Lengthmaster wrapping uncut

T

Thebeastymusician

New member
Hey,

I’ve been using the lengthmaster for almost 3 months and I’ve seen some slight gains. I’m not super satisfied with the results so far. Maybe I’ve been wrapping wrong since I’m uncut and not pulling the foreskin back. Because of this I’ve been bleeding during some of my workouts.

I tried to lookup some old threads where uncut guys show there wrapping technics but all the videos and pictures where no longer available. Could someone who’s uncut please show me there way of wrapping which has worked for them.

I’m really excited to make some gains but training like this is not fun. Hope someone could help me!

Thanks!
 
Thebeastymusician said:
Hey,

I’ve been using the lengthmaster for almost 3 months and I’ve seen some slight gains. I’m not super satisfied with the results so far. Maybe I’ve been wrapping wrong since I’m uncut and not pulling the foreskin back. Because of this I’ve been bleeding during some of my workouts.

I tried to lookup some old threads where uncut guys show there wrapping technics but all the videos and pictures where no longer available. Could someone who’s uncut please show me there way of wrapping which has worked for them.

I’m really excited to make some gains but training like this is not fun. Hope someone could help me!

Thanks!
Click to expand...

I'm uncut, but my foreskin is completely detached from my corona, or the rim around the glans. Is yours as well? This is the critical condition for hygienic and PE reasons.
 
  • Strong
Reactions: DLD
I used to pull my foreskin back when wrapping before Lengthmaster sessions.

Just pull your foreskin back while wrapping, and when clamping the Lengthmaster on just make sure that your foreskin is still retracted and squeeze the blood out from your penis head before clamping down hard.

Sorry for not giving a better description, though I think it’s key to keep the foreskin retracted.

If you want better instructions just look at @squirt_inducer_man instruction videos on Lengthmaster wrapping since he’s also uncut and got insane gains from the Lengthmaster in record breaking time.
 
It hurts more when I don’t pull back the foreskin then when I don’t. It’s almost like a cutting sensation. I looked at the videos and noticed that @squirt_inducer_man has less foreskin then I do maybe this has something to do with the pain.
 
Wish I had some better advice for you brother, at least it hurts less with the foreskin retracted.
Just keep on perfecting your wrapping technique and hopefully your problem will be solved that way.

Best of luck brother, believe me I know how frustrating it is when things doesn’t work out. Been in this game since my mid-twenties(41 now)and it’s a lot of trial and error perfecting your PE routine and find what works for you.
 
Got it. I think I know what's going on. I'm just visualizing the bare plates and padding for each side digging in. Brother SIM, myself, and a few others added cushions around our plates and perform the wrapping method. This is mine after a few months of adjustments and take other brothers' methods of comforts and reinforcement:

As for the wrapping, I happened to me ages ago, and at times even now. The cutting feelings causes by the pinching from bad wrapping can be a nightmare. Here's a trick to use. If you need more pictorial guide, let me know. Do take a snapshot of the penile body with the foreskin retract so we can give you a more accurate wrapping approach.
  • I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
  • Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
  • Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
  • Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
  • Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
  • Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
  • The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
  • Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
  • When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
  • Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.
Hope this helps brother.
 
oldandlively said:
Got it. I think I know what's going on. I'm just visualizing the bare plates and padding for each side digging in. Brother SIM, myself, and a few others added cushions around our plates and perform the wrapping method. This is mine after a few months of adjustments and take other brothers' methods of comforts and reinforcement:

As for the wrapping, I happened to me ages ago, and at times even now. The cutting feelings causes by the pinching from bad wrapping can be a nightmare. Here's a trick to use. If you need more pictorial guide, let me know. Do take a snapshot of the penile body with the foreskin retract so we can give you a more accurate wrapping approach.
  • I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
  • Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
  • Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
  • Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
  • Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
  • Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
  • The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
  • Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
  • When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
  • Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.
Hope this helps brother.
Click to expand...
Very concise and detailed description, well written brother, hope it really helps him out.
 
oldandlively said:
Got it. I think I know what's going on. I'm just visualizing the bare plates and padding for each side digging in. Brother SIM, myself, and a few others added cushions around our plates and perform the wrapping method. This is mine after a few months of adjustments and take other brothers' methods of comforts and reinforcement:

