5x5x3 every session expansion

Thanks for the very good device.

The Theraband are almost like 12.5 cm .
So it should be 25 cm yes?

The length can be as long as you want. Select the length that is best for you. I have various lengths that I use.

You have now 18.5 cm flaccid length or streched flaccid length?

That is lightly stretched. It's 16cm in its normal relaxed state. Not so fun trying to keep it from accidentally touching the toilet water line.

My plan is to buy the length master or a allday stretcher .
Its better if you have to choose one the length master with wraps for healing or only the ADS ?

If you have the time at home, use the extender. If you are always on the go, use the stretcher. Just know that the Length Master needs a bit of learning time. Be patient and learn it slowly. Once you master it, it is an invaluable tool.
 
You fold it in three layers ?

Have you an pictire how you fold it in three layers and how you know that it is 900g?
How i can know its 900 g ?

Send me a message on Telegram and I will send a video of how to wrap. My username is @hugegirthh
 
You fold it in three layers ?

Have you an pictire how you fold it in three layers and how you know that it is 900g?
How i can know its 900 g ?

Send me a message on Telegram and I will send you a video of how to wrap. My username is @hugegirthh
 
You fold it in three layers ?

Have you an pictire how you fold it in three layers and how you know that it is 900g?
How i can know its 900 g ?

Send me a message on Telegram and I will send you a video of how to wrap. My username is @hugegirthh
 
Hi
What is the difference between sleeve2 and sleeve5 in your shop?
I want to have a all day long sleeve.

The SiliSleev#2 is considered softer around 3 to 4mm in thickness, while SiliSleev#5 is thicker, around 5mm to 7mm thickness.

The softer sleeves allow you to use the vacuum cups with higher suction, but the trade off is, since it's software, it can be torn much easier. The thicker version is stiffer, but still good with vacuum cups, but since it's thicker, it may pull on your penis a bit more, causing the slippage that most people reported of their penises "turtling" inside the sleeve. My suggestion is, go with the #5 sleeve, and use a bit of TheraBand to prevent that slippage in creating a traction collar around the base of the glans. It doesn't matter if you are circumcised or uncircumcised. The collar helps to reduce and eliminate the slippage as the glans shrinks.

For an all day sleeve, this is just my suggestion, but either a single #5 sleeve with a light wrap, double #5 sleeve for a more rigid wall, or the DuraSleev which is the thickest. It all based on the season as well. If it's hot and humid, my suggestion is using Ace or similar flexible tape wrap. I've been pondering about poking holes all over the larger and looser DuroSleev to achieve aeration, or multiple 0.5cm diameter holes everywhere on the two #5 sleeves to achieve the same 900g of traction while allowing to breath in the heat. Haven't test it yet.
 
The SiliSleev#2 is considered softer around 3 to 4mm in thickness, while SiliSleev#5 is thicker, around 5mm to 7mm thickness.

The softer sleeves allow you to use the vacuum cups with higher suction, but the trade off is, since it's software, it can be torn much easier. The thicker version is stiffer, but still good with vacuum cups, but since it's thicker, it may pull on your penis a bit more, causing the slippage that most people reported of their penises "turtling" inside the sleeve. My suggestion is, go with the #5 sleeve, and use a bit of TheraBand to prevent that slippage in creating a traction collar around the base of the glans. It doesn't matter if you are circumcised or uncircumcised. The collar helps to reduce and eliminate the slippage as the glans shrinks.

For an all day sleeve, this is just my suggestion, but either a single #5 sleeve with a light wrap, double #5 sleeve for a more rigid wall, or the DuraSleev which is the thickest. It all based on the season as well. If it's hot and humid, my suggestion is using Ace or similar flexible tape wrap. I've been pondering about poking holes all over the larger and looser DuroSleev to achieve aeration, or multiple 0.5cm diameter holes everywhere on the two #5 sleeves to achieve the same 900g of traction while allowing to breath in the heat. Haven't test it yet.
Thank you for your post
 
I'm Europe, you can get flagship drop off like Amazon and AliExpress for similar penis sleeves. Look for 4 to 5mm thickness for SiliSleev #2 equivalence, or 6 to 8mm for #5 equivalence.

Unfortunately, there is no DuroSleev equivalence out there.
 
I'm Europe, you can get flagship drop off like Amazon and AliExpress for similar penis sleeves. Look for 4 to 5mm thickness for SiliSleev #2 equivalence, or 6 to 8mm for #5 equivalence.

Unfortunately, there is no DuroSleev equivalence out there.

We ship worldwide, but right now it's this very difficult to get into the middle east. So if you're ordering from israel or anywhere else out there, expect there to be a significant delay
 
We ship worldwide, but right now it's this very difficult to get into the middle east. So if you're ordering from israel or anywhere else out there, expect there to be a significant delay

Way too much tariff right now. July 1, 2027 supposedly the end of the tariff situation. But the next president may extend it.
 
But really are only problems are the middle east.

Nope. Worldwide. To Europe, 25%. China, 50% to 100%. To other parts of Asia, 35%. Canada and South America, 15% to 35%. I ordered my equipment from Sweden, and I got charged an additional 35%.
 
Nope. Worldwide. To Europe, 25%. China, 50% to 100%. To other parts of Asia, 35%. Canada and South America, 15% to 35%. I ordered my equipment from Sweden, and I got charged an additional 35%.
Wow, all that's going on. And I had no deal in my mind that this was happening. Thanks for the update
 
Help Users

You haven't joined any rooms.

    You haven't joined any rooms.
    Back
    Top