Problem with LM

I

IVEADREAM

0
The no slip pad on the top piece on my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] has come off. What is the best glue to use to glue it back on so as not to damage the pad or the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words]?
 
haha both pads slipped off the chamber i just attach them back n they dont come off while im exercisng,but yeah a good glue can be helpful.
 
I always go for the loctite brand it dries like in five seconds, and grips really good.
 
Muffbuster;669695 said:
I just stuck mine back on & used heavy duty staples
Click to expand...

Now that's an idea. I guess no problem with the head of the staple poking back thru the pad?
Also what kind of staple did you use as far as guage and leg length?
 
IVEADREAM;669715 said:
Now that's an idea. I guess no problem with the head of the staple poking back thru the pad?
Also what kind of staple did you use as far as guage and leg length?
Click to expand...

This is the first I have heard about the pads. I will send this to LIGHTNING and see if we can make a change here. You guys have to let me know these things so we can continue to perfect the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words].
 
doublelongdaddy;669718 said:
This is the first I have heard about the pads. I will send this to LIGHTNING and see if we can make a change here. You guys have to let me know these things so we can continue to perfect the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words].
Click to expand...

Then while we're on the subject, has anyone else notice the forward "bite" when the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] is tightened down around the penis? I've noticed with the placement of the bolt holes that they tend to be more towards the front of the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] then center which in my case gives the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] more of a forward bite. This might be by design I just noticed that it did it. I can actually push down on the back (towards the body) and it kinda of "levels" out. Just curious if anybody else noticed ?
 
IVEADREAM;669776 said:
Then while we're on the subject, has anyone else notice the forward "bite" when the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] is tightened down around the penis? I've noticed with the placement of the bolt holes that they tend to be more towards the front of the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] then center which in my case gives the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] more of a forward bite. This might be by design I just noticed that it did it. I can actually push down on the back (towards the body) and it kinda of "levels" out. Just curious if anybody else noticed ?
Click to expand...

Bump. Could you explain this "forward 'bite'" more?
 
IVEADREAM;669776 said:
This might be by design I just noticed that it did it. I can actually push down on the back (towards the body) and it kinda of "levels" out. Just curious if anybody else noticed ?
Click to expand...

Have you experimented with the wrap to level it?
 
kyomoto;669795 said:
Bump. Could you explain this "forward 'bite'" more?
Click to expand...
I'll try. Without a picture I know it's hard to understand. Try this. Hold out your left hand flat palm facing down. Picture the bolt holes would be between your pointer finger and your middle finger. Now mentally as you tighten the bolts slowly twist your hand to the right (or clockwise) so that your thumb goes towards the ground.This is the "foward bite". If the bolts were dead center of your hand as you tightened the bolts your hand would stay flat and go straight to the ground instead of twisting. I would think that way (straight down ) would be better pressure distribution across the penis instead of the "forward bite " but like I said it might be by design.
Now ain't that clear as mud?
 
templnite;669837 said:
Have you experimented with the wrap to level it?
Click to expand...
Yeah my wrap is pretty level basically. I personally think it's the placement of the bolt holes and again that might be by design to have it have a little forward bite to help from keeping it from slipping off. I don't know. I would just think it would cause a pressure point by having it do that.
If you or for those that have a [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] look and see where the holes are placed on yours.
 
I wanted to add this in a separate post.

I am in no way knocking the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words]. I love my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words]. I think it is a great tool and I believe it's what is really going to help me achieve my goals. Aside from the pad coming off (which by the way I did fix with a little super glue and a couple of staples ) the other thing is just stuff I notice. I just wanted to make that clear.
 
IVEADREAM;669840 said:
Yeah my wrap is pretty level basically.
Click to expand...

So you never tried to use a little more wrap on the backside to even out the elevation? I know they wrote something about this recently, but I don't quite remember man.

I think it has to do with tightening it then stretching it out a little, so you can tighten it fully this time. Do you tighten all the way down at one time, or do you do it gradually so the tunica has time to flatten properly?
 
Last edited:
templnite;669850 said:
So you never tried to use a little more wrap on the backside to even out the elevation? I know they wrote something about this recently, but I don't quite remember man. I think it has to do with tightening it then stretching it out a little, so you can tighten it fully this time.
Click to expand...
Actually it would need more wrap on the front side (towards the glans) to level it out which I do have a little more towards the glans to help fight my skin roll over problem.
 
Maybe if you tightened it halfway so that it has time to flatten properly, then tighten it hard once it has more or less flat shape? Maybe alternating screws instead of both simultaneously?
 
doublelongdaddy;669718 said:
This is the first I have heard about the pads. I will send this to LIGHTNING and see if we can make a change here. You guys have to let me know these things so we can continue to perfect the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words].
Click to expand...

yeah once those details get solved the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] will be one of the most perfect PE masterpieces! evenso is the device to look up to:cool:
 
Yup. Same here. I leave the [words=http://www.mattersofsize.com/join-now.html]power assist[/words] attached so as to spread the load more evenly. If I use just the hanger, it tightens to much on the front like you said. More wrap will help until you get into heavier weights, then you have to start all over. Do you leave the handle attached? It does take time to become accustomed to due to tightness but as you increase weight, the problem increases. I'll flip the assist around sometimes to see how it feels also. Just to clarify, attach all pieces together and see how it works for you. It helped me. It's just the design of the length matter. Still love it though.
 
runningignus;669860 said:
Yup. Same here. I leave the [words=http://www.mattersofsize.com/join-now.html]power assist[/words] attached so as to spread the load more evenly. If I use just the hanger, it tightens to much on the front like you said. More wrap will help until you get into heavier weights, then you have to start all over. Do you leave the handle attached? It does take time to become accustomed to due to tightness but as you increase weight, the problem increases. I'll flip the assist around sometimes to see how it feels also. Just to clarify, attach all pieces together and see how it works for you. It helped me. It's just the design of the length matter. Still love it though.
Click to expand...