As for the wrapping, I happened to me ages ago, and at times even now. The cutting feelings causes by the pinching from bad wrapping can be a nightmare. Here's a trick to use. If you need more pictorial guide, let me know. Do take a snapshot of the penile body with the foreskin retract so we can give you a more accurate wrapping approach.
  • I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
  • Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
  • Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
  • Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
  • Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
  • Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
  • The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
  • Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
  • When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
  • Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.
Hope this helps brother.
Click to expand...
Could you please provide me with some pictures I find it very difficult to wrap it this way.
 
oldandlively said:
Got it. I think I know what's going on. I'm just visualizing the bare plates and padding for each side digging in. Brother SIM, myself, and a few others added cushions around our plates and perform the wrapping method. This is mine after a few months of adjustments and take other brothers' methods of comforts and reinforcement:

As for the wrapping, I happened to me ages ago, and at times even now. The cutting feelings causes by the pinching from bad wrapping can be a nightmare. Here's a trick to use. If you need more pictorial guide, let me know. Do take a snapshot of the penile body with the foreskin retract so we can give you a more accurate wrapping approach.
  • I cut my original TheraBand piece from the package down to half the width. Only do this if you are confident in getting a new one if needed. If not, use the original one in its full size.
  • Fold the width of the TheraBand down to 1in width size. Wrap the initial loop at the base of the penis.
  • Pull the foreskin completely back. Expose as much of the skin below the base of the glans as you can after each loop. Any skin captures inside the loop can cause pinching.
  • Squeeze the blood out of the glans as much as you can. Wrap the second loop around the base of the penis. Don't over tighten your wrap. Just nice and comfortable wrap.
  • Squeeze more blood out if you can. Your glans should be like a nice cigar wrapped with two loops so far. Wrap it for the third time. At this point, most of the blood is out of the glans.
  • Now, tightly wrap your glans with the remaining length. But do distribute the remaining length so the entire wrap is nice and round from the base of the glans to the tip of the glans. This allows a easier time for the wrap to equally clamps down by the plates.
  • The loops at the base of your glans will minimize slippage. The remaining length of the TheraBand supports the glans with protection from pinching.
  • Hold the wrap tightly in your hand and give it a nice steady and hard pull. Any slippage? Any uncomfortable feeling? If there is a pain or pinching sensation, it will manifest at this moment. If that happens, rewrap.
  • When all is good, place your wrapped glans into the plate. The bottom of the wrap at the base of your glans will be slightly inside the plates.
  • Tighten the plates down but not to the point it inflicts pressure pains. Slowly pull on the LM3. You should have a nice solid tug that's comfortable and not slipping. If there is any pain due to slippage, rewrap and try again.
Hope this helps brother.
Click to expand...
I’ve also noticed that the pain is always coming from the base of the glans. Especially when I pull back my foreskin.

I just tried your method but I had a lot of pain. So I left the foreskin. At least it doesn’t hurt as much. But it stills hurts a lot at the end of my session and I start to bleed. Here is a picture of the bleeding.

I tried your method for almost 3 hours with readjusting all the time. I’m getting really desperate now for a good session.
 

Attachments

  • IMG_1223.jpeg
    IMG_1223.jpeg
    1.4 MB · Views: 17
Thebeastymusician said:
I’ve also noticed that the pain is always coming from the base of the glans. Especially when I pull back my foreskin.

I just tried your method but I had a lot of pain. So I left the foreskin. At least it doesn’t hurt as much. But it stills hurts a lot at the end of my session and I start to bleed. Here is a picture of the bleeding.

I tried your method for almost 3 hours with readjusting all the time. I’m getting really desperate now for a good session.
Click to expand...
Got it! The frenulum is the victim. Yes, all PE journeyist have this issue. The short or sensitive frenulum is a primarly restricting factor for quite a bit of devices out there. I had mine professionaly removed. Brothers everywhere doing PE have their own frenulum cut through various methods, either by tying, physically cutting with a sharp instrument, or many methods that cause little to no pain.

However, the frenulum doesn't need to be cut to achieve the same effectiveness for the Length Master. As you have experienced with the Length Master over your foreskin, you get quite a bit of movement. The Length Master uses the glans as a stopping block like every other devices. Using the foreskin will allow the sliding to occur over the stopping block, which is your glans.

