pumping and marks on glans

Welnove

New member
I keep getting on my glans, I assume, burst blood vessels? Some are small and other kind of sizeable, the bigger ones made me stop. Dark marks are left behind where it happens. I've been pumping about a year +.

I had severe issues with discoloration on shaft in general. But started getting more and more dots on glans too. So I stopped for over a month, let everything heal. The dark marks dont fade.....they just stay there, going on two months now, maybe they are less apparent now though.

Restarting, after about a week or two of pumping. Slowly working up to 5g, never over, doing intervals. Going very slow and easy, Not using heat, I've stopped getting dots on shaft. But on the head... I'm still getting them? I feel like at this stage I need to stop. My glans is...very big, does this have to do with it? It presses up against the tube, when most of my shaft doesn't. Can a silicone glans protector or something help? Do I need to go even slower? And just build up a tolerance very, very slow?

I really don't want to stop pumping, but this is getting out of control and I'd rather not have even more marks on my cock head..... Pretty desperate here, any ideas? No heat defintly helped with shaft dots at least


So I'm after realizing, the dots or burst blood vessels I keep getting on my glans, all come from where my head pushes up against the glass. My glans is really, really big and with my upward cure, it easily pushes up against the glass....but my shaft doesn't even come close. The pressure and rubbing against the glass seems to be making small abrasions under the skin and sometimes they are quite bad.

Is there a way to avoid this, will a glans protector work in the pump? Is their a way I can limit glans expansion somehow? I've used a bigger tube...but my glans still hits the glass, and the bigger tube causes so much discoloration is much harder to get a seal, and is too big for me in general.

The marks that are left behind are becoming severe, not fading after a month+ just leaving dark marks where the abrasion happens.

What options do I have here? Is there any way to limit glans expansion, or keep it protected? I don't really need a bigger glans.
 
Welcome to the brotherhood brother.

I keep getting on my glans, I assume, burst blood vessels? Some are small and other kind of sizeable, the bigger ones made me stop. Dark marks are left behind where it happens. I've been pumping about a year +.
Let's take all the info so far into account.

1+ year of pumping. History of blood blister and discoloration, ranging from small to large. Dots on glans (assuming something like a mix of white and dark red?). Dark marks that looks like birthmarks I assume?

I had severe issues with discoloration on shaft in general. But started getting more and more dots on glans too. So I stopped for over a month, let everything heal. The dark marks dont fade.....they just stay there, going on two months now, maybe they are less apparent now though.
Nope. These dark marks will fade over time, but you have been introducing so much burst blood and the accumulation of blood components collected under surface skin is too high in concentration. There is a discussion about discoloration here:


Some brothers here are successful in reduction the discoloration using only MoSRed (red light therapy).

Restarting, after about a week or two of pumping. Slowly working up to 5g, never over, doing intervals. Going very slow and easy, Not using heat, I've stopped getting dots on shaft. But on the head... I'm still getting them?
This is known as hotspots, or weakened skin layer (fascias). It's like a pimple infection that comes and goes at the same spot over and over again because there's a large weakened pocket there already.

I feel like at this stage I need to stop. My glans is...very big, does this have to do with it?
Nope. I have a very large glans myself. Wife loves it. Nothing to do with the spots. Its just bad pumping practices in the past.

It presses up against the tube, when most of my shaft doesn't. Can a silicone glans protector or something help?
Nope. Glans cap doesn't do anything. The glans is the terminal point. It will continue to be the largest end point for the blood to enter and remain until the pressure is released.

Do I need to go even slower? And just build up a tolerance very, very slow?
YES! And triple YES!!! Your skin is very sensitive right now. You have pockets that have yet to heal. You're pushing your skin to exceed its limit constantly. Resume low again, start at 4inHg for 60 seconds, slowly go up to 5inHg for 20 seconds, and drop back to 4inHg for 40 seconds. Back and forth, and back and forth. This is to simply reprogram your skin to expand with proper strengthening.

