Ok wait till you have everything in place
Progress thread SIM's penis enlargement journey
- Thread starter squirt_inducer_man
- Start date
- Status
squirt_inducer_man
(SIM)
I want the best and most professional set up. Take your time and perfect it
squirt_inducer_man
(SIM)
squirt_inducer_man
(SIM)
During my 
SRT 5X5X3 session today, my DIY (Do it yourself) water trap broke. Suddenly I lost vaccum pressure, and I realized that the water trap had imploded.
View attachment 1835989
I like staying at 15 in.Hg vaccum for the last 2 minutes of my set, and I suppose the container couldn't take it any more. My penis overpowered the system.
Warning! Going up to 15 in.Hg vaccum can be dangerous if you're not doing it right, or if you're no used to it.
15 in.Hg vaccum are way above the upper limit of safty. Never go past 12 in.Hg vaccum. You don't need to go over 12 in.Hg vaccum to grow.
My seals with hot glue, and the homemade seal of a pvc tube where all intact (first I thought the seals was broken).
View attachment 1835998 View attachment 1835999
View attachment 1836000 View attachment 1836001
The container had started to shrink together. I pumped up to 15 in.Hg vaccum again and finnished my set. I did all the remaining 2 sets this way, the last 2 minutes the water trap always imploded. But I didn't loose the vaccum to fast so it was safe. But probably risky!!!, should have use another/"new" container.
It was good I made this prototype (doing this for the brotherhood) because this change everything. I can not any longer rely on these cheap containers for my water trap.
I put a lot of work into it as well. I have more of these containers (I get them for free where I buy my supplements).
Maybe it was to old. But they do not have this version any longer now. They have transition to smartshake containers now. These seams stronger and thicker.
The customized lid with the hose connectors I created do not fit on these smartshake containers (other thread design + dimensions).
It can only be better from here. I suppose this
is how it goes when inventing new systems and solutions. I have never developed anything like this before, but I'm learning alot in the process. I even bought wrong parts from China. I believe in the end this water trap design will be prefected.
The water trap should be able to handle at least 20 in.Hg vaccum pressure even if no one will never go there. I think it's good to have margins in the design.
I have many ideas, and even have an idea of using a professional vaccum container but that system would cost over 200 USD to slap together (due to shipment costs) here in Sweden (can't afford that = can afford it, but doesn't feel worth it).
And the container would be 1.2 Liter big. This system would be very stupidly overengineerd. (Definition of: overengineer).
Here are some picures and videos from my session.
View attachment 1835990
I put an empty Vaseline container inside my water
trap in order to prevent the water trap, from imploding too much.
View attachment 1835991
Sorry for the blurry picture, there was alot of Vaseline® (PROTECTING JELLY) and moisture on the camera lenses.
You see that I'm at 15 in.Hg vaccum pressure, as I said before I do not recommend anyone to be this high.
@kriskros
I made you two short video of the Downward C-Jelq's on the side of the penis (reduce fluid retention).
These C-Jelq's helps me reduce my fluid retention between sets. You also do not need to be fully erected when doing them, as the purpose is mostly just to get rid of the fluid retention. I like doing them erected as much as possible.
If you combine this with Slow Squash Jelq's (Video instruction), your sessions will be unbeatable. 
I never stay more then 5 minutes inside the pump as well.
Video 1
View attachment 1835992
Video 2
View attachment 1835993
There are some Vaseline® on my finger in Video 2. I use to much Vaseline (PROTECTING JELLY). As I have said before I need to scrub the floor in the shower after session.
I need to start using less because this is expensive. But the water dilute it, so I need to apply more. A good thing with Vaseline® is that it lubricate all the O-rings and seals as well. Just wash everything with a mild hand soap, after session.
Sometimes I use dish soap to get rid of all the Vaseline®, but do not like that because it can dry everything up (O-rings, hose...).
View attachment 1835996
Important message to make the valves last as long as possible.
Make sure you press on the female valve connector before disconnect or connecting your cylinder or pump handle.
This is to protect the O-rings from getting damage.
View attachment 1835997
Press and hold it!
I have tried 10 minutes before with Bathmate HydroExtreme 7 Wide Boy (VacuVin modification), but this created to much fluid retention, so for me it's not really worth it.
Just wanted to give all of you an update on my progress. I will soon be able to measure my girth/circumferences, I can't wait.
Take care and grow big.