Also, by trapping blood in the glans like you have in the photo, you have a good large stopping block for the Length Master to grip onto. At the same, you also create quite a bit of terminal pressure on the glans that can also cause the bleeding as you to up on traction force. Just something to be aware of. Blood inside the glans must be removed as much as possible to prevent bleeding and blistering.

Alright, let try a different approach this time around. However, do let your wound heal for a couple of days before trying. Exercising with an open wound will delay the healing. Since we are dealing with a sensitive or short frenulum, you have to protected it with a padding. You can use the same Theraband, but fold it into a thick layer, either once or twice. The folded layers allow an extra cushion for your frenulum. I did this ages past when I use the traction device that causes my frenulum to bleed just like yours. Perform the same wrapping technique as before. However, this time, make sure all blood exit the glans. You will literally have a mummy of a penis tip before placing it between the plates.
 
So sorry to hear beast, never never should you bleed.

1. I recommend a complete stop until 100% healed
2. I recommend jelqing with coconut oil for 10 minutes prior to your length exercises. my frenulum was acting up during my first PE sessions with water lube (see stats)and I felt like it was holding back my gains before in 2011, now this whole year I've been on coconut oil and I've had zero issues with frenulum expansion
3. Have you ever done Manuals stretches? I only ask because if you had you would be more experienced on where to place your pressure to where get maxpush without any issues, and then you replicate that on the Lengthmaster( this is just an idea, not sure if vets agree)
 
oldandlively said:
Got it! The frenulum is the victim. Yes, all PE journeyist have this issue. The short or sensitive frenulum is a primarly restricting factor for quite a bit of devices out there. I had mine professionaly removed. Brothers everywhere doing PE have their own frenulum cut through various methods, either by tying, physically cutting with a sharp instrument, or many methods that cause little to no pain.

However, the frenulum doesn't need to be cut to achieve the same effectiveness for the LengthMaster. As you have experienced with the LengthMaster over your foreskin, you get quite a bit of movement. The LengthMaster uses the glans as a stopping block like every other devices. Using the foreskin will allow the sliding to occur over the stopping block, which is your glans.

Also, by trapping blood in the glans like you have in the photo, you have a good large stopping block for the LengthMaster to grip onto. At the same, you also create quite a bit of terminal pressure on the glans that can also cause the bleeding as you to up on traction force. Just something to be aware of. Blood inside the glans must be removed as much as possible to prevent bleeding and blistering.

Alright, let try a different approach this time around. However, do let your wound heal for a couple of days before trying. Exercising with an open wound will delay the healing. Since we are dealing with a sensitive or short frenulum, you have to protected it with a padding. You can use the same Theraband, but fold it into a thick layer, either once or twice. The folded layers allow an extra cushion for your frenulum. I did this ages past when I use the traction device that causes my frenulum to bleed just like yours. Perform the same wrapping technique as before. However, this time, make sure all blood exit the glans. You will literally have a mummy of a penis tip before placing it between the plates.
Click to expand...
Hey Brother,

Thanks for the advice I’m gonna let my penis heel for a few days and gonna start fresh with the way you’ve described.

I just did a session with some extra Thera band padding in the lengthmaster and watched the video of @squirt_inducer_man. This really helped. I had short session but didn’t have any pain at the bottom of the glans and it went quite well.

I’m gonna let the frenulum heal and start doing wrapping the glans better. Let’s see how it will go. Thanks for helping me I’ll let you know how it will go!
 
Abdiel Bull Berg said:
Very concise and detailed description, well written brother, hope it really helps him out.
Click to expand...
Abdiel Bull Berg said:
That’s the spirit brother, eventually you’ll get it done pain free, through trial and error.

And don’t mention it brother, we all need some words of encouragement once in a while, that’s what we brothers are here for, to encourage and learn from each other.
Click to expand...
Thanks for the support brother
 
bemorethanbig said:
So sorry to hear beast, never never should you bleed.

1. I recommend a complete stop until 100% healed
2. I recommend jelqing with coconut oil for 10 minutes prior to your length exercises. my frenulum was acting up during my first PE sessions with water lube (see stats)and I felt like it was holding back my gains before in 2011, now this whole year I've been on coconut oil and I've had zero issues with frenulum expansion
3. Have you ever done Manuals stretches? I only ask because if you had you would be more experienced on where to place your pressure to where get maxpush without any issues, and then you replicate that on the Lengthmaster( this is just an idea, not sure if vets agree)
Click to expand...
Will take it in to account brother thank you!
 