But never pump without doing the SSJ exercise with the pumping routine. You are trying to expand the inside, not the outside. Try a 5 minutes of SSJ first, before the pumping. BUT MAKE SURE TO WARM UP FIRST.

I really don't want to stop pumping, but this is getting out of control and I'd rather not have even more marks on my cock head..... Pretty desperate here, any ideas? No heat defintly helped with shaft dots at least
You don't have to.

So I'm after realizing, the dots or burst blood vessels I keep getting on my glans, all come from where my head pushes up against the glass. My glans is really, really big and with my upward cure, it easily pushes up against the glass....but my shaft doesn't even come close. The pressure and rubbing against the glass seems to be making small abrasions under the skin and sometimes they are quite bad.
You are partially correct. The dots are burst capillaries. Those capillaries were not properly conditioned under high pressures.

PAID HEED BROTHERS!!! This is an example for brothers with lower pressure tolerances. You don't have to go past 5inHg to see detrimental effects. Conditioning is everything in PE. Zealous routines and over expectations will kill your penis.

Is there a way to avoid this, will a glans protector work in the pump? Is their a way I can limit glans expansion somehow? I've used a bigger tube...but my glans still hits the glass, and the bigger tube causes so much discoloration is much harder to get a seal, and is too big for me in general.
Having a large glans is a wonderful thing. It's never a bad thing. Brothers are chasing after such a prize all the time, including myself. But to solve your issue, yes, having a larger and LONGER cylinder is crucial. For example, if your glans's coronal ridge (the rim of your glans) is 6in, purchase a cylinder with a diameter of 2in for comfort. If you need to go larger, 2.25in diameter cylinder is even better. BUT, if your penis is 6in long, you better get a cylinder that is 8in long. You need that extra buffer space at the top so you don't accidentally suck the tip of the glans with contusion pressure near the pressure valve. Badddddddd thing to do.

If you can, use a pump that support water usages. Read up on this article:


The marks that are left behind are becoming severe, not fading after a month+ just leaving dark marks where the abrasion happens.
The marks can remain as long as years. We can't tell since there is no photo of the mark. Most marks go away in a few months, but long standing marks caused by negligence can last quite a long, long, long time.

What options do I have here? Is there any way to limit glans expansion, or keep it protected? I don't really need a bigger glans.
Let everything expand, but expand smartly. Pump, but pump wisely. In my suggestions, read up on the 5x5x3 for pumping. BUT! Start with the SSJ first. Not the pumping.

I'll let other brothers chime in with their experiences.
 
Upvote 0
Oh wow..... that was incredibly helpful... I was not expecting that, thank you so much! I will read up on everything you've said and implement it.

One thing though, you don't think the marks on my glans are from friction? My glans presses right up against the glass on my 2.0 and 2.125 tube...very quickly after pumping. I feel the friction with the pressure is causing the marks. Wouldn't a glans cap help to stop some of the damage?

And yeah....just to say, I know big glans is great and I'd like bigger....but if the problem is coming from friction.....I'd take no gains for no further marks/daamge.


1+ year of pumping. History of blood blister and discoloration, ranging from small to large. Dots on glans (assuming something like a mix of white and dark red?). Dark marks that looks like birthmarks I assume?
yes something like small birth marks, they are kind of brown in appearance after it heals, some look something akin to like a pimple before theyve healed....
 
Last edited:
Upvote 0
One thing though, you don't think the marks on my glans are from friction? My glans presses right up against the glass on my 2.0 and 2.125 tube...very quickly after pumping. I feel the friction with the pressure is causing the marks. Wouldn't a glans cap help to stop some of the damage?
Friction is only 0.5% of the 99.5% of the other problems. If your pump is safe, use Vaseline or lubrication that doesn't damage the pump.
 
Upvote 0
Friction is only 0.5% of the 99.5% of the other problems. If your pump is safe, use Vaseline or lubrication that doesn't damage the pump.
Damn, I just spent so much on caps, haha. Oh well, good to know at least.

