Sharing pumping pics

[huge-girth]

Isn't that the case because outside the pump your penis will grow more at length?

But inside the pump the blood will try to expand all the tissue in all the directions (length and girth)? The blood will try to expand all the tissue in all directions, more then in a normal erection outside the pump.

I hope you understand what I'm saying. Sometimes it's hard to explain my thinking.

Yes I understand very well.

 

[huge-girth]

If there are more girth to expand into, it will expand more there before expanding at length?

Yes this is true.

 

[squirt_inducer_man]

Yes I understand very well.

I'm not 100% this is what is happening. But this have been my experience with Bathmate pumps. I got very little expansion in length and mostly in girth.

When girth expansion, started to push higher and higer on my shaft inside the cylinder, then later expansion at length would follow inside the cylinder.

 

[BullBarrel]

One thing I've noticed is that, the measurement you see inside the pump is never accurate. When I was at 8.25 inches in 2020, I was getting to 7.5 inches inside the Hydromax X9.

Yes Sir, I’m not using the 8 as an actual measurement, more of a mark I had not reached before. So I see it as a gain (even if temp) because I had not hit 8 in previous sessions.

Also something a little different with me, I’ve had a hard time keeping the berries out, so I am full package pumping. Maybe that why the length. I also pump the water out in very small quick bursts not totally collapsing the pump. I have no idea if this actually makes a difference or not.

 

[Abdiel Bull Berg]

I use the bathmate in the hot tub so that part is easy. Depending on how it goes I may mix the two and figure it’s like doing flat bench dumbbell presses and incline dumbbell presses….just hits a little different.

That’s the only way to find out, and who knows I might try MityVac pumping with water in the future.

 

[huge-girth]

I'm not 100% this is what is happening. But this have been my experience with Bathmate pumps. I got very little expansion in length and mostly in girth.

When girth expansion, started to push higher and higer on my shaft inside the cylinder, then later expansion at length would follow inside the cylinder.

I have same experience you described here. I'm usng the 2.5 cylinder. It's very spacious. So any length increment inside the pump is appreciated because the pump is actually for girth and not length.

 

[huge-girth]

Yes Sir, I’m not using the 8 as an actual measurement, more of a mark I had not reached before. So I see it as a gain (even if temp) because I had not hit 8 in previous sessions.

Also something a little different with me, I’ve had a hard time keeping the berries out, so I am full package pumping. Maybe that why the length. I also pump the water out in very small quick bursts not totally collapsing the pump. I have no idea if this actually makes a difference or not.

Putting your balls inside should make a bit of difference in length increment. Just keep up with your routine and the gains will come in due time.

 

[49-er]

Yep as per my pics I pump to more length in the tighter cylinder than the more spacious girth one

 

[huge-girth]

Yep as per my pics I pump to more length in the tighter cylinder than the more spacious girth one

Thanks for this. I've actually told myself that I will be at 8.5 or more inches inside a less larger pump.

 

[49-er]

So I can get roughly extra 0.5 in 2" cylinder over my erect BPEL or around 0.8 extra in the 1.75" . Just want that to stay lol

 

[huge-girth]

So I can get roughly extra 0.5 in 2" cylinder over my erect BPEL or around 0.8 extra in the 1.75" . Just want that to stay lol

Wow, this is insightful. Now I'm no longer bothered about my length size inside the 2.5 cylinder.

 

[DLD]

Incredible

 

[Abdiel Bull Berg]

Don’t honestly know. I found a web site that provided a jelqing routine. I did that for 3 months and then got a bathmate. Then I found this website and bought a lengthmaster at the beginning of June and measured before I got started with SRT. The Jelqing helped with flacid (I have always been 100% a grower)and I noticed some girth improvements…my wife actually asked why I was “meaty”…..LOL
That may have been after I received the bathmate….can’t exactly remember. But to your question I think I have always been between around 6.75 or 7. (Although there was a time when I had gained some weight and my Test levels were in the low 3s that I was around 6 and EQ was poor….that has all improved.

Yeah gotta watch that weight and your testosterone levels. What actually happens when we as men get overweight(been there myself) the fat we put on us makes the testosterone aromatize(convert) into estrogens, as fat and estrogen goes hand in hand.

Glad you got it improved since healthy testosterone levels are so important for not only EQ but also for general well being, fat burning and muscle building.

 

[Abdiel Bull Berg]

So I can get roughly extra 0.5 in 2" cylinder over my erect BPEL or around 0.8 extra in the 1.75" . Just want that to stay LOL

Damn, maybe I’ll buy two cylinders then the next time as in one 1.75 and one 2.125. Need to get that length first so anything that can aid in that I’m all in for.