SRT 5X5X3 session today, my DIY (Do it yourself) water trap broke. Suddenly I lost vaccum pressure, and I realized that the water trap had imploded.View attachment 1835989
I like staying at 15 in.Hg vaccum for the last 2 minutes of my set, and I suppose the container couldn't take it any more. My penis overpowered the system.
Warning! Going up to 15 in.Hg vaccum can be dangerous if you're not doing it right, or if you're no used to it.15 in.Hg vaccum are way above the upper limit of safty. Never go past 12 in.Hg vaccum. You don't need to go over 12 in.Hg vaccum to grow.
My seals with hot glue, and the homemade seal of a pvc tube where all intact (first I thought the seals was broken).
View attachment 1835998 View attachment 1835999
View attachment 1836000 View attachment 1836001
The container had started to shrink together. I pumped up to 15 in.Hg vaccum again and finnished my set. I did all the remaining 2 sets this way, the last 2 minutes the water trap always imploded. But I didn't loose the vaccum to fast so it was safe. But probably risky!!!, should have use another/"new" container.
It was good I made this prototype (doing this for the brotherhood) because this change everything. I can not any longer rely on these cheap containers for my water trap.
I put a lot of work into it as well. I have more of these containers (I get them for free where I buy my supplements).
Maybe it was to old. But they do not have this version any longer now. They have transition to smartshake containers now. These seams stronger and thicker.
The customized lid with the hose connectors I created do not fit on these smartshake containers (other thread design + dimensions).
It can only be better from here. I suppose this
is how it goes when inventing new systems and solutions. I have never developed anything like this before, but I'm learning alot in the process. I even bought wrong parts from China. I believe in the end this water trap design will be prefected.
The water trap should be able to handle at least 20 in.Hg vaccum pressure even if no one will never go there. I think it's good to have margins in the design.
I have many ideas, and even have an idea of using a professional vaccum container but that system would cost over 200 USD to slap together (due to shipment costs) here in Sweden (can't afford that = can afford it, but doesn't feel worth it).
And the container would be 1.2 Liter big. This system would be very stupidly overengineerd. (Definition of:
overengineer). Here are some picures and videos from my session.
View attachment 1835990
I put an empty Vaseline container inside my water
trap in order to prevent the water trap, from imploding too much.
View attachment 1835991
Sorry for the blurry picture, there was alot of Vaseline® (PROTECTING JELLY) and moisture on the camera lenses.
You see that I'm at 15 in.Hg vaccum pressure, as I said before I do not recommend anyone to be this high.
@kriskros
I made you two short video of the
Downward C-Jelq's on the side of the penis (reduce fluid retention).These C-Jelq's helps me reduce my fluid retention between sets. You also do not need to be fully erected when doing them, as the purpose is mostly just to get rid of the fluid retention. I like doing them erected as much as possible.
If you combine this with
Slow Squash Jelq's (Video instruction), your sessions will be unbeatable. I never stay more then 5 minutes inside the pump as well.
Video 1
View attachment 1835992
Video 2
View attachment 1835993
There are some Vaseline® on my finger in Video 2. I use to much Vaseline (PROTECTING JELLY). As I have said before I need to scrub the floor in the shower after session.
I need to start using less because this is expensive. But the water dilute it, so I need to apply more. A good thing with Vaseline® is that it lubricate all the O-rings and seals as well. Just wash everything with a mild hand soap, after session.
Sometimes I use dish soap to get rid of all the Vaseline®, but do not like that because it can dry everything up (O-rings, hose...).
View attachment 1835996
Important message to make the valves last as long as possible.
Make sure you press on the female valve connector before disconnect or connecting your cylinder or pump handle.
This is to protect the O-rings from getting damage.
View attachment 1835997
Press and hold it!
I have tried 10 minutes before with Bathmate HydroExtreme 7 Wide Boy (VacuVin modification), but this created to much fluid retention, so for me it's not really worth it.
Just wanted to give all of you an update on my progress. I will soon be able to measure my girth/circumferences, I can't wait.
Take care and grow big.
Attachments
Last edited:
Wow. A thick wall protein shaker imploded. That's crazy! This is why I suggested the one way valve to allow susdenrl air surge into the container without impacting the pressure in the pump cylinder.
squirt_inducer_man
(SIM)
squirt_inducer_man
(SIM)
This was harder then I thought! But I will figure something out in the end.