My reasoning was, I was using 2.125 cylinder, and I was having no issues with glans discoloration. I felt thought that the 2.0 was the better fit, it's once I switched to the 2.0 that I started getting marks on glans more and more.... I figured it's cause the head is pressing right up against the glass hard. I have been using a lot of lube, I thought I was going pretty slow, but I guess not as I was doing after 1 week of pumping. 2 min sets at 5g for 15 mins total, taking a break at 6 mins.

I decided to take a month break to heal, and start over. Starting again, I did a warm up before sets, but used no heat. Now I don't know if it's the tubes to small for glans, or the lack of heat starting, but I wasn't having issues with the tube I had before....everything started when I downsized

1+ year of pumping. History of blood blister and discoloration, ranging from small to large. Dots on glans (assuming something like a mix of white and dark red?). Dark marks that looks like birthmarks I assume?
yes something like small birth marks, they are kind of brown in appearance after it heals, some look something akin to like a pimple before theyve healed small rounded sort of blemishes and like the skin is no longer smooth and clear once theyve healed, almost like resiude acne marks or something under the skin....

How long would you recommend to wait to heal before starting to pump again?
 
Last edited:
Upvote 0
yes something like small birth marks, they are kind of brown in appearance after it heals, some look something akin to like a pimple before theyve healed small rounded sort of blemishes and like the skin is no longer smooth and clear once theyve healed, almost like resiude acne marks or something under the skin....
This is blood blistering with epidermal sore formation. You also have plenty of residual blood and iron radicals all over the upper skin layers.

How long would you recommend to wait to heal before starting to pump again?
Any blood blisterint and broken skin down for 1mm, you need 3 to 4 weeks of full healing time. Once you know the skin cover is thick enough from the healing, resume with the lowest pressure, which is 4inHg. Perform SSJ at minimal force as possible. The moment you see slightly dark red color in the healed area, ease back. The best description is forcing blood into your finger tips and see the light color turning slightly dark. Keep at this for 2 weeks.
 
Upvote 0
his is blood blistering with epidermal sore formation. You also have plenty of residual blood and iron radicals all over the upper skin layers.


I figured I should try get a pic incase my description wasnt accurate, thats about the best pic I could get. Upclose it kind of reduces how red the marks look, but from a distance its easier to see. All the places that look red are where the marks are....zooming up close like that makes it look differnt though like I've cut the skin in all those areas or made it raw through friction from pump/masturbation and rubbing glans too hard?
 
Last edited:
Upvote 0
I figured I should try get a pic incase my description wasnt accurate, thats about the best pic I could get. Upclose it kind of reduces how red the marks look, but from a distance its easier to see. All the places that look red are where the marks are....zooming up close like that makes it look differnt though like I've cut the skin in all those areas or made it raw through friction from pump/masturbation and rubbing glans too hard?
Got it. It's quite common. It's actually eczema. Some dermatologists like to group it into atopic dermatitis, commonly caused by moisture, chemicals in the water, or skin reactions due to expansion past the normal dermal flexibility.

Most brothers here use a hydrocortisone cream after each complete workout, or a combo of skin care oil such as coconut oil, jojoba oil, castor oil, liquid Vit E, and many other. But for dermatitis conditions, hydrocortisone is the best approach. 1% is a good start. 0.5% for long term uses. 2% is for short term uses to reduce the issues faster. 5%, that must be obtained from the doctor if you are too worried about it.
 
Upvote 0
Damn that sounds bad, you really think its that? I think it looks crazy up close and kind of misleading.....from a distance its just a few dark brown marks....and like when it happens from the pump....I can see the blood under the skin. I see it on alot of people who do PE too....just smaller and less then I have atm.

Wouldn't eczema be very itchy and have a host of issues? I wouldn't even know it was there if I didn't look at it, theres no iritation whatsoever. Is there other options outside of hydrocortisone? I'm very hesitant on using taht...

Thank you for all the advise.
 
Last edited:
Upvote 0
Damn that sounds bad, you really think its that?
Eczema is not bad. It's typical. They all got grouped up under dermititis issues. Doing PE, you are placing stresses on the skins and tissues. Dermatitis will always happen.