 

[Barry McCochener]

BSA (Big Schwanz Acht) here...I had to create a new account due to some oddity that didn't allow me to log-in.

Anyway, similar to Bull, I used my Bathmate (I actually have 3 models) all modded w/the VacuVin exclusively until I purchased the MityVac with the goal of sizing the cylinder to restrict girth and apply as much force along the length axis...been using almost every day for 3+ years. My personal best is 21.5 cm and hoping to max it out in the not too distant future (although I've definitely hit a plateau over the last couple of months.

My $0.02 worth? Both the BM and the MityVac have their strengths/weaknesses (although the MityVac wins hands-down for convenience/comfort). I too struggled w/ball-suckage and my solution was to not fight it and I dscovered 'whole-package' pumping. It takes a bit of dexterity to allow them the enter the cylinder w/out sending you to-the-moon with pain, and w/the VacuVin hand-pump, modulating pressure is infinite.

75% of my pumping is in the MityVac due to it's superior convenience and ease of clean-up (I use virgin coconut oil for lube).

 

[CRay2323]

I actually haven’t used a pump in a long time since I am currently focused on length more than girth but I bought this awesome automatic pump so I’ll try and take a pic this week cause it’s hard just seeing my pump sitting there unused….

 

[Barry McCochener]

since I am currently focused on length more than girth

same here...I just sized the cylinder so I'm packing the walls which places more force along the length axis (at least that's how my logical brain sees it)

 

[CRay2323]

So i tried my 2.25 diameter 10” long pump tonight and I think it’s time to move up to my 2.5” diameter tube because I lubed up and still think I’m hitting the walls stopping me from reaching max length cause I measured and I hit 7.5-7.75” and that my normal erection length length. I think hitting the walls is stopping me. I bought this one cause at first the 2.5” was too big but I have gained girth even without trainjng for it so i will re try tomorrow with the 2.5” tube. You can even see in the pic below my foreskin isn’t fully retracted and when I’m fi hard it retracts and shows my entire head so I know this isn’t max length but here is a first shot at a pic

 

[Barry McCochener]

So i tried my 2.25 diameter 10” long pump tonight and I think it’s time to move up to my 2.5” diameter tube because I lubed up and still think I’m hitting the walls stopping me from reaching max length cause I measured and I hit 7.5-7.75” and that my normal erection length length. I think hitting the walls is stopping me. I bought this one cause at first the 2.5” was too big but I have gained girth even without trainjng for it so i will re try tomorrow with the 2.5” tube. You can even see in the pic below my foreskin isn’t fully retracted and when I’m fi hard it retracts and shows my entire head so I know this isn’t max length but here is a first shot at a pic

have you tried entering the cylinder at 100% EQ?

 

[CRay2323]

have you tried entering the cylinder at 100% EQ?

I actually haven’t. I have very little experience with pumps

 

[DLD]

Always entered the Erect. You want to be close to erect as possible to get the best results.

 

[Barry McCochener]

I actually haven’t. I have very little experience with pumps

definitely give that a try (and pay very close attention to what your body is telling you)

 

[CRay2323]

Always entered the Erect. You want to be close to erect as possible to get the best results.

definitely give that a try (and pay very close attention to what your body is telling you)

Thanks guys. I’ll try it next time with my larger tube

 

[BFL]

Here is my Pic.. I'm probably little longer as I'm using a comfort ring by another vendor which is much thicker than the Mos

 

[DLD]

Here is my Pic.. I'm probably little longer as I'm using a comfort ring by another vendor which is much thicker than the Mos

Looking like your packing the tube! Just wow!

 

[bandit2010]

Solid 7.5 in the tub and I am pretty much packing it right, tube is a 2 inch.

 

[DLD]

Impressive

 

[49-er]

 

[49-er]

Me in my 2.00 last night

 

[squirt_inducer_man]

If you pack a tube will that remove your banana bend (upward curve)? This is my biggest fear of having a to narrow tube.

 

[BullBarrel]

I was reading a couple other posts on a different board. They were making the claim that pumps in general are bad for EQ. What are your feelings about that statement?

 

[orgasmic19]

I was reading a couple other posts on a different board. They were making the claim that pumps in general are bad for EQ. What are your feelings about that statement?

I don’t believe so if anything if you are not getting good blood flow meaning as you get older you need some way to maintain length and girth.

Logically I would think of it this way if you are not achieving nightly erections you have to get some kind of penile exercise to help maintain your current size if not you will lose it.