Hey thinks I'll try it with the [words=http://www.mattersofsize.com/join-now.html]power assist[/words] part on my next session. When you say heavier weight how much weight are you talking about? I moved up to 17.5 lbs yesterday. So far my wrap has been holding up pretty good but I've been wondering about it once I hit the 20 lbs + mark.
 
We have solved the problem, new cement being used. For those who have had issues use Gorilla Glue, it will last forever.
 
doublelongdaddy;669897 said:
We have solved the problem, new cement being used. For those who have had issues use Gorilla Glue, it will last forever.
Click to expand...

There you go. I use gorilla glue for my hair.
 
kyomoto;669924 said:
There you go. I use gorilla glue for my hair.
Click to expand...

What? That shit will never come out! My families printing company does all their printing:)
 
doublelongdaddy;670331 said:
What? That shit will never come out! My families printing company does all their printing:)
Click to expand...

Yeah. Works on my hair it's great. Your family uses it for printing?
 
Hahaha I can't figure out if DLD knew that and joked about the printing company or didn't know hahaha. Gorilla Snot does wonders for hair though. Probably stab people with the spikes.
 
kyomoto;670507 said:
Nah, sometimes we need to hit that maximum speed.
Click to expand...

being a wise Peer is not that easy too much intensity can injure the units,not doing the exercises correctly can get us no results,and a terrible waste of time.

But yeah going full speed is a good thing sometimes lol
 
doublelongdaddy;670522 said:
No, we do the printing for Gorilla Glue. Gorilla Glue is an unbelievably strong glue. It will hold the pads forever and we are switching over to this glue on the next reorder.
Click to expand...

oh okay misunderstood
 
kyomoto;670874 said:
Plausible, I only do my hair rarely. When I want huge ass spikes i use gorilla GLUE
Click to expand...

That just hold forever!
 
When I was a punk rocker I used to use Elmer's Glue or Ivory Soap, both kept my Mohawk up for days.
 
Well, you live there no? I'm here representing The Nigguh Foundation evil empire :/
 
kyomoto;671206 said:
No I live in Kansas, I don't know any foundation like that. Sounds lame.
Click to expand...

Kansas, wow! Do you really get tornadoes like the Wizard of Oz?
 
IVEADREAM said:
The no slip pad on the top piece on my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] has come off. What is the best glue to use to glue it back on so as not to damage the pad or the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words]?
Click to expand...

Any strong glue would do it. You don't have anything to worry about.
 
You must log in or register to reply here.
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    yesterday1 is our newest member. Welcome!
  • oldandlively @ oldandlively:
    @keepingitbig, hello. The Chat is not as often used by the members than the forum. The chat program may be up-to-date, but it's not welcoming as the forum itself.
    Quote
  • MoS Notifier MoS Notifier:
    JohnCMaxwell is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest Sam hi has joined the room.
  • S (Guest) Sam hi:
    How's everyone
    Quote
  • oldandlively @ oldandlively:
    @sam hi, good to see you brother. Post in the forum and we'll chat more.
    Quote
  • MoS Notifier MoS Notifier:
    Akteon1 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest Jayson44 has joined the room.
  • J (Guest) Jayson44:
    hi
    Quote
  • J (Guest) Jayson44:
    Out of sheer curiosity, is anyone interested in having a premature O together while we watch videos?
    Quote
  • J (Guest) Jayson44:
    Anyone wanna cum to asians twerking or kpop vids
    Quote
  • Akteon1 @ Akteon1:
    Hi. Good to be here.
    Quote
  • oldandlively @ oldandlively:
    @Akteon1, good to see you here. Join us into the forum.
    Quote
  • Akteon1 @ Akteon1:
    Which forum? How do I get there?
    Quote
  • oldandlively @ oldandlively:
    @Akteon1, New Member Introduction Forum
    Quote
  • MoS Notifier MoS Notifier:
    McDong is our newest member. Welcome!
  • Akteon1 @ Akteon1:
    I was approached by a coach from a Nigerian phone number?
    Quote
  • MoS Notifier MoS Notifier:
    gabrieljones is our newest member. Welcome!
  • oldandlively @ oldandlively:
    @Akteon1, visit other sub forums to check out all the info in PE. Forum list
    Quote
  • oldandlively @ oldandlively:
    More importantly, see the first three posts in this sub forums to answer most of your doubts and questions: Ask questions
    Quote
  • MoS Notifier MoS Notifier:
    tbean750 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest pedguin has joined the room.
  • P (Guest) pedguin:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Quote
  • H @ huge-girth:
    pedguin said:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Click to expand...
    Sign-up on the forum. Buy the length master and the Silistretcher both from the MOS shop
    Quote
  • P (Guest) pedguin:
    ive been looking at the silistretcher for over half a year, and will look into the length master thank you.
    Quote
      P (Guest) pedguin: ive been looking at the silistretcher for over half a year, and will look into the length master...
      Back
      Top