You're making me wonder if I need to revisit my calculations. I have so many free containers at the ready after doing preliminary pressure testingw, and now I second guess myself. I have thin wall from 1.5mm to thick ones at 3mm. All sustained 20inHg vacuum for continuous 20 minutes. I may have to increase it to 2 hours instead.
squirt_inducer_man
(SIM)
New video instructions in my video instruction thread (2 videos).
Post in thread 'SIM's videos and instructions' https://mattersofsize.com/threads/sims-videos-and-instructions.1830511/post-1966113
Post in thread 'SIM's videos and instructions' https://mattersofsize.com/threads/sims-videos-and-instructions.1830511/post-1966113
squirt_inducer_man
(SIM)
Maybe it's diffrent if the vaccum pressure is variable, and are going up and down from 10 in.Hg to 15 in.Hg, because that was what I was doing.
Back and forth between 10 in.Hg near 15 in.Hg until the last 2 minutes where I was hitting 15 in.Hg. Have been doing this for some time, but today my penis felt perfectly fine, and before it felt injured from doing 15 in.Hg after session. Seems like I'm getting used to it. I know the dangers! I'm careful.
squirt_inducer_man
(SIM)
Don't do this I'm insane!!!!!
The reason why you can go up that high without feeling the fatigue or pain is because your Length Master training conditioned your tissues, blood vessels, and nerves during the explosive growth period. You're not insane. You're conditioned. But, the pressure is pretty freakishly high. I went up there to test as well. My penis can handle it, but blister forms immediately after a certain amount of time. But do test in a dynamic pressure state. Just like the $20k machine, air pressure going up and down every 10 to 15 seconds burst does just that. It's just enough to create tissue tearing. In reality, it's collagen displacement and disruption (a mouthful). Just don't stay at that high pressure zone for too long. Rise and drop, creeping style.
I talked to a few colleagues about the fast actions vs slow. Both have benefits, and both have downsides. However, the slower method assists with greater internal tissues expansion and elongation than the fast. Fast actions can rip the nerves and blood vessels before they can get a chance to properly adapt to the stress loads.
squirt_inducer_man
(SIM)
Interesting! I will probably need to be careful. I don't believe there is no need to be over 12 in.Hg vaccum pressure at all. Doing the creeping style.
I was for sure conditioned with the lengthmastering, after your explanation above. I just feel lucky that my penis had enough time to heal and recover. Oh man what even happened. One year it took.
Oh man. From now on I will take the safe slow route.
I know you will
squirt_inducer_man
(SIM)
I will take a rest period now.
squirt_inducer_man
(SIM)
I just realized that I need a wider cylinder.
My penis is trying to expand out of the cylinder. Not particularly comfortable.
View attachment 1836044
View attachment 1836047
Also I realized that MityVac 2.5" cylinder is not big for my upward curved penis. The MityVac 2.5" fits inside the Bathmate® HydroExtreme 11, and I was using that pump before I started using MityVac in order to not be limited by the girth expansion so much. My upward curvature makes this "problem" bigger, then it would be if my penis was straight as an arrow.
View attachment 1836045
See the MityVac 2.5" tube fits inside the Bathmate© HydroExtreme 11.
View attachment 1836048
Picture from the top: In Bathmate© HydroExtreme 11, I get much more girth expansion in this pump, in comparison to a 2.5" cylinder due to the excessive space to expand in girth/width. My penis also have more room to curve upward and this makes it easier to force girth expansion at the width. This is at least my theory based on the fact that the penis expands like a balloon.
If no room in girth/width = more length expansion, and if there is more room for expansion in girth/width you will see less expansion in length. The upward curvature and expansion also limit length expansion and will therefore increase the width/girth expansion.
This is something to think about.
View attachment 1836049
What I will do for now is to alternate between MityVac 2.5" and Bathmate® HydroExtreme 11, but a 3" MityVac cylinder would be much nicer so I do not have to deal with the rubber creases in Bathmate. But will not put money on this.
I can just keep pumping with MityVac 2.5" cylinder and just enjoy it. I have some diffrent pumps now to choose from. It's good to have diffrent sized cylinders to pump with, in that way you can alternate between the wider and the more narrow cylinder/pump, and in that way be able to force expansion throughout your shaft towards the glans.
This is a method I have been using throughout my penis enlargement journey and it has been working for me. Without these different size pumps, I would never have seen this growth. Having a banana penis is not always easy.