Thebeastymusician said:
Hey Brother,

Thanks for the advice I’m gonna let my penis heel for a few days and gonna start fresh with the way you’ve described.

I just did a session with some extra Thera band padding in the lengthmaster and watched the video of @squirt_inducer_man. This really helped. I had short session but didn’t have any pain at the bottom of the glans and it went quite well.

I’m gonna let the frenulum heal and start doing wrapping the glans better. Let’s see how it will go. Thanks for helping me I’ll let you know how it will go!
Click to expand...
Glad to hear you got a pain free short session, and believe me with the help of the brothers here and you with you keeping on trying you’ll most definitely figure this out in the end.

Good luck with healing your frenulum brother, hope it heals up quick and good.
 
Thebeastymusician said:
Does bleeding slow down the growing?
Click to expand...
I don’t think it would, have gotten a little blood from my urethra when going too hard with manual stretches and it either slowed down growth nor stopped me from continuing.

But heck, I have even pissed blood one time, not because of PE but because I shot up like 5- 6 grams of speed in one day. Didn’t even go to my Doc to get it checked out as it stopped by itself so I don’t get scared at all by just a few drops of blood.
 
Thebeastymusician said:
Thanks brother. Amazing tips here! 🙏
Click to expand...
oldandlively said:
Warm heating fans will dry your skin up, causing less effective healing. Using bacitracin ointment helps more than the fan. Combo of red light then ointment after the light will expedite even faster.

But don't use the red light just for open wound healing. It also boost your cellular regeneration after the routines.
Click to expand...
Is there a certain brand that you like for the bacitracin ointment?
 
I also have no idea how people can work with the lengthmaster every day. I have one and I know it works but it f...ing hurts the head of my penis. Results are a dark purple penis that looks like it's dying. It slips of the head while working out. All very annoying. But like stated above, it just hurts all the time, so don't use it a lot anymore.
 
Bramv said:
I also have no idea how people can work with the lengthmaster every day. I have one and I know it works but it f...ing hurts the head of my penis. Results are a dark purple penis that looks like it's dying. It slips of the head while working out. All very annoying. But like stated above, it just hurts all the time, so don't use it a lot anymore.
Click to expand...

You need to clamp the device all the way down to avoid slippage.
 
  • Like
Reactions: SLO
Bramv said:
I also have no idea how people can work with the lengthmaster every day. I have one and I know it works but it f...ing hurts the head of my penis. Results are a dark purple penis that looks like it's dying. It slips of the head while working out. All very annoying. But like stated above, it just hurts all the time, so don't use it a lot anymore.
Click to expand...
Two effects occur one after the other. If you wrap without pushing all the blood out of the glans, you get discoloration because of the blood trapped for too long. 5 minutes at a time in your sessions to allow blood flow back at first, and increase to 10 minutes once you are conditioned.

The glans is in pain because there is too much blood trapped at the terminal point. That's where quite a bit of nerve ending ended up as well. Just like any traction device, the less blood in the glans, the more comfortable it will be. The vacuum cup device is different.

This leads to slippage. If your glans has blood at the start, once you feel pains from tugging, the glans shrinks. That creates loose wrapping. This causes slippage. This is why most length routines require your penis to be in pure flaccid state as much as possible. The wrapping should be tight and the blood needs to vacate the wrapping area.
 
Hey guys,

I’ve been using sim’s method and I haven’t experienced any bleeding anymore. My new problem is that I feel a lot of pain on my skin when I rotate for the stretch. I figured out that I have less pain when I pull while I rotate so less skin gets trapped I guess.

Another question I have is when do I know I pull hard enough? I try to pull hard but sometimes it’s just hurt too bad that way. I will feel a lot of pressure on my glans and I feel like I’m cutting my skin. Because of that I don’t know if im pulling hard enough. The sensation of the pain is more intense than that of the stretch (if you get what I’m saying)

Hope my brothers can help me. Thanks!
 
