you, and just checked out the price for a new tube, very affordable in my eyes and with the discount it won’t be long before I order me a second, larger tube.

Can’t say enough good things about the MityVac, my only regret is not getting it sooner.

 

[BullBarrel]

I have a Bathmate Hydroextreme 9 that I’ve used for years on and off and gotten some gains from it though the MityVac is far superior to the Bathmate since it has a gauge and you can buy different sized chambers for it. And of course the quality is much more professional compared to the plastic Bathmate.

I now both look at think of the Bathmate as more of a toy, if you can afford it I highly reccommend you buying the MityVac.
And yes had the problems of my nuts getting sucked into the Bathmate a few times since it’s a bit too wide at the bottom though with my more fitting MityVac chamber that’s not even close to happening.

I’ll probably never go back to using the Bathmate as I find the MityVac that much better and easier to use. Only takes a minute to clean up the lube afterwards and you can of course use it in the shower/bath which is a big bonus.
Though I’ve found out I prefer pumping dry, with lube as I didn’t even get any mentionable fluid retention, and I go hard in the MityVac.

Do yourself a favor and buy a professional pump like the MityVac is, with a fitting chamber and a gauge. I’m not trying to sell it to you this is just my honest asessement, opinion and experience with the MityVac speaking here.

Hats why I asked, I wanted your opinion. Thanks for the info.

 

[BullBarrel]

I have a Bathmate Hydroextreme 9 that I’ve used for years on and off and gotten some gains from it though the MityVac is far superior to the Bathmate since it has a gauge and you can buy different sized chambers for it. And of course the quality is much more professional compared to the plastic Bathmate.

I now both look at think of the Bathmate as more of a toy, if you can afford it I highly reccommend you buying the MityVac.
And yes had the problems of my nuts getting sucked into the Bathmate a few times since it’s a bit too wide at the bottom though with my more fitting MityVac chamber that’s not even close to happening.

I’ll probably never go back to using the Bathmate as I find the MityVac that much better and easier to use. Only takes a minute to clean up the lube afterwards and you can of course use it in the shower/bath which is a big bonus.
Though I’ve found out I prefer pumping dry, with lube as I didn’t even get any mentionable fluid retention, and I go hard in the MityVac.

Do yourself a favor and buy a professional pump like the MityVac is, with a fitting chamber and a gauge. I’m not trying to sell it to you this is just my honest asessement, opinion and experience with the MityVac speaking here.

I also have the hydro extreme 9. My last measurements were 7.5 bone pressed and 5.5 girth. What size tubes would you suggest? Thanks

 

[Abdiel Bull Berg]

Hats why I asked, I wanted your opinion. Thanks for the info.

No problem brother, if you ask something and I can answer it I will.

 

[49-er]

I also have the hydro extreme 9. My last measurements were 7.5 bone pressed and 5.5 girth. What size tubes would you suggest? Thanks

Exact same size as me , I use 1.75 for length pumping and 2.00 for girth

 

[Abdiel Bull Berg]

I also have the hydro extreme 9. My last measurements were 7.5 bone pressed and 5.5 girth. What size tubes would you suggest? Thanks

I would suggest you go for the 2 inch diameter one or even a 2.125 diameter one with 9 inch length.
The one I’m using is 2 inch diameter x9 inch length and I’m basically filling it up girth wise and you are 0,4 inch girthier than I am as I have 5,1 inch girth.

I think your safest bet will be 2.125 diameter and at least 9 inch length, especially if you’re looking for both length and girth gains.

I chose the 2 inch tube because I want to mostly target length though it does make me more girthy as well, next tube I’ll buy will be a 2.125x12 inch tube which will target both length and girth.

Anyway, with your stats which are quite close to mine(7.5x5.1) you’ll be packing a 2 inch x 9 inch tube up in no time.

 

[Abdiel Bull Berg]

Exact same size as me , I use 1.75 for length pumping and 2.00 for girth

Damn brother, you are girthier than me as I have 5,1 inch girth and I’m basically packing the 2 inch tube girth wise.
Doesn’t it get a bit too tight with the 1,75 inch tube?

Not trying to critisize you, just wondering, and if that works for you it’s all good.

 

[squirt_inducer_man]

This is a good thread. This information will be helpful next year for me, when my girthwork starts.

 

[49-er]

Damn brother, you are girthier than me as I have 5,1 inch girth and I’m basically packing the 2 inch tube girth wise.
Doesn’t it get a bit too tight with the 1,75 inch tube?

Not trying to critisize you, just wondering, and if that works for you it’s all good.

For 1.75 idea is to pack it for length pumping

 

[BullBarrel]

No problem brother, if you ask something and I can answer it I will.

Do you prefer the mitivac with water or air?