I think it looks crazy up close and kind of misleading.....from a distance its just a few dark brown marks....and like when it happens from the pump....I can see the blood under the skin. I see it on alot of people who do PE too....just smaller and less then I have atm.
You are worrying over nothing. It's very typical. The spots, be the dark spots or the little nodules, will go away. Skin care products will make them go away faster. I can see mine after 4 continuous days of intense PE and pumping. You normally don't see the nodules with moderate and light pressures.

Wouldn't eczema be very itchy and have a host of issues? I wouldn't even know it was there if I didn't look at it, theres no iritation whatsoever.
Nope. Eczema has many conditions. It can be just dry skin, and can be as bad as itchy blisters. Eczema has way too many conditions to define as "oh crap, this is bad" to "eh, next!" It's all grouped as, "make your own logical decision".
 
Upvote 0
Eczema is not bad. It's typical. They all got grouped up under dermititis issues. Doing PE, you are placing stresses on the skins and tissues. Dermatitis will always happen.


You are worrying over nothing. It's very typical. The spots, be the dark spots or the little nodules, will go away. Skin care products will make them go away faster. I can see mine after 4 continuous days of intense PE and pumping. You normally don't see the nodules with moderate and light pressures.


Nope. Eczema has many conditions. It can be just dry skin, and can be as bad as itchy blisters. Eczema has way too many conditions to define as "oh crap, this is bad" to "eh, next!" It's all grouped as, "make your own logical decision".
This is why it is so important to use Hydrocortisone as this will eliminate the dry skin and keep your penis in tip top shape. Don't worry about spots and dark spots including nodules, as time progresses these issues will resolve themselves.
 
Upvote 0
You guys are really great.... I asked for help elsewhere and got basically nothing. Thank you so much for the reassurance. I'm really wary of using hydrocortisone on my dick though.... I had issues with skin thinning from it in the past so the idea of using it again.... and on my cock.... ahaha. I'd really rather not use that, will it still heal okay without it?
 
Upvote 0
You guys are really great.... I asked for help elsewhere and got basically nothing. Thank you so much for the reassurance. I'm really wary of using hydrocortisone on my dick though.... I had issues with skin thinning from it in the past so the idea of using it again.... and on my cock.... ahaha. I'd really rather not use that, will it still heal okay without it?
If you have skin thinning conditions due to the skin atrophic interaction with corticosteroids, you can reduce the total strength to 0.5% rather than the common 1% or 2%. They even have the 0.1% version. You can also use oil blending alternative with greater successes via holistic methods over pharma-grade. Most brothers here tend to use the holistic approaches over the pharma-grade. It's a bit more expensive, but in the long run, it's quite more healthy. Something like this:

 
Upvote 0
You guys are really great.... I asked for help elsewhere and got basically nothing. Thank you so much for the reassurance. I'm really wary of using hydrocortisone on my dick though.... I had issues with skin thinning from it in the past so the idea of using it again.... and on my cock.... ahaha. I'd really rather not use that, will it still heal okay without it?
Yes it will heal on its own but Hydrocortisone will speed the process. Also for open sores grab some bactracin is a amazing healer. I understand your concerns with Hydrocortisone but using our 1% Hydrocortisone it does not cause skin thinning that would only happen when using a prescription strength does cause skin thinning. I have been using Hydrocortisone for 22 years and I have never had skin thinning.
 
Upvote 0
This is such great knowledge...it's really nice to read things from experienced people for once...
Thank you so much guys.
You are so welcome my Brother! May Jesus bless you on every part of your journey.
 
Upvote 0
Hey guys, back :)

Well, they did heal, but I'll say it doesn't look great, dark marks and more than that its texture like bumps and stuff...it makes me self concious....so not great... but it's not awful.

anyways, I decided to try pumping again. This time about 3g's 1/ 2 min set, and about 4/5 mins total. I did it under intense light so I could pay attention to changes. Maybe after 2/3 mins all the dark marks start to become more prominent and I'm staring to see more marks....maybe smaller older ones? are becoming more apparent...ones I didn't notice before maybe? from the increased blood flow? I don't know...