Thebeastymusician said:
Hey guys,

I’ve been using sim’s method and I haven’t experienced any bleeding anymore. My new problem is that I feel a lot of pain on my skin when I rotate for the stretch. I figured out that I have less pain when I pull while I rotate so less skin gets trapped I guess.
Click to expand...
Great sign of improve wrapping techniques. Keep at it. You'll find the wrapping flaws and will improve more as you go. It took me a while to get the right techniques as well.

Thebeastymusician said:
Another question I have is when do I know I pull hard enough?
Click to expand...
As a beginner using the LM3, the effective pull should feel a dull achy yank of the internal tissues. Do this. Lay down sideway, bend you leg, tense up as hard as you can by flexing it, and while flexing, straight your leg. You'll feel muscle tissues engaged and being stretched with full achy feeling. This is the point you want aim for. The best angles to achieve this is downward, which is the natural 0° when flaccid. We aim for the range of 0° to roughly 140° as we pull out penis behind and between the butt cheeks. There is a specific angle that your penile tissues and ligaments will respond to within this range.

Thebeastymusician said:
I try to pull hard but sometimes it’s just hurt too bad that way.
Click to expand...
Pain in the tissues, back it off. Pain in the skin, look at you wrapping.

Thebeastymusician said:
I will feel a lot of pressure on my glans and I feel like I’m cutting my skin.
Click to expand...
This is very common as the glans is used as a stopping point. You can use the wrap at the base of the glans to be tighter, but for now, use less traction force to get your glans to used to the pressure. It will take a few weeks to a few months. When I take a long break from not using the LM3, I have to recondition my glans to take the pressure of the traction force I use. It may take me a week to 3.

Thebeastymusician said:
Because of that I don’t know if im pulling hard enough. The sensation of the pain is more intense than that of the stretch (if you get what I’m saying)
Click to expand...
Perfectly. Pain is a bad thing. It tells something is wrong. The feeling should be full and not painful.
 
oldandlively said:
Great sign of improve wrapping techniques. Keep at it. You'll find the wrapping flaws and will improve more as you go. It took me a while to get the right techniques as well.


As a beginner using the LM3, the effective pull should feel a dull achy yank of the internal tissues. Do this. Lay down sideway, bend you leg, tense up as hard as you can by flexing it, and while flexing, straight your leg. You'll feel muscle tissues engaged and being stretched with full achy feeling. This is the point you want aim for. The best angles to achieve this is downward, which is the natural 0° when flaccid. We aim for the range of 0° to roughly 140° as we pull out penis behind and between the butt cheeks. There is a specific angle that your penile tissues and ligaments will respond to within this range.


Pain in the tissues, back it off. Pain in the skin, look at you wrapping.


This is very common as the glans is used as a stopping point. You can use the wrap at the base of the glans to be tighter, but for now, use less traction force to get your glans to used to the pressure. It will take a few weeks to a few months. When I take a long break from not using the LM3, I have to recondition my glans to take the pressure of the traction force I use. It may take me a week to 3.


Perfectly. Pain is a bad thing. It tells something is wrong. The feeling should be full and not painful.
Click to expand...
Is there a possibility I show how I wrap and attach the lengthmaster so you could check if I do anything wrong?
 
This how I wrap, attach and strech. I do 2x 20 mins of downward bundled stretches daily.

I always start to feel the pain when I start to rotate the lengthmaster. It’s a cutting sensation. Maybe it’s because of the dry skin and the little scars I have on the shaft right now. But man it hurts so much. I use the 1% ointment twice daily for more then 2 months now.

I turn the screws as tight as possible. I also added some padding for less slippage like @squirt_inducer_man. Yesterday I added some extra padding to the sides of the chamber of the lengthmaster. Hopefully this will help.

I hope I have enough information for you brothers. I really appreciate the help. (Sorry for the blurry second video if you guys need a better one pls ask)

Thanks!
 

Attachments

Alrighty, I'm compiling a few wrap methods that works well for me. I went through 3 sets and using three different wrapping method. Hope one will help you.

This method is a hybrid of both SIM's and mine. It helps me to deal with uncircumcised wrapping while offering quite a bit of comfort no matter where I strap the plates on.

This is Method 1

Penis wrapping method 1 for LM3.jpg
 
You must log in or register to reply here.
Back
Top