 

[DLD]

Let's see some more pictures

 

[squirt_inducer_man]

View media item 1321View media item 1322View media item 1320
Old picures of me maxing out, Bathmate Hydromax 5 at girth. The gator got me real good as always.

I do miss maxing out these pumps.

 

[BullBarrel]

Finally hit 8 in the bathmate. I ordered the mitivac last night.

 

[squirt_inducer_man]

Finally hit 8 in the bathmate. I ordered the mitivac last night.

Awesomeness.
What Bathmate do you use?
Bathmate HydroXtreme 9?

 

[BullBarrel]

Awesomeness.
What Bathmate do you use?
Bathmate HydroXtreme 9?

Yes, that’s the one

 

[squirt_inducer_man]

Yes, that’s the one

Okey! Are you maxing out the base without the "comfort insert" ?

 

[BullBarrel]

Comfort insert is still in place

 

[DLD]

Thanks you for showing just how big you are!

 

[squirt_inducer_man]

Comfort insert is still in place

Suprising to me. I can't even use the thing.
You will grow thicker if you remove it.

But now you soon have the MityVac

 

[49-er]

Me in my 2.00 cylinder at 12 HG, white sticker start denotes 8"

 

[49-er]

Me in my length pump 1.75" ,hitting 8.25" at 12hg

 

[huge-girth]

Finally hit 8 in the bathmate. I ordered the mitivac last night.

What's your current length measurement?

 

[Abdiel Bull Berg]

Do you prefer the mitivac with water or air?

Haven’t even tried it with water and don’t think I will either as I found dry pumping so much better compared to wet pumping with the Bathmate. Also it takes less time compared to when you have to fill the tube with water.

 

[BullBarrel]

What's your current length measurement?

I measured June 1 and was 7.5 BP trying not to measure for 6 months.

 

[49-er]

I measured June 1 and was 7.5 BP trying not to measure for 6 months.

What you start out at?

 

[BullBarrel]

What you start out at?

Don’t honestly know. I found a web site that provided a jelqing routine. I did that for 3 months and then got a bathmate. Then I found this website and bought a lengthmaster at the beginning of June and measured before I got started with SRT. The Jelqing helped with flacid (I have always been 100% a grower)and I noticed some girth improvements…my wife actually asked why I was “meaty”…..lol
That may have been after I received the bathmate….can’t exactly remember. But to your question I think I have always been between around 6.75 or 7. (Although there was a time when I had gained some weight and my Test levels were in the low 3s that I was around 6 and EQ was poor….that has all improved.

 

[BullBarrel]

Haven’t even tried it with water and don’t think I will either as I found dry pumping so much better compared to wet pumping with the Bathmate. Also it takes less time compared to when you have to fill the tube with water.

I use the bathmate in the hot tub so that part is easy. Depending on how it goes I may mix the two and figure it’s like doing flat bench dumbbell presses and incline dumbbell presses….just hits a little different.

 

[huge-girth]

I measured June 1 and was 7.5 BP trying not to measure for 6 months.

One thing I've noticed is that, the measurement you see inside the pump is never accurate. When I was at 8.25 inches in 2020, I was getting to 7.5 inches inside the Hydromax X9.

 

[squirt_inducer_man]

One thing I've noticed is that, the measurement you see inside the pump is never accurate. When I was at 8.25 inches in 2020, I was getting to 7.5 inches inside the Hydromax X9.

Indeed.

The rulers are just guidelines for keeping safe pressure, since there are no gauge on a Bathmate pump.

If you have high vaccum/pressure and can't increase the expansion any more of your penis lengthwise in relation to this sticker ruler, you should ease on the vaccum/pressure. I believe this is mostly a safty thing.

 

[huge-girth]

Indeed.

The rulers are just guidelines for keeping safe pressure, since there are no gauge on a Bathmate pump.

If you have high vaccum/pressure and can't increase the expansion any more of your penis lengthwise in relation to this sticker ruler, you should ease on the vaccum/pressure. I believe this is mostly a safty thing.

You are correct. I asked the above question because I haven't gotten to 8 inches mark inside the pump even when I'm over 8.25 inches in erect measurement. Seems I have a shorter bone press flaccid length.

 

[squirt_inducer_man]

You are correct. I asked the above question because I haven't gotten to 8 inches mark inside the pump even when I'm over 8.25 inches in erect measurement. Seems I have a shorter bone press flaccid length.

Isn't that the case because outside the pump your penis will grow more at length?

But inside the pump the blood will try to expand all the tissue in all the directions (length and girth)? The blood will try to expand all the tissue in all directions, more then in a normal erection outside the pump.

I hope you understand what I'm saying. Sometimes it's hard to explain my thinking.

 

[squirt_inducer_man]

If there are more girth to expand into, it will expand more there before expanding at length?