I don't know if its cause I'm under intense light, I don't know how guys cock heads are supposed to look under those conditions. I felt aftewards that there were no ontop injuries, no bleeding, it kinda of looks like one or 2 tiny pin prick red dots under the skin though....again, and generaly not good, like marks, darkness under the top layer of skin....not too apparent, but its there.... I don't know if this is normal or what, and it's okay unless their is visible big ruptures/blood spots. I never paid attention to it before....and I guess that caused it in the first place....so I don't know what I'm supposed to be seeing, especially under intense light

Kinda freaked out again, haha. I really don't want it to look even worse.... so maybe I really have to quit. I'll give it a few days and see how it looks.
 
Last edited:
Upvote 0
Hey guys, back :)

Well, they did heal, but I'll say it doesn't look great, dark marks and more than that its texture like bumps and stuff...it makes me self concious....so not great... but it's not awful.

anyways, I decided to try pumping again. This time about 3g's 1/ 2 min set, and about 4/5 mins total. I did it under intense light so I could pay attention to changes. Maybe after 2/3 mins all the dark marks start to become more prominent and I'm staring to see more marks....maybe smaller older ones? are becoming more apparent...ones I didn't notice before maybe? from the increased blood flow? I don't know...

Way too conscious of your penis now. Most penises have bumps and odd marks we do not pay attention to before. Just keep it beautified by using proper ointments and oils to keep the skin nice subtle.

I don't know if its cause I'm under intense light, I don't know how guys cock heads are supposed to look under those conditions. I felt aftewards that there were no ontop injuries, no bleeding, it kinda of looks like one or 2 tiny pin prick red dots under the skin though....again, and generaly not good, like marks, darkness under the top layer of skin....not too apparent, but its there.... I don't know if this is normal or what, and it's okay unless their is visible big ruptures/blood spots. I never paid attention to it before....and I guess that caused it in the first place....so I don't know what I'm supposed to be seeing, especially under intense light

You notice how we start paying attention to our face after we injured ourselves, but don't care if we have tons of acnes and blackheads before that.

Kinda freaked out again, haha. I really don't want it to look even worse.... so maybe I really have to quit. I'll give it a few days and see how it looks.

Just keep a regiment of a healthy penis during PE. As long as you don't have warped penis, something looks like a bubble of a tire, or something growing off of it, you are good to go.
 
Upvote 0
Thanks for giving me some perspective, you are defintly right. I'm over analyzing now and taking it to far.

I will say though...I have been paying attention to what it looks like normaly, without pumping. Now a day or two after, there is extra dark marks here and there. So it is leaving new marks, you think it's nothing to worry about?

To me, they look like blemishes under the skin, almost like acne....I just don't want it to get to the stage where its covered in those marks and a girl is like....wtf is wrong with your dick... you know

As maybe there is something unique? going on with how easily the under skin seems to be tearing for me and maybe I need to intervene and stop early...and maybe I need to find an alternative? Nothing else I've tried gives that erection quality increase like pumping though......clamping was next best I found, and I hate clamping and don't want to do it.

I remember what you said about trying water pumping, so I did use an old bathmate beforehand...but I don't do well with that thing, haha. It's almost unusable for me, but I did see that there was zero discorlation or marks on glans after using. Maybe water pumping is the answer? Unfortunatly I can not afford a new pump....maybe I could make my air pump a water one?
 
Upvote 0
To me, they look like blemishes under the skin, almost like acne....I just don't want it to get to the stage where its covered in those marks and a girl is like....wtf is wrong with your dick... you know

As long as your penis doesn't look like a Frankenstein dick, she will just enjoys the pleasures.

As maybe there is something unique? going on with how easily the under skin seems to be tearing for me and maybe I need to intervene and stop early...and maybe I need to find an alternative? Nothing else I've tried gives that erection quality increase like pumping though......clamping was next best I found, and I hate clamping and don't want to do it.