If I could go back and know what I know today, I would tell myself to get MityVac immediately. So much money had been saved. But water pumping is a must. I have never got a blister or thrombosis vain from pumping.
But I believe if I hadn't went the Bathmate route first I would never have the penis and experience I have today. I would not have found mattersofsize.com that is for sure. Bathmate helped me to realize the truth about penis enlargement.
I only share this to help others.
My penis is trying to expand out of the cylinder. Not particularly comfortable.
View attachment 1836044
View attachment 1836047
Also I realized that MityVac 2.5" cylinder is not big for my upward curved penis. The MityVac 2.5" fits inside the Bathmate® HydroExtreme 11, and I was using that pump before I started using MityVac in order to not be limited by the girth expansion so much. My upward curvature makes this "problem" bigger, then it would be if my penis was straight as an arrow.
View attachment 1836045
See the MityVac 2.5" tube fits inside the Bathmate© HydroExtreme 11.
View attachment 1836048
Picture from the top: In Bathmate© HydroExtreme 11, I get much more girth expansion in this pump, in comparison to a 2.5" cylinder due to the excessive space to expand in girth/width. My penis also have more room to curve upward and this makes it easier to force girth expansion at the width. This is at least my theory based on the fact that the penis expands like a balloon.
If no room in girth/width = more length expansion, and if there is more room for expansion in girth/width you will see less expansion in length. The upward curvature and expansion also limit length expansion and will therefore increase the width/girth expansion.
This is something to think about.
View attachment 1836049
What I will do for now is to alternate between MityVac 2.5" and Bathmate® HydroExtreme 11, but a 3" MityVac cylinder would be much nicer so I do not have to deal with the rubber creases in Bathmate. But will not put money on this.
I can just keep pumping with MityVac 2.5" cylinder and just enjoy it. I have some diffrent pumps now to choose from. It's good to have diffrent sized cylinders to pump with, in that way you can alternate between the wider and the more narrow cylinder/pump, and in that way be able to force expansion throughout your shaft towards the glans.
This is a method I have been using throughout my penis enlargement journey and it has been working for me. Without these different size pumps, I would never have seen this growth. Having a banana penis is not always easy.
If I could go back and know what I know today, I would tell myself to get MityVac immediately. So much money had been saved. But water pumping is a must. I have never got a blister or thrombosis vain from pumping.
But I believe if I hadn't went the Bathmate route first I would never have the penis and experience I have today. I would not have found mattersofsize.com that is for sure. Bathmate helped me to realize the truth about penis enlargement.
I only share this to help others.
Attachments
squirt_inducer_man
(SIM)
I just wanted to login and share my progress.
I'm starting to get uncomfortable sharing pictures of my penis, but I thought them would help if someone else are dealing with this upward curve and pumping situation.
I'm working on figuring out a comersial solution for a bigger water trap (MityVac Hydro-Vac Penis Pump) for @DLD and this brotherhood. You need a bigger water trap to make pumping efficient.
But it will take some time. I ordered the wrong parts, but it was hard to picture what I needed when I didn't had anything. Need to make sure the measurements work with the MityVac cylinders and vaccum pump handle. I even ordered the wrong tubing. I do not promise anything, but I do will do my best.
There will be some time until I can give an update on this.
Take care, and thank you all for everything.
I'm starting to get uncomfortable sharing pictures of my penis, but I thought them would help if someone else are dealing with this upward curve and pumping situation.
I'm working on figuring out a comersial solution for a bigger water trap (MityVac Hydro-Vac Penis Pump) for @DLD and this brotherhood. You need a bigger water trap to make pumping efficient.
But it will take some time. I ordered the wrong parts, but it was hard to picture what I needed when I didn't had anything. Need to make sure the measurements work with the MityVac cylinders and vaccum pump handle. I even ordered the wrong tubing. I do not promise anything, but I do will do my best.
There will be some time until I can give an update on this.
Take care, and thank you all for everything.
No worries brother. I'm working side by side with you on this project. I'm waiting on one more part that supposedly coming within this week. It worried me that the container imploded early, even with a 2 to 2.5mm thickness. I went ahead and purchases a 2 to 2.2mm thick 64oz water container with a moderate size mouth to test. I believe I also found a 1000mL size (~33oz) on AliExpress designed to handle chemical type liquids, with thick walls. I will do step by step instruction and testing phases for MOS to mirror, leading to production or DIY for brothers that like to take this project for the fun of it.
- Status