 

[DLD]

I don’t believe so if anything if you are not getting good blood flow meaning as you get older you need some way to maintain length and girth.

Logically I would think of it this way if you are not achieving nightly erections you have to get some kind of penile exercise to help maintain your current size if not you will lose it.

Exactly

 

[Barry McCochener]

long-time pumper here...no EQ issues (actually quite the opposite)

 

[Exterminate2045]

wow 5 pages on my thread

 

[DLD]

wow 5 pages on my thread

It is a great topic

 

[trman]

If you pack a tube will that remove your banana bend (upward curve)? This is my biggest fear of having a to narrow tube.

I'm afraid of this also. It may be the only thing my wife likes about me.

 

[squirt_inducer_man]

I'm afraid of this also. It may be the only thing my wife likes about me.

Glad I'm not the only one.
Banana penises are hard to measure, but I don't want to have a straight penis.

Don't say that. I'm sure there are other things she likes about you.

 

[49-er]

No one made that banana shaped pump cylinder yet lol

 

[DLD]

Glad I'm not the only one.
Banana penises are hard to measure, but I don't want to have a straight penis.

Don't say that. I'm sure there are other things she likes about you.

Same here

 

[Exterminate2045]

Doing 5" hg pressure. What would be the ideal to shoot for? Or should I stay currently where I am at?

 

[Abdiel Bull Berg]

Doing 5" hg pressure. What would be the ideal to shoot for? Or should I stay currently where I am at?

Personally I like going up to at least 15 hg and even over that for a short amount of time. At 5 and 10 hg it feels like nothing to me, that’s why I always go up to at least 15 hg and sometimes close to 20 hg. Not saying you should do this though.

Guess my penis has gotten conditioned to that high of a pressure from using the Bathmate HydroXtreme 9. My point is if you haven’t even tried going up to 10 hg then I would suggest you trying it out and just release the pressure if you experience any discomfort or pain.

 

[Wrenchead41]

Just started with the pumping routine, only two weeks at it. 2.5” x 12” tube. Having a lot of fun so far

 

[DLD]

wow!

 

[squirt_inducer_man]

Just started with the pumping routine, only two weeks at it. 2.5” x 12” tube. Having a lot of fun so farView attachment 1834011

Are you going for 7.85 Inch in Erected Girth?
In the picture your girth is 7.85 Inch in Erected Girth at the BASE right now. That's amazing.

 

[Wrenchead41]

Are you going for 7.85 Inch in Erected Girth?
In the picture your girth is 7.85 Inch in Erected Girth at the BASE right now. That's amazing.

Some crazy stuff happens at the base when I don’t use the pussy looking sleeve that came with the pump. It’s like the fat around the base gets sucked up into the pump, happens right away once I get to 5”hg. The goal is to get to 9x6.5.

 

[squirt_inducer_man]

Some crazy stuff happens at the base when I don’t use the pussy looking sleeve that came with the pump. It’s like the fat around the base gets sucked up into the pump, happens right away once I get to 5”hg. The goal is to get to 9x6.5.

Okey. I understand.

 

[Dave4139]

Personally I like going up to at least 15 hg and even over that for a short amount of time. At 5 and 10 hg it feels like nothing to me, that’s why I always go up to at least 15 hg and sometimes close to 20 hg. Not saying you should do this though.

Guess my penis has gotten conditioned to that high of a pressure from using the Bathmate HydroXtreme 9. My point is if you haven’t even tried going up to 10 hg then I would suggest you trying it out and just release the pressure if you experience any discomfort or pain.

just ordered a Mity today. Currently have a BM hydro max 7. Interesting that you say the BM has a high pressure.
Either way. Reading here and learning from others.
I ordered a thinner tube to
Try and gain some length from it.

 

[DLD]

just ordered a Mity today. Currently have a BM hydro max 7. Interesting that you say the BM has a high pressure.
Either way. Reading here and learning from others.
I ordered a thinner tube to
Try and gain some length from it.

Great method for length! The Mityvac is extremely versatile

 

[Abdiel Bull Berg]

just ordered a Mity today. Currently have a BM hydro max 7. Interesting that you say the BM has a high pressure.
Either way. Reading here and learning from others.
I ordered a thinner tube to
Try and gain some length from it.

Good for you brotherman, really think you’ll like the MityVac, I know I do and it’s a big+ that you can monitor the pressure you’re using.

And I do the exact same thing, using a thinner 2 inch tube to focus mostly on length, though it definitely does boost my girth too.