Pumping is perfectly fine. Just recondition your penis slowly from low pressures to moderate pressures. Your skin is still sensitive to expansions. That is quite normal. Some PE brothers took as long as 1 year just to overcome the skin softness and tearing issues, be with air or water. Let's restart again with water, warm to hot, and lower pressures.

I remember what you said about trying water pumping, so I did use an old bathmate beforehand...but I don't do well with that thing, haha. It's almost unusable for me, but I did see that there was zero discorlation or marks on glans after using. Maybe water pumping is the answer? Unfortunatly I can not afford a new pump....maybe I could make my air pump a water one?

Give that a try. Water is a better way to go in my book, but each person is different. Give all avenues a try first for at least 3 months.
 
Upvote 0
Yeah, I think I'll try recondition via water pumping based on all the stuff I've read in the post you linked earlier. Then when its conditioned, see if I can normal pump again.

Only thing is, how do I turn my normal pump into a water one? I read to get a "water trap"? Whatever that is..... I'm european, and not getting any results for anything to buy. Just new pumps, no like....attachement? Can't find absolutey anything searching water trap, so I guess the name is wrong?

Btw, something I was considering, perhaps I'm causing tearing by how I pump? I try to take it slow, increase pressure slow...Like I read to do. Except in two cases, first.... to get a seal. I find it really hard to get a seal that way, so when starting I very rapidly do small pumps until it stablizes and it's sealed.

Secondly, sometimes I just can't get the pump to stay at a certain point on the gauge, it goes down super fast, so I'm pumping it say.....from 4 back up to 5 like every second with small little pumps, just trying to keep it at that point. Maybe this is bad pumping practice and causing the tears? I have no idea....something I just thought as to why I'm having so much issues.
 
Last edited:
Upvote 0
Yeah, I think I'll try recondition via water pumping based on all the stuff I've read in the post you linked earlier. Then when its conditioned, see if I can normal pump again.

Only thing is, how do I turn my normal pump into a water one? I read to get a "water trap"? Whatever that is..... I'm european, and not getting any results for anything to buy. Just new pumps, no like....attachement? Can't find absolutey anything searching water trap, so I guess the name is wrong?

This is based on the size of your tube inner diameter, and the avaialability of delivery to your region. See the keywords in the following image.

1000009346.webp

Btw, something I was considering, perhaps I'm causing tearing by how I pump? I try to take it slow, increase pressure slow...Like I read to do. Except in two cases, first.... to get a seal. I find it really hard to get a seal that way, so when starting I very rapidly do small pumps until it stablizes and it's sealed.

This is where a quality pump is needed where you don't have to worry about a bad seal. If you do have a good pump, the poor seal may be an issue from bad skin to cylinder seal, or just component. A seal should be established immediately during the initial low pressure pumping

Secondly, sometimes I just can't get the pump to stay at a certain point on the gauge, it goes down super fast, so I'm pumping it say.....from 4 back up to 5 like every second with small little pumps, just trying to keep it at that point. Maybe this is bad pumping practice and causing the tears? I have no idea....something I just thought as to why I'm having so much issues.

Yep. Bad component seal or just bad skin to cylinder sealing. You have to figure out which. Me, I shove the cylinder against my stomach and pump. If that seals, it's the prepping of the crotch. Hair will cause bad sealing. If it leaks at the stomach, you got a bad component seal.
 
Upvote 0
This is based on the size of your tube inner diameter, and the avaialability of delivery to your region. See the keywords in the following image.

View attachment 1840071



This is where a quality pump is needed where you don't have to worry about a bad seal. If you do have a good pump, the poor seal may be an issue from bad skin to cylinder seal, or just component. A seal should be established immediately during the initial low pressure pumping



Yep. Bad component seal or just bad skin to cylinder sealing. You have to figure out which. Me, I shove the cylinder against my stomach and pump. If that seals, it's the prepping of the crotch. Hair will cause bad sealing. If it leaks at the stomach, you got a bad component seal.
Or simply shave the hair. I always shaved and never had a seal issue. Also if you are going to buy a pump I highly recommend the MityVac.
 
Upvote 0
Thanks for the image....I gotta say though...I searched those keywords and now I'm more confused than ever. I'm getting links for sceience appartuses, huge things costing 300 dollars, and a bunch of stuff |'m sure is wrong. What exactly is it that I'm supposed to be searching for? Surely its something simple and searchable on amazon?
 
Upvote 0
Or simply shave the hair. I always shaved and never had a seal issue. Also if you are going to buy a pump I highly recommend the MityVac.

I think thats my issue yeah....the hair, but I like having hair there....damn, maybe I'll have to do it now.
Also, can't afford one right now, but I have my eyes on it. Only, is it buyable in eu?
 
Upvote 0
Thanks for the image....I gotta say though...I searched those keywords and now I'm more confused than ever. I'm getting links for sceience appartuses, huge things costing 300 dollars, and a bunch of stuff |'m sure is wrong. What exactly is it that I'm supposed to be searching for? Surely its something simple and searchable on amazon?
ah nvm, i just ordered a full kit it has the parts, pretty cheap so no big deal
 
Upvote 0
Thanks for the image....I gotta say though...I searched those keywords and now I'm more confused than ever. I'm getting links for sceience appartuses, huge things costing 300 dollars, and a bunch of stuff |'m sure is wrong. What exactly is it that I'm supposed to be searching for? Surely its something simple and searchable on amazon?

Yes, larger reservoirs or container enters into the science arena. You can also find them on AliExpess and Temu as well.
 
Upvote 0
I think thats my issue yeah....the hair, but I like having hair there....damn, maybe I'll have to do it now.
Also, can't afford one right now, but I have my eyes on it. Only, is it buyable in eu?
You really only need to shave the area where equipment touches the skin. It will cause irritation at first but after a couple weeks this will fade. Worth it for better gains.

Yes we ship worldwide.
 
Upvote 0
You really only need to shave the area where equipment touches the skin. It will cause irritation at first but after a couple weeks this will fade. Worth it for better gains.

Yes we ship worldwide.

Cool, I think I'd likely want to get it at some point, hoping the delivery isnt too much.

Is there anything I should know, or any guides on forums about converting an air pump into a water one? Anything to look out for? I assume it's basically the same as bathmate, but with a gauge? Also, I should be on lower pressure right, because water makes it more intesnse? Or something...
 
Upvote 0
Well, the kit came today. As soon as I attach the water resovior, it's literally impossible to get any sort of pressure in the pump, I don't know if its the distance or if their is some sort of air leak but it doesn't work at all. Not sure what to do now.
 
Upvote 0
Well, the kit came today. As soon as I attach the water resovior, it's literally impossible to get any sort of pressure in the pump, I don't know if its the distance or if their is some sort of air leak but it doesn't work at all. Not sure what to do now.

Look carefully at the 1L reservoir. Do you see the 3rd hole? 2 are meant for the hoses using the barbs. One in the middle meant for quick release or gas release. That hole needs to be plugged up. That hole normally comes with a small cap, or you can use anything to plug it up with, be gum, harden gel, a similar sized cap, or even your finger.
 
Upvote 0
Take your time in this case as it needs to be perfected to make it work. It's worth the investment.
 
Upvote 0
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    I am Sun is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Tdg2021 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Bigtigger17 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    kajifart is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Georgeludwigs is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Looking2grow78 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    qaz17899 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    hjdfifm is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    olobolo is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Moniqumyers is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    bagyshat is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    lengthnewbie is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    NB2025_w4s is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    bloodeagle1990 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Wallacelennas is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    MadGlint is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Mack707 is our newest member. Welcome!
  • N @ NorfolkPumper:
    hey, anyone want to chat? pvt me
    Quote
  • MoS Notifier MoS Notifier:
    itsjustmeinhere321 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Williamsgarys is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    dor.d is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Salmonroberts is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Here4trip is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    bgwalls is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    bwcwannabe is our newest member. Welcome!
      MoS Notifier MoS Notifier: bwcwannabe is our newest member. Welcome!
      Back
      Top